• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.972-974
• /
• 1993

This paper presents a new method to automatically design fuzzy logic controller(FLC). The main problems of designing FLC are how to optimally and automatically select the control rules and the parameters of membership function (MF). Cell state space algorithms (CSS), differential competitive learning (DCL) and multialyer neural network are combined in this paper to solve the problems. When the dynamical model of a control process is known. CSS can be used to generate a group of optimal input output pairs(X, Y) used by a controller. The(X, Y) then can be used to determine the FLC rules by DCL and to determine the optimal parameters of MF by DCL and to determine the optimal parameters of MF by multilayer neural network trained by BP algorithm.

• Journal of the Korean Society for Library and Information Science
• /
• v.35 no.4
• /
• pp.141-160
• /
• 2001

This study is to develop a new system for conducting the information retrieval automatically. The system in this study is programmed by Delphi 4.0(PASCAL) and consists of automatic indexing, clustering technique, establishing and expressing term hierarchic relation, and automatic information retrieval technique. Thus this browser system can automatically control all the processes of information searching such as representation, generation and extension of queries and construction of searching strategy and feedback searching.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.89-91
• /
• 2007

In this paper, we developed DSP based control system to automatically open and close passive filter, which is used to reduce harmonics, according to operating condition of loads. Passive filter control system automatically open and close each branch of filter according to working conditions of loads by sending signals to open and close installation of passive filter after measuring and monitoring voltage, current, harmonics, reactive power, power factor and so on. We verified it's performance by connecting control system with passive filter in the power line using the 100[HP] d.c. motor drive, opening and closing passive filter according to operation condition of motor, and measuring harmonics and reactive power, etc.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2618-2629
• /
• 1999

In this paper, we describe the design and implementation of the FDRA(Fault Detection Recovery based on Agent) running on distributed multimedia environment. DOORAE is a good example for distributed multimedia and multimedia distance education system among students and teachers during lecture. It has primitive service agents. Service functions are implemented with objected oriented concept. FDRA is a multi-agent system. It has been environment, intelligent agents interact with each other, either collaboratively or non-collaboratively, to achieve their goals. The main idea is to detect an error by using polling method. This system detects an error by polling periodically the process with relation to session. And, it is to classify the type of error s automatically by using learning rules. The merit of this system is to use the same method to recovery it as it creates a session. FDRA is a system that is able to detect an error, to classify an error type, and to recover automatically a software error based on distributed multimedia environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.7-16
• /
• 2002

En this paper, we propose the algorithm that has analyzed the map Information automatically to extract the contour lines and numbers, symbols from the map image. After converting the input image to binary one, thinned image is obtained by thinning algorithm. The contour elements in the thinned image are classified and the classified elements are analyzed to automatically classify the numbers from symbols. Finally, the broken parts are restored by reconstruction algorithm. The performance of proposed algorithm is verified through the simulation. The proposed one has good performance.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3156-3158
• /
• 1999

Occupancy sensor is a efficient light control system which light on/off automatically and reduces the unnecessary power waste. From now the research on occupancy sensor is restricted to the selection of the appropriate place or sensor. Exist occupancy sensor changes the delay time by manually to the place or situation, so it is unreliable. The delay time can been changed by the average time of the occupied and the preset time, but it is not enough to reliable. In this paper, so to acquire the reliance the average and the standard deviation of the occupied time change the delay time automatically and protect the malfunction from the detector. And to embody it, AT89C52 microcontroller is adopted to the control circuit. It is verified by simulation and experiment results of output characteristic for randomized input.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.255-260
• /
• 2002

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-coded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete finite element(FE) model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performances of the present system, semi-elliptical surface cracks in a inhomogeneous plate subjected to uniform tension are solved.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.151-158
• /
• 1999

This paper describes TVML (TV program Making Language) for automatically generating television programs from text-based script. This language describes the contents of a television program using expression with a high level of abstraction like“title #1”and“zoom-in”. The software used to read a script written in TVML and to automatically generate the program video and audio is called the TVML Player. The paper begins by describing TVML language specifications and the TVML Player. It then describes the“external control mode”of the TVML Player that can be used for applying TVML to interactive applications. Finally, it describes the TVML Editor, a user interface that we developed which enables users having no specialized knowledge of computer languages to make TVML scripts. In addition to its role as a television-program production tool. TVML is expected to have a wide range of applications in the network and multimedia fields.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.2
• /
• pp.127-135
• /
• 2002

Due to the fact that the design of a reinforced concrete structure changes in accordance with its shape and assigned load, total automation of the design system has not been achieved. For instance, since there is no general rule about setting up reinforcing steel quantity and arrangement location, it is simply not feasible to automatically decide the reinforcing arrangement location. In this study, the ESO(evolutionary structural optimization) technique and its related issues will be discussed. The ESO techniques is determined the reasonable load path which is traveling of load between in-flow and out-flow at a concrete structure using numerical analysis. And the results applied to the steel arrangement in reinforced concrete structures. The optimal algorithm, which determines the terminal criteria during ESO process, has been updated by using the obtained results. And the load path within the member has been determined automatically.

• IE interfaces
• /
• v.13 no.2
• /
• pp.157-165
• /
• 2000

In this paper, an efficient method is proposed to place the cooling lines(CLS) and ejector pins(EPS) of mold design. The other components of mold, except CLS and EPS, can be generated automatically by batch processing. But the placements and sizes of CLS and EPS depend on the shapes of a part, so that the design works of CLS and EPS should be processed interactively. Using the pre-defined reference points, the positions of CLS and EPS can be determined interactively. By the proposed method, the interference occurred during placing CLS and EPS can be avoided, and the proper lengths of them can be calculated automatically. The information of the positions and lengths are stored in BOM database for generating a machining data. The proposed method is implemented with Unigraphics API functions and C language, tested on Unigraphics V15.