• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2078-2081
• /
• 2003

This paper presents the studies on prediction models of tropospheric scintillation. The prediction scintillation models are Karasawa and ITU-R , which can be improved for different locations and circumstances. In this paper, the investigation of average time between variance ${\sigma}_n\;^2$ and the wet part of refractivity $N_{wet}$ under various conditions of meteorological parameters have been carried out at King Mongkut’s Institute of Technology Lankrabang , Bangkok , Thailand , in the range of Ku-band (12.260 GHz) on high elevation angle from Thaicom2 satellite. From the studies results shows that average period of time of 30 days are best suitable for find out the relation between average time variance ${\sigma}_n\;^2$ and the wet part of refractivity $N_{wet}$ according to Karasawa model, the average time variance is express as ${\sigma}_n\;^2=(0.003N_{wet}-0.1313)^2$ , the appropriation model for occurrence of scintillation has been analyzed and experimental results are carried out.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.83-89
• /
• 2004

The importance of the Load Power Factor(LPF) management is newly noticed from the voltage management and operation of the power system due to the rapidly increasing reactive power consumed. Therefore, this paper proposes the regional, seasonal and hourly Representative Model of Load Power Factor(RMLPF) considering load characteristics of all 154/22.9[kV] substations. The RMLPF is used to present a precision improvement of power system analysis and security. Computation of representative model of load utilizes the average flow method based on moving average method. The Energy Management System(EMS) data are used as the source to assess the load power factor.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.2
• /
• pp.83-91
• /
• 2018

With the development of IT (Information Technology) technology, embedded system and network technology are combined and used in various environments such as military environment as well as everyday life. In this paper, we propose a new airdropped distributed mobility model (ADMM) modeling the dispersion falling of the direct shot of a cluster bomb, and we compare and analyze some representative MANET routing protocols in ADMM in ns-3 simulator. As a result of the analysis, we show OLSR routing protocol is promising in ADMM environment in the view points of packet delivery ratio (PDR), end to end delay, and jitter. In addition, we propose a new adaptation scheme for OLSR, AND-OLSR (Average Node Distance based adaptive-OLSR) to improve the original OLSR in ADMM environment. The new protocol calculates the average node distance, adapts the period of the control message based on the average node distance increasing rate. Through the simulation study, we show that the proposed AND-OLSR outperforms the original OLSR in PDR and control message overhead.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.93-101
• /
• 2007

Aluminum alloy which is one of the light materials has been tried to apply to light weight vehicle body. In order to do that, welding technology is very important. In case of the aluminum laser welding, the strength of welded part is reduced due to porosity, underfill, and magnesium loss. To overcome these problems, laser welding of aluminum with filler wire was suggested. In this study, experiment about laser welding of AA5182 aluminum alloy with AA5356 filler wire was performed according to process parameters such as laser power, welding speed and wire feed rate. The tensile strength was measured to find the weldability of laser welding with filler wire. The models to estimate tensile strength were suggested using three regression models and one neural network model. For regression models, one was the multiple linear regression model, another was the second order polynomial regression model, and the other was the multiple nonlinear regression model. Neural network model with 2 hidden layers which had 5 and 3 nodes respectively was investigated to find the most suitable model for the system. Estimation performance was evaluated for each model using the average error rate. Among the three regression models, the second order polynomial regression model had the best estimation performance. For all models, neural network model has the best estimation performance.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.969-977
• /
• 2016

Climate change affects the growth of crops which were planted especially in fields, and it becomes more important to use climate data to predict the yields of the major vagetables. The variation of the crop products caused by climate change is one of the significant factors for the discrepancy of the demand and supply, and leads to the price instability. In this paper, using a panel regression model, we predicted the garlic yields with the weather conditions of different regions. More specifically we used the panel data of the several climate variables for 15 main garlic production areas from 2006 to 2015. Seven variables (average temperature, average maximum temperature, average minimum temperature, average surface temperature, cumulative precipitation, average relative humidity, cumulative duration time of sunshine) for each month were considered, and most significant 7 variables were selected from the total 84 variables by the stepwise regression. The random effects model was chosen by the Hausman test. The average maximum temperature (January), the cumulative precipitation (March, October), the cumulative duration time of sunshine (April, October) were chosen among the variables as the significant climate variables of the model

• MALSORI
• /
• no.59
• /
• pp.89-99
• /
• 2006

This paper proposes a new structural head-related transfer function(HRTF) model to produce sounds in a virtual environment. The proposed HRTF model generates 3-D sounds by using a head model, a pinna model and the proposed distance model for azimuth, elevation, and distance that are three aspects for 3-D sounds, respectively. In particular, the proposed distance model consists of level normalization block distal region model, and proximal region model. To evaluate the performance of the proposed model, we setup an experimental procedure that each listener identifies a distance of 3-D sound sources that are generated by the proposed method with a predefined distance. It is shown from the tests that the proposed model provides an average distance error of $0.13{\sim}0.31$ meter when the sound source is generated as if it is 0.5 meter $\sim$ 2 meters apart from the listeners. This result is comparable to the average distance error of the human listening for the actual sound source.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.2
• /
• pp.109-119
• /
• 1999

The average shadow price is a substitute for the traditional marginal shadow price. It can serve as a standard for decision making problems about the economic resources where the marginal analysis gives no useful information. This paper treats the average shadow price in pure integer programming and shows some stability properties of it. This implies that the values of the average shadow prices once computed are reliable within some extent of the data perturbations of the integer programming model.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.4
• /
• pp.945-953
• /
• 2007

In this paper, we propose a smoothing and thus noise-reducing method of data sequences for stock price prediction with hidden Markov models, HMMs. The suggested method just uses simple moving average. A proper average size is obtained from forecasting experiments with stock prices of bank sector of Korean Exchange. Forecasting method with HMM and moving average smoothing is compared with a conventional method.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.6-17
• /
• 2009

Objective: The purpose of this study was to evaluate the possibility of using a digital model and cone beam computed tomograph(CBCT) image for model analysis. Methods: Model analyses of CBCT images, plaster models, and digital models of 20 orthodontic patients with a permanent dentition with no proximal metal restorations, were compared. Results: The average differences of tooth size measurements were 0.01 to 0.20 mm, and the average difference of arch length discrepancy measurements were 0.41 mm in the maxilla and 0.82 mm in the mandible. The difference in Bolton discrepancy measurements was 0.17 mm for the anterior region and 0.44 mm overall but with no statistically significant difference. When comparing CBCT images with plaster models, the average differences in tooth size measurements were -0.22 to 0.01 mm, and the average differences in arch length discrepancy measurements were 0.43 mm in the maxilla and 0.32 mm in the mandible. Difference in Bolton discrepancy measurements were 0.35 mm in the anterior region and 1.25 mm overall. CBCT images showed significantly smaller overall Bolton discrepancy measurements. Conclusions: Although there were statistically significant differences in some model analysis measurements, the ranges of measurement errors of the digital model and CBCT images were clinically acceptable. Therefore, a digital model and CBCT image can be used for model analysis.