• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.107-108
• /
• 2019

제4차 산업혁명에 따라 시작된 패러다임의 변화는 해운, 항만, 조선 및 해양 등 전 산업분야에 걸쳐 진행되고 있으며, 이와 함께 자율운항선박은 혁신성장 기술에 대한 새로운 도전과제로 주목받고 있다. 자율운항 선박에 대한 국제적 차원의 논의는 2017년 제98차 국제해사기구 해사안전위원회에서 자율운항선박을 MASS(Maritime Autonomous Surface Ship)로 규정함으써 본격화 되었으며, 국내에서도 '해양수산부 2018년 업무계획'에 따라 국가물류체계 혁신을 위하여 자율운항선박, 해상통신망, 스마트항만 등 스마트 해상물류체계 구축 전략을 수립하였다. 자율운항선박을 운영하기 위해서는 안전한 입출항을 돕는 스마트항만의 구축이 필수적인데, 효율적인 항만운영과 안전을 확보하기 위하여 안전성, 신뢰성, 효율성 중심의 인프라로 구축되어야 할 것이다. 현재의 도선서비스는 개별 도선사가 각각의 입출항하는 선박에 직접 탑승하여 제공되고 있으나, 향후 자율운항선박에는 이와 같은 형태의 서비스를 제공하기 어려울 것으로 판단된다. 이는 도선서비스의 자동화 및 지능화, 원격 통제 체계의 마련이 필요한 것으로 볼 수 있다. 본 논문에서는 스마트항만 운영을 위하여 현재의 구축 운영중인 항로표지의 인공지능화를 통하여 전자도선서비스(Electric Pilotage Service)를 수행할 수 있는 방안과 체계, 서비스 대상에 대하여 제시하며, 부산항 북항을 대상으로 해당서비스에 대한 구체화 방안을 제시한다.

• Journal of Ship and Ocean Technology
• /
• 제6권4호
• /
• pp.1-12
• /
• 2002

A control system for an automated line heating process is developed by use of object-oriented methodology. The main function of the control system is to provide real-time heating information to technicians or automated machines. The information includes heating location, torch speed, heating order, and others. The system development is achieved by following the five steps in the object-oriented procedure. First, requirements are specified and corresponding objects are determined. Then, the analysis, design, and implementation of the proposed system are sequentially carried out. The system consists of six subsystems, or modules. These are (1) the inference module with an artificial neural network algorithm, (2) the analysis module with the Finite Element Method and kinematics analysis, (3) the data access module to store and retrieve the forming information, (4) the communication module, (5) the display module, and (6) the measurement module. The system is useful, irrespective of the heating sources, i.e. flame/gas, laser, or high frequency induction heating. A newly developed automated line heating machine is connected to the proposed system. Experiments and discussions follow.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.321-327
• /
• 2010

본 논문에서는 CANopen 프로토콜을 이용하여 전동 구동기 제어시스템을 설계하고 개발하는데 관련된 논문이다. 이 논문에서는 네트워크의 물리계층(1계층) 및 데이터 링크(2계층)은 CAN네트워크 프로토콜을 이용하였으며, 그 위의 상위 프로토콜은 CANopen 프로토콜을 이용하였다. 전동밸브 제어기는 PIC 마이크로프로세서를 이용하여 구현하였으며, 제어시스템 사용자를 위한 서버 응용프로그램은 C#언어로 작성하였다. 실시간 실험을 통하여 본 논문에서 구현된 전동밸브 제어 시스템을 평가하여 설계된 바와 같이 동작하였다.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.45-54
• /
• 2007

In the context of auto-landing containers from a container ship to a truck or automatic guided vehicle and vice versa, this research investigates three schemes, one in Part I and two in Part II, for measuring the absolute position of a container. Coordinate transformations between the reference-coordinate, sensor-coordinate, and body-coordinate systems are briefly discussed. The scheme explored in Part I aims the use of three laser-slit sensors, which are relatively inexpensive. In this case, nine nonlinear equations are formulated for six unknown variables (three for orientation and three for position), so a closed-form solution is not available. Instead, an approximate solution through linearization was derived. An advantage of the method in Part I is its ability to measure an absolute position in 3D space, while a disadvantage is the computation time required to obtain pseudo-inverses and the approximate nature of the obtained solution. Numerical examples are provided.

