• 토지주택연구
• /
• 제10권3호
• /
• pp.57-66
• /
• 2019

In this study, the author suggests utilizing unsold and unused land as temporary commercial parking lots as a way to raise funds for active public transport use. In addition, reasonable parking fee scheme is suggested by estimating marginal parking fee and marginal parking distance for the commercial parking lots based on the CVM. The author conducts a survey to investigate citizens' opinion on utilizing unsold and unused land in the urban development project area as temporary commercial transport facilities such as parking lots. Based on survey outcome, travel behavior and requirements are analyzed and marginal parking fee and marginal parking distance are estimated through the Contingent Valuation Method (CVM). The results are as follows: in the single-bounded dichotomous choice model, people are willing to pay 216 KRW for 165m in average for 10 minutes and their willingness to pay goes down against reaching distance to the parking lots from 365 KRW for 50m, 295 KRW for 100m, 173 KRW for 200m, and 51 KRW for 300m; in the double-bounded dichotomous choice model, people are willing to pay 285 KRW for 165m in average for 10 minutes and their willingness to pay goes down as well against reaching distance to the parking lots from 310 KRW for 50m, 297 KRW for 100m, 272 KRW for 200m and 248 KRW for 300m. It is clearly appeared that people's willingness to pay goes higher as distance to reach the parking lots goes shorter.

• 건축역사연구
• /
• 제14권4호
• /
• pp.73-86
• /
• 2005

The purpose of this study is to prove the correlations among various factors what determined to formation of front elevation proportion system through making an actual survey and investigating. According to the analysis of them, we make conclusions as follows; 1, On the assumption that average distance of 1Kan(間) is 1, the height of foundation is 0.21, the height of floor from foundation is 0.24, the height of normal column from floor is 0.85, the height of eaves from foundation is 1.10. 2. Southeast faced buildings are wider than southwest faced buildings in the distance of 1Kan (間) in the range of $110{sim}220mm$. The height of foundation and floor in the southeast faced buildings are higher than those in southwest faced buildings beside the height of normal column, eaves, high column in the southwest faced buildings are higher than those in southeast faced buildings. 3. As number of front Kan(間) increases, the distance of 1Kan(間) decrease and the height of eaves and high column(高柱) increases. This is cause of making a maximum needed inner space by increasing the distance of 1Kan(間). This is an wisdom for living from ancestors. 4. As number of Dori(道里) increases, the distances of 1Kan are nearly same but the height of eaves and high column(高柱) increases about 300mm, This is a natural result from an increasing of building scale. 5. The distance of 1Kan(間) in later 19C building is most wide but, the unit heights are minimal average values at year 1900 as a reference mark. After this, the height of normal column, eaves, high column are higher about $170{sim}330mm$. 6. The number of Kan in front elevation, Dori(道里), and direction of building have correlations each other in proportion system of traditional housing An-Chae with significant level, p<0.05.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.248-254
• /
• 2014

계층 회의는 회의에 참가한 단말기 간 교환되는 데이터가 계층 구조로 전달되기 때문에 정보 지연이 발생되게 된다. 본 논문에서, 단말기 사이의 평균 경로 거리를 최소화하고 단말기의 컴퓨터 자원을 고려하여 비점진적 계층 회의를 구성하는 새로운 방법을 제안하고자 한다. 참가를 원하는 단말기들을 현재 구성중인 계층 회의에 포함 시키고자 할 때, 제안한 알고리즘은 회의 내에서 컴퓨터 자원을 고려하여 참가한 단말기들을 가운데 연결 가능한 단말기들을 선택한다. 그 다음, 참가를 원하는 단말기들과 선택 단말기들 간의 거리를 계산하고 거리가 최소가 되는 단말기 쌍을 선택한 뒤, 이 단말기 쌍을 연결하여 계층 회의를 확장한다. 이러한 방법은 모든 단말기 들이 회의에 포함될 때까지 반복된다. 제안한 방법을 이용하여 모의실험 한 결과 비점진적 계층 회의 방법이 단말기 간의 평균 경로 거리 관점에서 점진적 계층회의 방법보다 24% 효율적으로 구성될 수 있음을 알 수 있다.

