• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.663-670
• /
• 2009

Two-phase flow boiling heat transfer of R-410A in horizontal small tubes was reported in the present experimental study. The local heat transfer coefficients were obtained over a heat flux range of 5 to 40 kW/$m^2$ a mass flux range of 170 to 600 kg/$m^2s$, a saturation temperature range of 3 to $10^{\circ}C$, and quality up to 1.0. The test section was made of stainless steel tubes with inner diameters of 0.5 and 3.0 mm, and lengths of 330 and 3000 mm, respectively. The test section was heated uniformly by applying a direct electric current to the tubes. The effects on heat transfer of mass flux, heat flux, inner tube diameter, and saturation temperature were presented. The experimental heat transfer coefficients are compared with six existing heat transfer coefficient correlations. A new boiling heat transfer coefficients correlation based on the superposition model for R-410A in small tubes was developed with mean deviation of 10.13%.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.138-144
• /
• 2018

Inventory inspection is an important task to eliminate the inconsistency between real assets and inventory management systems, and it is performed periodically at the site. In the case of a large-sized property, it is mainly managed in an outdoor workshop or a warehouse. However, due to the large area of the outdoor area, it is relatively difficult to identify the quantity and location of the property and is also vulnerable to theft. To solve this problem, we proposed a method and system for performing a warehouse inventory inspection using an unmanned aerial vehicle (UAV) and Bluetooth low energy (BLE) beacons. The proposed method has the following advantages. First of all, if we carry out inventory inspection by utilizing UAV, we can minimize user's effort compared to existing methods. The method of recognizing the asset by attaching the BLE beacon is more costly than using the existing RFID technology, but it is advantageous because the recognition distance is increased and the battery life of the tag is drastically increased. We also designed a BLE beacon reader for the system and implemented a prototype to show the feasibility of the proposed system. The prototype is based on Genuino 101, which is a kind of arduino, and adds HM-10 and Neo-6m modules to provide Bluetooth and GPS functions. The BLE beacon reader was tested in outdoor, and attached in drone. We also developed an inventory checking system based on the web to display results of inventory checking. The proposed approach enables the users to automate the operation of inventory checking on an outdoor warehouse.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.385-390
• /
• 2017

Owing to the development of IT technology, a computerized system in various ways such as a variety of company's businesses, factory automation system and hospital healthcare system is introduced and operated. And it is possible to say that a computer system is more important than anything else to the extent that all businesses are suspended in case the system is down. Attention should be always paid to environmental management such as temperature, humidity and fire in server room for the normal operation of system in this situation. It is thought that there is necessity for a low-cost system which independently monitors environment round the clock in the situation where the person in charge doesn't pay attention and which informs a person in charge in real time when an event occurs for the operation of this small server room. Consequently, it is to be hoped that the suspension of service provided by computer system, which may occur due to a specific event, can be prevented.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.6
• /
• pp.472-479
• /
• 2002

Since $Br^{\circ}anemark$ introduced the osseointegrated implants, they have been granted for useful methods for the restoration of oral function. The original $Br^{\circ}anemark$ protocol recommended long stress-free healing periods to achieve the osseointegration of dental implants. However, many clinical and experimental studies have shown that the osseointegration is no wonder in almost cases and that early and immediate loading may lead to predictable osseointegration. So we are willing to introduce the Satellite Abutment newly invented for immediate loading. We think that it will make the occlusal forces dispersed to surrounding bone and that we can restore the oral function immediately after implant installation not disturbing osseointegration. In case of using Satellite abutment, stress concentrated to bone contact area of implant was distributed not only fixation plate and screws but also superior, middle portion of implant and cortical layer of jaw bone. It was clearly decreased on the bone contact surfaces around dental implants. 1. Stress was decreased more than 76.5% when satellite straight abutment was used. 2. Stress was decreased more than 50% when satellite angled abutment was used. 3. The stress around dental implant was well distributed along the cortical bone surface and the fixation plate and screw. This study concludes that satellite abutment can be used as all immediate loading implant prothesis because it was possible to distribute periimplant occlusal stress through implant contact bone surface and cortical layer of jaw bone.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.117-129
• /
• 2009

This paper studied the safety management network system of infrastructure which constructed smart sensors, closed-circuit television(CCTV) and monitoring system. This safety management of infrastructure applied to bridge, cut slop and tunnel, embankment etc. The system applied to technologies of standardization guidelines, data acquirement technologies, data analysis and judgment technologies, system integration setup technology, and IT technologies. It was constructed safety management network system of various infrastructure to improve efficient management and operation for many infrastructure. Integrated safety management network system of infrastructure consisted of the real-time structural health monitoring system of each infrastructure, integrated control center, measured data transmission using i of tet web-based, collecting data using sf ver, early alarm system which the dangerous event of infrastructure occurred. Integrated control center consisted of conference room, control room to manage and analysis the data, server room to present the measured data and to collect the raw data. Early alarm system proposed realization of warning and response within 5 minute or less through development of sensor-based progress report and propagation automation system using the media such as MMS, VMS, EMS, FMS, SMS and web services of report and propagation. Based on this, the most effective u-Infrastructure Safety Management System is expected to be stably established at a less cost, thus making people's life more comfortable. Information obtained from such systems could be useful for maintenance or structural safety evaluation of existing structures, rapid evaluation of conditions of damaged structures after an earthquake, estimation of residual life of structures, repair and retrofitting of structures, maintenance, management or rehabilitation of historical structures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.97-100
• /
• 2001