• 한국항해항만학회지
• /
• 제29권3호
• /
• pp.291-298
• /
• 2005

본 기술논문에서 18,000 TEU급 초대형 선박에 대응하는 차세대 컨테이너크레인의 규격 및 성능을 검토하였다. 컨테이너선의 발달 과정을 연대순으로 살핀 후에 기존에 설치되어 운영중인 컨테이너크레인의 특성을 파악하였고 세계각처에서 수행되고 있는 컨테이너크레인에 관한 연구동향을 분석하였다. 분석한 결과를 토대로 2014년 이후에 등장할 차세대 컨테이너크레인의 규모 및 성능을 예측하였다. 검토된 사항은 컨테이너크레인의 구조, 트롤리와 호이스트의 메커니즘, 제어방식, 아웃리치, 백리치, 레일게이지, 하역능력, 안정성 및 내구성 등이다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.425-429
• /
• 2002

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCA W process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.95-99
• /
• 2008

The block assembly of ship consists of a certain type of heat processes such as cutting, bending welding residual stress relaxation and fairing. The residual deformation due to welding is inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding deformation. The validity of the prediction method must be also clarified through experiments. This paper proposes a simplified analysis method to predict the welding deformation of panel block structure. For this purpose, a simple prediction model for fillet welding deformations has been derived based on numerical and experimental results through the regression analysis. On the basis of these results, the simplified analysis method has been applied to some examples to show its validity.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.41-54
• /
• 1996

Sculptured surface structures such as ship hulls are traditionally formed up to the required double curved shape by line heating method. The nature of the line heating process is a transient thermal process, followed by a thermo-elastic-plastic stress field. The permanant shape is dependent on many factors involved in the process, Among them are torch speed and path, supplied heat type and amount , and plate size. Thus, the work is essentially leaded by experts with lots of experiences. However, in order to effectively improve productivity through automation, each factor should be clearly examined how much it affects the final shape. This can not be done only by experiments, but can be achieved by a mechanics-based approach. In this paper, we propose a conceptual configuration for plate forming system, and then present simulations of the line heating process with numerical data in practices and suggest a computerized process of the line heating for practical applications. The modeling of heating torch, water cooling, and the plate to be formed is proposed for the finite element analysis after the mechanics of line heating is studied. Parametric studies are given and discussed for the effects of plate thickness, torch speed and initial curvature in forming a saddle typed surface.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.468-477
• /
• 2013

An automatic pipe routing system is proposed and implemented. Generally, the pipe routing design as a part of the shipbuilding process requires a considerable number of man hours due to the complexity which comes from physical and operational constraints and the crucial influence on outfitting construction productivity. Therefore, the automation of pipe routing design operations and processes has always been one of the most important goals for improvements in shipbuilding design. The proposed system is applied to a pipe routing design in the engine room space of a commercial ship. The effectiveness of this system is verified as a reasonable form of support for pipe routing design jobs. The automatic routing result of this system can serve as a good basis model in the initial stages of pipe routing design, allowing the designer to reduce their design lead time significantly. As a result, the design productivity overall can be improved with this automatic pipe routing system.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.106-113
• /
• 2004

The block assembly of ship consists of a certain type of heat processes such as cutting, bending, welding, residual stress relaxation and fairing. The residual deformation due to welding is inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding deformation. Systematic and quantitative theoretical works to clarify the effects of various factors on the welding deformation have rarely been found. Therefore, in this paper, the effects of various factors, such as welding process and gravity on the butt welding deformation have been investigated through a number of numerical analyses. In addition, this paper proposes a simplified analysis method to predict the butt welding deformation in actual plate structure. For this purpose, a simple prediction model for butt welding deformations has been derived based on numerical and experimental results through the regression analysis. Based on these results, the simplified analysis method has been applied to some examples to show its validity.