• 한국정보전자통신기술학회논문지
• /
• 제16권5호
• /
• pp.265-271
• /
• 2023

최근, 정보통신기술의 발달로 위치 정보 서비스가 점차 확대되고 있으며, 실내외 위치를 추출하기 위해 RSSI가 많이 활용되고 있다. RSSI를 이용한 실내외 위치추정법은 전파경로 및 간섭, 주변의 무선기기 장치 등의 영향을 받아 정확도가 떨어진다. 이러한 문제점을 개선하기 위해 전파 환경을 고려한 거리 추정법이 필요하다. 따라서 본 연구에서는 전파 환경을 고려하기 거리 추정 알고리즘을 제안한다. 제안된 방법은 확률적 특성을 가진 RBF 신경망과 전파 환경이 반영된 RSSI 입력과 출력을 학습하여 거리를 추정하도록 한 것이다. 제안된 방법의 성능을 평가하기 위해 BLE 비컨 송신기와 수신기를 이용하여 최대 55[m] 범위 내의 수신기의 위치를 추정하는 성능을 기존의 평균 필터, 칼만 필터 등과 비교평가 하였다. 그 결과 제안된 방법의 거리 추정정확도가 6.7배로 높은 결과를 보였다. 이 성능평가의 결과와 같이 본 연구의 방법을 위치 서비스에 적용한다면 더 정확한 위치추정이 가능할 것으로 사료된다.

• 한국콘텐츠학회논문지
• /
• 제12권2호
• /
• pp.105-115
• /
• 2012

본 논문에서는 휴대폰 카메라를 통해 간판영상의 한글문자를 인식한 후 오인식 된 결과를 교정하는 방법으로 인식 후보를 음소단위 분할하고 연산 가중치를 적용한 weighted Disassemble Levenshtein Distance(wDLD)를 제안한다. 제안된 방법은 인식된 문자열을 음소 단위로 분할한 후 입력 형태의 거리값을 산출하여, 가장 유사한 상호명을 데이터베이스에서 검출 한다. 제안된 방법의 효율성을 검증하기 위해, 전국의 상호명 중 중복되는 상호명을 제거한 130만개의 상호명을 이용하여 데이터베이스 사전을 구축하였다. 또한 대표적인 문자열 비교 알고리즘인 Levenshtein Distance와 음소를 분할하여 적용한 Disassemble Levenshtein Distance 방법, 그리고 본 논문에서 제안한 인식 후보의 음소 단위 분할 방법과 연산 가중치를 적용한 weighted Disassemble Levenshtein Distance의 교정율을 비교 분석 하였다. 그 결과 제안된 weighted Disassemble Levenshtein Distance(wDLD)은 Levenshtein Distance와 Disassemble Levenshtein Distance방법에 비해 각각 평균 29.85%와 6%의 인식률의 향상을 보였다.

• 한국발생생물학회지:발생과생식
• /
• 제17권4호
• /
• pp.363-367
• /
• 2013

PCR analysis generated on the genetic data showed that the geographic hairtail (Trichiurus lepturus) population from Korea in the Yellow Sea was more or less separated from geographic hairtail population from China in the South Sea. The average bandsharing value ($mean{\pm}SD$) within hairtail population from Korea showed $0.859{\pm}0.031$, whereas $0.752{\pm}0.039$ within population from China. Also, bandsharing values between two hairtail populations ranged from 0.470 to 0.611, with an average of $0.542{\pm}0.059$. As compared separately, the bandsharing values of individuals within hairtail population from Korea were comparatively higher than those of individuals within population from China. The hierarchical dendrogram resulted from reliable oligonucleotides primers, indicating two genetic clusters composed of cluster 1 (KOREANHAIR1~KOREANHAIR11) and cluster 2 (CHINESEHAI12~CHINESEHAI22). The genetic distances between two geographic populations ranged from 0.038 to 0.476. Individual No. 11 within hairtail population from Korea was genetically closely related with No. 10 (genetic distance=0.038). The longest genetic distance (0.476) displaying significant molecular difference was also between individual No. 01 within hairtail population from Korea and No. 22 from Chinese. In the present study, PCR analysis has revealed significant genetic distances between two hairtail population pairs (P<0.05).