For the auto-configuration of diverse hosts and automation of network management as many electronic machines and industrial components are becoming connected to Internet, it is possible to use autoconfiguration using DHCP and network management protocol such as SNMP, CMIP. But these technologies are not developed maturely and lack various standardizations yet because these are designed for restrictive purposes in the past. The new working group "Zeroconf" is made in IETF at March, 2000, it is aimed for making standards of autoconfiguration which is applied to impromptu ad-hoc networks in automobiles, trains, planes and home network or mobile networks. In this paper, we introduce the IPv6 based autoconfiguration technologies such as IP interface configuration, translation between host name and IP address, IP multicast address allocation and service discovery. Finally, trends of standardization in Zeroconf working group will be shown. be shown.

• IE interfaces
• /
• v.25 no.2
• /
• pp.204-215
• /
• 2012

Recently, more and more firms are considering the adoption of RFID technology because it is expected to make process automation easier and has many different application areas. A review of existing studies about RFID adoption methodology shows that the most of the proposed methodologies are mainly based on economic evaluations. However, in the near future when the adoption and diffusion of RFID become major forces among business firms, it would surely have some limits to decide its adoption solely on the basis of economic considerations. In order for all the important strategic objectives to be considered during the major decision processes, it is necessary to make explicit what the decision makers really want to achieve from the RFID system. In this paper, we propose a general value model of RFID system which can provide an overall vision of all values RFID adoption may offer and a way to search and evaluate alternatives on the basis of these values. Especially, this model contains not only opportunities but also risks of RFID adoption so that a balanced consideration can be made. The model building process was essentially based on the 'value-focused thinking' approach proposed by R. Keeney. The proposed model is expected to provide insights about what to do in the process of introduction in order to maximize the potential benefits and minimize the negative risks. Referring to this value model, the important decisions would have greater chance to be based on a balanced consideration of opportunities and risks.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.553-560
• /
• 2008

The amount of image data used in medical institution is increasing rapidly with great development of medical technology. Therefore, an automation method that use image processing description, rather than manual macrography of doctors, is required for the analysis large medical data. Specially, medical image registration, which is the process of finding the spatial transform that maps points from one image to the corresponding points in another image, and 3D analysis and visualization skills for a series of 2D images are essential technologies. However, a high establishment cost raise a budget problem, and hence small scaled hospitals hesitate importing these medical visualizing system. In this paper, we propose a visualization system which allows user to manage datasets and manipulates medical images registration using an open source graphics tool - VTK(Visualization Tool Kit). The propose of our research is to get more accurate 3D diagnosis system in less expensive price, compared to existing systems.

• Convergence Security Journal
• /
• v.13 no.1
• /
• pp.25-30
• /
• 2013

In this paper, the key performance index for advanced logistics is analyzed, and the specific requirements for the material flow IT services are proposed to improve the world competitiveness of the material flow industries and to implement the advanced logistics in Korea by survey research. The key performance index is classified into three types of efficiency, sustainability and economics, and two classes of enterprise and public for IT services are proposed. In addition to, for case studies, the survey analysis for the Pyeongtaek Port is performed to diagnose the material flow enterprise and to analyze the priorities of the IT services for Port's employee, trade enterprise, public service personnel, and local resident. From the results, to improve the productivity and efficiency of the enterprise, the secure the professional man-power and standardization are needed, and the automation, u-Port, green technology and material flow security for the IT services are required.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.721-733
• /
• 2020

Recently, there is an increasing demand for ultra-low-latency (ULL) services such as factory automation, autonomous driving, and telesurgery that must meet an end-to-end latency of less than 10 ms. Fifth-generation (5G) New Radio guarantees 0.5 ms one-way latency, so the feasibility of ULL services is higher than in previous mobile communications. However, this feasibility ensures performance at the radio access network level and requires an innovative 5G network architecture for end-to-end ULL across the entire 5G system. Hence, we survey in detailed two the 3rd Generation Partnership Party (3GPP) standardization activities to ensure low latency at network level. 3GPP standardizes mobile edge computing (MEC), a low-latency solution at the edge network, in Release 15/16 and is standardizing time-sensitive communication in Release 16/17 for interworking 5G systems and IEEE 802.1 time-sensitive networking (TSN), a next-generation industry technology for ensuring low/deterministic latency. We developed a 5G system based on 3GPP Release 15 to support MEC with a potential sub-10 ms end-to-end latency in the edge network. In the near future, to provide ULL services in the external network of a 5G system, we suggest a 5G-IEEE TSN interworking system based on 3GPP Release 16/17 that meets an end-to-end latency of 2 ms.