• 정보기술과데이타베이스저널
• /
• 제7권1호
• /
• pp.42-53
• /
• 2000

The major goal of this research is to develop an optimal route search algorithm for an intelligent route guidance system, one sub-area of ITS. ITS stands for intelligent Transportation System. ITS offers a fundamental solution to various issues concerning transportation and it will eventually help comfortable and swift moves of drivers by receiving and transmitting information on humans, roads and automobiles. Genetic algorithm, and fuzzy logic are utilized in order to implement the proposed algorithm. Using genetic algorithm, the proposed algorithm searches shortest routes in terms of travel time in consideration of stochastic traffic volume, diverse turn constraints, etc. Then using fuzzy logic, it selects driver-preference optimal route among the candidate routes searched by GA, taking into account various driver's preferences such as difficulty degree of driving and surrounding scenery of road, etc. In order to evaluate this algorithm, a virtual road-traffic network DB with various road attributes is simulated, where the suggested algorithm promptly produces the best route for a driver with reference to his or her preferences.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.459-466
• /
• 1996

A great amount of effort has been devoted to the constant improvement of such basic performance as dirvability, safety and enviromental protection. As a result, the total combination of various technologies has made it possible to produce safer and more comfortable automobiles. Among these technologies, plasma and thin film techniques are mainly cocerned with sensors, optics, electronics and surface modification. This paper first describes a concept of thin film processing in materials synthesis for sensors based on particle-surface interaction during deposition to provide a long life sensor applicable to sutomobiles. Some examples of parctical application of thin films to sensors are then given. These include(1) a thin films strain gauge for gravity sensors, (2) a giant magneto resistance film for speen sensors, and (3) a Magneto-impedance sensors fordetection of low magnetic field. Further progress of sophisticated thin film technology must be considered in detail to explore advanced thin film materials science and to ensure the field reliability of future sensor devices for automobile.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.193-194
• /
• 2006

With the onging trend of weight saving in automobiles, the application of light alloys is increasing. Recently, aluminum powder metallurgy has been the subject of renewed attention due to the combination of lightweight of aluminium and the efficient material utilisation of the powder metallurgical process, which offer attractive benefits to potential end-users. This study is to explore the use of warm compaction process to aluminium powder metallurgy. This paper presents a detailed study of the effect of warm compression and sintering conditions on the resultant microstructures and mechanical properties of Al-Cu-Mg-Si PM blend.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.77-81
• /
• 2009

Our nature is facing with serious problems related to the air pollution from automobiles in these days. Specially, the exhaust emissions from the diesel engine are recognized as a main cause influencing the environment severly. In this study, the potential possibility of biodiesel fuel is investigated as an alternative fuel for a naturally aspirated CRDi type diesel engine. The smoke emission of biodiesel fuel 5 vol-% was reduced by approximately 40% at 3000 rpm and full load in comparison with diesel fuel. On the other hand, the power, torque and brake specific energy consumption didn't show significant differences. NOx emission of biodiesel fuel was, however, increased compared with commercial diesel fuel.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.42-45
• /
• 2001

Switched Reluctance Motors(SRM) are a promising candidated automotive drives of the next generations. The successful commercialization of SRM drives in automobiles depends highly on the developments of SRM design and control techniques. This paper descrives the control issues of SRMs, ranging from drive system structure, rotor position sensing and torque control. Both simulation studies and test results are presented for a 160W SRM drive for automotive application.

• 자원리싸이클링
• /
• 제4권4호
• /
• pp.22-36
• /
• 1995

현대 문명의 상징인 자동차 수가 매년 증가함에 따라 여기에서 발생되는 폐타이어의 수도 증가하고 있다. 이 폐타이어는 환경, 미관상 나쁜 이미지 및 매립에 의한 국토 면적 점유등으로 문제점이 대두되고 있다. 그래서 이 페타이어를 재활용함으로서 자원의 소모를 줄임과 동신에 부가가치를 높일수 있는데, 이 페타이어들은 원형상태, 및 가공한 상태로 사용되기도 하고 에너지원으로 유용되고 있다. 본 연구에서는 페타이어를 재활용할 수 있는 방법들을 국내외적으로 조사하였다. 또 페타이어를 가공하여 사용하기 위한 전 처리로서 분말 분쇄기술에 대해 사례를 연구하였다.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.66-73
• /
• 2005

A great deal of exhaust gas inside a combustion room goes out through exhaust pipe. But residual gas 'Blowby gas' enters the crankcase through a small gap between the piston and the cylinder wall. Here, if the blowby gas isn't vented, this causes many bad efffcts such as lubricant oil contamination, corrosion by that and crankcase explosion by rising pressure. So most automobiles are constituted with a PCV(Positive Crankcase Ventilation) system to prevent previous problems. PCV valve is the most important part in this ventilation system. When companies are manufacturing new cases, engineers are designing it depending on their experiments than theoretical knowledges. Much efforts and times are needed for new development. This study will show quantitative results to increase the possibilities for the optimal design.

• 오토저널
• /
• 제8권1호
• /
• pp.52-61
• /
• 1986

An iterative viscous-potential flow procedure has been developed and used to predict aerodynamic characteristics of automobiles in ground proximity. The method is capable of predicting the effects of separated flows. The viscous-potential flow iteration procedure provides the connection between potential flow, boundary layer and wake modules. The separated wake is modeled in the potential flow analysis by thin sheets across which exists a jump in velocity potential. The ground effect is properly accounted for by placing a body image in the potential flow calculation. The agreement between theory and experiment is good and, thus, demonstrates that the method can be used in the preliminary design stage.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.42-47
• /
• 2009

Recently, the wide range of the composite materials is used for the making airplanes, trains and automobiles body for the lightweight. Despite having complex structures, composite materials usually have well defined mechanical characteristics. However, composite materials are difficult to understand the fracture mechanism clearly by simple mechanical test. Nondestructive evaluation (NDE) combined with mechanical testing can play a more important role and especially Acoustic Emission Testing (AET) would become known to be a useful tool to assess damage and fracture behavior of composites. In this study The experiment was performed to acquire the acoustic emission signal during tensile test using unidirectional CFRP specimen and the data was analyzed the acoustic emission parameters with the waveform.

• 대한산업공학회지
• /
• 제40권4호
• /
• pp.382-387
• /
• 2014

Image retrieval is a procedure to find images based on the resemblance between query image and all images. In retrieving images, the crucial step that arises is how to define the similarity between images. In this paper, we propose a new similarity measure which is based on distribution of color. We apply the new measure to retrieving two different types of images, wallpaper images and the logo of automobiles, and compare its performance to other existing similarity measures.