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1139-1146
• /
• 2004

The effect of triangular tabs attached at the perimeter of jet nozzle on heat transfer enhancement was investigated experimentally. The modified flow structure was visualized using a smoke-wire method. Four different types of jet nozzle having 0, 4, 6 and 8 tabs were tested at jet Reynolds number Re=15,000 to investigate the effect of tabs on the variation of heat transfer rate. The local and average Nusselt numbers are increased with increasing the number of tabs. At nozzle-to-plate distance of L/D=4, the average Nusselt number was increased about 9.9% at Re=15,000 in the impingement region for the case of 8 tabs attachment. As the nozzle-to-plate distance increases, however, the heat transfer enhancement effect of triangular tabs is reduced. For the case of 4 tabs, the heat transfer enhancement is not so distinctive at L/D=8. As the protrusion depth of tabs into the jet flow increases, the heat transfer rate is also enhanced when the nozzle-to-plate distance is smaller than L/D=6.

• 한국농공학회지
• /
• 제15권3호
• /
• pp.3053-3058
• /
• 1973

1. This study was conducted to examine the effects of change of the short range nozzle hole on the travelling distance. The results of this study are summarized as follows; a) Effect of change of the cap hole diameter on the travelling distance of sprayed particles was generally a linear, the increasing rate was about 0.27. b) When the difference between the sectional area of cap hole and that of grooves of swirl plate, was small the travelling distance was decreased by the decreasing of spraying speed at cap hole. 2. This study was conducted to examine the effects of change of the short range nozzle hole on the size of spraying particles. The results of this study are summarized as follows; a) The diameter of sprayed particles on travelling distances in the short range nozzle did not coincide with the kinetic energy principle derived from the momentum and the resistance. b) The average diameter of sprayed particle between 1m and 3m in which amount of sprayed particle was particularly a great deal, was big, because that some of sprayed particles were absorbed each other on the way to fall c) Effect of increase of cap hole diameter was generally enlarged the average diameter of sprayed particle with small rate.

• Architectural research
• /
• 제22권2호
• /
• pp.53-61
• /
• 2020

The purpose of this study is to examine the influence of remoteness between exit stairways on evacuation performance. Firstly, we reviewed the design regulations of the U.S., the U.K., and South Korea, in relation to remoteness between Exit stairways. Secondly, evacuation simulation was implemented, in order to evaluate the adequacy of each standard. Eight tall buildings in South Korea were selected for the simulation. Evacuation performance was assessed for different remote distances between Exit stairways. Lastly, this research analyses the evacuation simulation data statistically in relation to the effect of remoteness on evacuation time. We found that as the distance between two exit stairways increases, the total evacuation time and average evacuation time for evacuees decreases. There was no statistical influence between the maximum travel distance of the evacuee and the remoteness between two exit stairways, but there was a significant effect on the average travel distance of the evacuees. In addition, the results from the optimal point showed that the L_ratio had the highest evacuation time at 0.44, while the D_ratio had the highest evacuation time at 0.38.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.22-26
• /
• 2008

The use of electrical discharge machining (EDM) for micro-machining applications requires particular attention to the machined surface roughness and discharge gap distance, as these factors affect the geometrical accuracy of micro-parts. Previous studies of conventional EDM have shown that selected types of semi-conductive and non-conductive powder suspended in the dielectric reduced the surface roughness while ensuring a limited increase in the gap distance. Based on this, an extension of the technique to micro-EDM was studied Such work is necessary since the introduction of nanopowders suspended in the dielectric is not well understood. The experimental results showed that a statistically significant reduction in the surface roughness value was achieved at particular concentrations of the powder additives, depending on the powder material and the machining input energy setting. The average reduction in surface roughness using a powder suspended dielectric was between 14-24% of the average surface roughness generated using a pure dielectric. Furthermore, when these additive concentrations were used for machining, no adverse increase in the gap distance was observed.