• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2003

콘크리트의 가격이 상대적으로 높고 콘크리트 부재의 중량이 중요시되는 곳에서 중공 기둥을 사용하는 것이 경제적이다. 낮은 축력비와 적당한 종방향 철근비에서의 중공기둥은 원형 R.C 기둥과 유사한 휨강도와 연성능력을 갖는다. 그러나 높은 종방향 철근비와 축력비를 갖는 중공기둥 안쪽면에서의 구속력 부족으로 인한 압괴로 취성적인 거동을 보인다. 그래서 중공기둥의 안쪽면에 강관을 삽입한다면 기둥의 취성적인 거동을 방지할 수 있다. 본 연구에서는 콘크리트 교각의 내부에 강관을 삽입하여, 재료비의 절감과 중량의 감소 및 중공교각의 연성을 증가시키고, 이의 해석을 위해 강관의 삽입효과를 나타낼 수 있는 해석 프로그램을 개발하여, 상용 프로그램의 원형기둥 및 중공기둥의 해석치와 비교하여 타당성을 입증하였다. 휨강도와 연성을 표현하기 위해서는 모멘트-곡률 해석법이 사용되었으며, 콘크리트의 구속효과를 나타내기 위해 Mander의 통합된 콘크리트 모델이 사용되었다. 이러한 결과를 토대로 하여 매개변수 해석을 수행하여 강관 보강 중공 R.C 기둥의 거동특성을 연구하였다.

• 해양환경안전학회지
• /
• 제28권2호
• /
• pp.414-421
• /
• 2022

해저 석유와 가스 탐사가 점점 더 깊은 수심으로 진행되고 있으며, 해저 파이프라인은 고압 및 고온 조건에서 작동하는 것이 일반적이다. 온도 및 압력 차이로 인하여 파이프 축 방향 힘이 축적되는 현상이 있다. 이러한 현상은 파이프라인을 구속하는 해저면 효과 때문에 파이프라인은 횡 좌굴이 발생하게 된다. 온도가 증가하는 경우 축 방향의 압축 하중이 가해지며 이 하중이 임계 수준에 도달하면 파이프가 수직방향으로 움직이게 된다. 또는 파이프라인의 구조적 완전성을 위태롭게 할 수 있는 횡 방향 좌굴이 발생하는 상황에서, 작동 중 파이프라인의 구조적 안전함을 보장하기 위해 파이프라인의 상세 구조 강도평가가 수행되어야 한다. 본 연구에서는 해저면의 마찰 효과 및 재료의 열 수축/팽창을 고려한 비선형 구조해석을 상용 유한요소해석 프로그램인 ANSYS를 활용하여 검토하였으며, 외부충격에 의한 횡 방향 좌굴 안전성을 분석하였다. 본 연구의 결과를 통하여 수치 해석적 단순화된 분석 모델을 통하여 해저면의 효과를 고려한 조건에서의 실제 파이프라인의 붕괴 조건을 예측할 수 있다.

• 한국강구조학회 논문집
• /
• 제29권1호
• /
• pp.81-88
• /
• 2017

확장단부판 접합부는 강구조물의 보-기둥 접합부 혹은 변단면 부재로 구성된 PEB 구조시스템에 적용되는 접합부의 한 형태이다. 확장단부판 접합부는 접합부를 구성하는 단부판의 두께, 고장력볼트의 게이지 거리, 고장력볼트 축부의 직경, 고장력볼트의 개수 등의 영향으로 상이한 거동특성을 나타낸다. 확장단부판 접합부는 미국 및 유럽 등지에서는 다양한 형태로 강구조물의 기둥-보 접합부에 적용되고 있으나 우리나라에서는 널리 적용되고 있지 않다. 이러한 이유로는 확장단부판 접합부에 대한 설계강도식 제안, 접합부상세 제안, 내진성능 평가, 제작 및 시공지침서 개발 등이 적절히 이루어지지 못하고 있기 때문이다. 따라서 이 연구는 비보강 확장단부판 접합부의 국내 적용을 위한 기초자료를 제공하기 위하여 진행하였다. 이를 위하여 두께 12mm의 비보강 확장단부판에 대한 비선형 유한요소해석 및 실험을 수행하였다.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.181-202
• /
• 1999

Dynamic response of axisymmetric arbitrary laminated composite cylindrical shell of finite length, using three-dimensional elasticity equations are studied. The shell is simply supported at both ends. The highly coupled partial differential equations are reduced to ordinary differential equations (ODE) with variable coefficients by means of trigonometric function expansion in axial direction. For cylindrical shell under dynamic load, the resulting differential equations are solved by Galerkin finite element method, In this solution, the continuity conditions between any two layer is satisfied. It is found that the difference between elasticity solution (ES) and higher order shear deformation theory (HSD) become higher for a symmetric laminations than their unsymmetric counterpart. That is due to the effect of bending-streching coupling. It is also found that due to the discontinuity of inplane stresses at the interface of the laminate, the slope of transverse normal and shear stresses aren't continuous across the interface. For free vibration analysis, through dividing each layer into thin laminas, the variable coefficients in ODE become constants and the resulting equations can be solved exactly. It is shown that the natural frequency of symmetric angle-ply are generally higher than their antisymmetric counterpart. Also the results are in good agreement with similar results found in literatures.

