• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.635-642
• /
• 1998

In automobile exhaust system. Internal pressure pulsation and shell vibration greatly affect the surface sound radiation. This noise is emitted from the muffler outer shell due to the pulsation of the exhaust gas pressure. This paper describes an analytical study of these characteristics as influenced by exhaust system structure. An exhaust simulator was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was identified by finding FRF.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.108-113
• /
• 1995

Wear and friction behavior of plasma-sprayed coatings in Mo- and Co-based alloy were studied for the application of piston-ring automobile engine. The plasma-sprayed coatings were varied with gun current density, gas flow, and distance. The surface roughness, microhardness, and wear volume were measured depending on the spray distances. The high temperature hardness value were also measured as a function of temperature. Ball-on-disc geometry configuration tribometer was utilized in air. The wear tests were performed in the temperature ranges from room temperature to 825$^{\circ}$C to investigate the tribological trend of the piston-ring materials in the lack of lubricant. The cross sections of wear track were investigated, using microscopy.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.109-117
• /
• 1992

Mixing of ceramic-binder system was investigated experimentally and theoretically for application to Ceramic Injection Molding. Polypropylene, stearic acid, and paraffin wax were selected as the binder system, and silicon nitride fine powders were selected as the ceramic material. Single screw ectruder was employed as the mixing equipment. Theoretical analysis was performed to investigate the mixedness of mixture quantitatively. The analysis predicted average residence time average total strain, and average shear stress as a function of screw speed for mixtures of different volume fraction. Qualitative mixedness of mixture and characteristics of mixing were investigated by using SEM and EPMA. In addition, rheological properties of the mixture were investigated by using a capillary rheometer to examine possibility of injection molding.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.40-49
• /
• 1996

With the advance of the standard of living, the demand on automobile goes beyond the simple transportion equipment, therefore the interior noise reduction has been the important factor for improvement of the ride quality. Idling noise is a major vehicle characteristic determining occupant comfort. In the present research two approaches for noise source identification based on theory for multi-input system have been investigated. The concept of the frequency response function and the multi-dimensional spectral analysis were used to estimated the spectra of the noise source.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.111-118
• /
• 2003

Recently, environmental damage to urban area becomes serious problem due to the exhaust emissions by increasing the number of vehicle. Especially, exhaust emission from diesel vehicles are blown to be harmful to human health and environment. Photoacoustic Spectroscopy system is very useful technology for simultaneous and continuous measurement of the various components of the automotive exhaust gas. In this study, in order to reduce emission gases from automobile, we tried to develop the measurement system of Photoacoustic Spectroscopy. To improve performance of high sensitive Photoacoustic Spectroscopy system for automotive exhaust emissions, the shape of Photoacoustic Spectroscopy cell was optimized to use the flow analysis. And Exhaust emission data of the 1,500cc gasoline engine was fixed the working fluid. The characteristics of fluid flow for cell were analyzed by various conditions in detail.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.30-41
• /
• 1995

Gear rattle is a source of vibration and noise in automotive gearbox casing and generally occurs at or near system resonant frequencies. The neutral gear rattle of the gearbox. is affected by the stiffness and hysteresis torque in the clutch disk and drag torque determining balancing point of the clutch disk operating range. The experiment is carried out in the pre-damper type clutch and a manual transmission of a automobile equipped for inline four-sylinder four-cycle 1.5L MPI engine and the computer simulation is executed by 5th order Runge-Kutta method. The results of the simulation analysis and experimental studies show the dynamic behavior of clutch and a phenomenon of the neutral gear rattle with respect to drag torque and torsional characteristics of the clutch.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.53-62
• /
• 1996

Recently, ceramic / metal bonded joints have led to inccreasing use of structural materials such as automobile, heat engine in various industries. In this paper, a method to analyze an interface crack under both residual stresses and applied loading was proposed. and some results of boundary element method(BEM) analysis Were presented, Fracture thoughness tests of ceramic/metals bonded joints with an interface crack Were carried out, and the stress intensity factors of these joints Ware analyzed by BEM. Also crack propagtion direction was simulated numerically by using BEM. Crack propagation angle was able to easily determine based on the maximum stress concept. The prediction of fracture strength by the fracture thoughness of the ceramics/metals bonded joints was proposed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.65-69
• /
• 2012

According to the developments of automobile industry, a technology has been studied in a point of view of environment, which is to increase fuel consumption rate. Especially it is well known that a weight reduction is one of the main technologies to increase the fuel consumption rate and, also to decrease the cost of manufacturing. This paper presents the method for reducing weight of bracket, which connects air conditioner compressor to engine, based on dynamic stress analysis and engineer's intuition for optimal design.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.156-160
• /
• 2018

In the paper, a kind of self-tuning PID control system is designed to keep the honing coolant temperature constant in the process of automobile engine production. The conventional PID control method and the Fuzzy PID control method both are used to design and make the simulation experiment in Matlab. According to the simulation result, the performance of Fuzzy PID control method is obviously better. The Fuzzy PID control system can react faster to get the target temperature and resume normal when external conditions exchanged.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.443-450
• /
• 2023

One of the basic tasks in the automobile manufacturing process is to design a bare chassis, which is the basic frame of a vehicle, and a bracket is a member connecting various devices to the frame. Bracket, which is a member connecting the engine, transmission, and suspension, which are the core devices of driving and operating the vehicle, to the frame, must maintain safety during vehicle operation. If the bracket connecting the various devices constituting the vehicle to the frame does not have durability, serious accidents may occur during operation of the vehicle. In this study, we performed stress analysis on the brackets installed in the bare chassis of the 25-passenger bus in the development stage. Based on the stress analysis performed, an improved bracket dimension was proposed.