• Structural Engineering and Mechanics
• /
• 제24권4호
• /
• pp.429-446
• /
• 2006

Experimental investigation was conducted to evaluate the seismic ductility of earthquake-experienced concrete columns with an aspect ratio of 2.5. Eight circular concrete columns with a diameter of 600 mm were constructed with three test parameters: confinement ratio, lap-splice of longitudinal bars, and retrofitting with Fiber Reinforced Polymer (FRP) materials. The objective of this research is to examine the seismic performance of RC bridge piers subjected to a Quasi static test (QST), which were preliminary tested under a series of artificial earthquake motions referred to as a Pseudo dynamic test (PDT). The seismic enhancement effect of FRP wrap was also investigated on these RC bridge piers. Six specimens were loaded to induce probable damage by four series of artificial earthquakes, which were developed to be compatible with earthquakes in the Korean peninsula by the Korea Highway Corporation (KHC). Directly after the PDT, six earthquake-experienced columns were subjected to inelastic cyclic loading under a constant axial load of $0.1{f_c}^{\prime}A_g$. Two other reference specimens without the PDT were also subjected to similar quasi-static loads. Test results showed that specimens pre-damaged by moderate artificial earthquakes generally demonstrated good residual seismic performance, which was similar to the corresponding reference specimen. Moreover, RC bridge specimens retrofitted with wrapping fiber composites in the potential plastic hinge region exhibited enhanced flexural ductility.

• 국제초고층학회논문집
• /
• 제5권1호
• /
• pp.21-30
• /
• 2016

The structural efficiency of tall buildings heavily depends on the lateral stiffness and resistance capacity. Among those structural systems for tall buildings, outrigger system is one of the most common and efficient systems especially for those with relatively regular floor plan. The use of outriggers in building structures can be traced back from early 50 from the concept of deep beams. With the rise of building height, deep beams become concrete walls or now in a form of at least one story high steel truss type of outriggers. Because of the widened choice in material to be adopted in outriggers, the form and even the objective of using outrigger system is also changing. In the past, outrigger systems is only used to provide additional stiffness to reduce drift and deflection. New applications for outrigger systems now move to provide additional damping to reduce wind load and acceleration, and also could be used as structural fuse to protect the building under a severe earthquake condition. Besides analysis and member design, construction issue of outrigger systems is somehow cannot be separated. Axial shortening effect between core and perimeter structure is unavoidable. This paper presents a state-of-the-art review on the outrigger system in tall buildings including development history and applications of outrigger systems in tall buildings. The concept of outrigger system, optimum topology, and design and construction consideration will also be discussed and presented.

• Structural Monitoring and Maintenance
• /
• 제3권4호
• /
• pp.349-375
• /
• 2016

The tension of an arch bridge hanger is estimated using a number of experimentally identified modal frequencies. The hanger is connected through metallic plates to the bridge deck and arch. Two different categories of model classes are considered to simulate the vibrations of the hanger: an analytical model based on the Euler-Bernoulli beam theory, and a high-fidelity finite element (FE) model. A Bayesian parameter estimation and model selection method is used to discriminate between models, select the best model, and estimate the hanger tension and its uncertainty. It is demonstrated that the end plate connections and boundary conditions of the hanger due to the flexibility of the deck/arch significantly affect the estimate of the axial load and its uncertainty. A fixed-end high fidelity FE model of the hanger underestimates the hanger tension by more than 20 compared to a baseline FE model with flexible supports. Simplified beam models can give fairly accurate results, close to the ones obtained from the high fidelity FE model with flexible support conditions, provided that the concept of equivalent length is introduced and/or end rotational springs are included to simulate the flexibility of the hanger ends. The effect of the number of experimentally identified modal frequencies on the estimates of the hanger tension and its uncertainty is investigated.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.221-228
• /
• 1997

이 논문은 일정체적 단순지지 보-기둥의 동적 최적단면의 결정에 관한 연구이다. 정다각형 단면의 단면깊이가 포물선으로 변화하는 보-기둥에 대한 자유진동을 지배하는 상미분방정식을 유도하였다. 이 미분방정식에는 축하중효과를 고려하였고, Runge-Kutta method와 Regula-Falsi method를 이용하여 미분방정식을 수치적분하고 고유진동수를 산출하였다. 수치해석 결과로부터 얻어진 진동수-단면비 곡선의 임계값들을 분석하여 동적 최적단면을 결정하고 이 결과들을 표 및 그림에 나타내었다.

• Structural Engineering and Mechanics
• /
• 제36권2호
• /
• pp.197-206
• /
• 2010

The purpose of this paper is to carry out both experimental and theoretical investigations of R.C. short column subjected to horizontal forces under constant compressive loading. Eight specimens with section of 40 cm ${\times}$ 40 cm, height 40 cm and 50 cm and different type hoop were used of the steel cage to detect the seismic behavior of reinforced concrete short columns. Hoop spacing of column, strength of concrete, and the axial load of experiments were the three main parameters in this test. A series of equations were derived to reveal the theory could be used on analysis short column, too. Through test failure model of R.C short column being established, the type of hoop affects the behavior R.C short column in ductility rather than in strength. And the effect of analysis by Truss Model is evident and reliable in shear failure model of short column.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.36-45
• /
• 1996

Fatigue strength of the spot welded lap joint is considerably influenced by corrosive environments. Particularly, the chloride and the sulfide are most injurious to strength of the spot welded lap joint. Therefore, there is a need to evaluate its effect to corrosion fatigue strength for safe life design of spot welded structures. In order to evaluate their corrosion fatigue strength, corrosion fatigue tests on the spot welded lap joints of the uncoated and the coated high strength steel sheets were conducted in air and in 10% NaCl solution. Corrosion fatigue strength of the uncoated specimens were entirely lower than the coated one in NaCl solution, but those of the coated specimens in NaCl solution were lower than in air. And stress distribution in single spon welded lap joint subjected to tension-shear load was investigated by the finite element method. Using these results, we tried to evaluate corrosion fatgue strength of the various spot welded lap joints with maximum stress $\sigma_{max}$ at edge on loading side of the spot welded lap joint. We could find that corrosion fatigue strength could be quantitatively and systematically rearranged by $\sigma_{max}$.