• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2015

This study presents analysis of the experimental data meeting conditions of several applications in real time. The results of this experimental study are as follows: Respectively in cooling and heating performance, a refrigerant charge tank can take automatic control of variation of the refrigerant quantity by controling pressure and temperature of system and outlet water temperature. The COP shows 3.5 in cooling operation and 3.2 in heating operation. The refrigerant quantity increases 0.69 kJ/h. When the outdoor temperature decreases $1^{\circ}C$, Therefore if the temperature become lower from $25^{\circ}C$ to $-16^{\circ}C$, the refrigerant quantity increases about 9.5%. Compared to the normal state experiment results, the COP in automatic control of the refrigerant quantity rises roughly 10%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2017

Recently, several researches have been studied on agricultural automation system according to convergence of IT technology with agriculture. An automatic control system of the growth environment in crops is one of the these researches. The controls of damages caused by diseases and insects pest in crops are mainly carried out by manual mode or semi-automatic mode because of farmer's concerns for poor efficiency. But, this situation needs to be improved because it occurs various problems, such as human exposure to toxic pesticides, environmental pollution and waste due to drug overuse. In order to solve these problems, we developed an automatic quantity control system which based on the amount of pesticides for area under cultivation. The amount of pesticides is calculated according to the manufacturer's instruction for pesticides. To verify the effectiveness of our developed automatic system, we also compared with the systems of manual mode and the semi-automatic mode. The experimental results of a pest control performance of an automatic quantity control system showed that automatic system can reduce overuse of drugs. These results suggested that it can be expected to replace the existing system, with equivalent effectiveness to the manual mode.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.847-852
• /
• 2003

The purpose of this paper is to develop the new deep mixing method installed automatic control equipments for the better construction in deep mixing and grouting. Civil, geotechnical, electronic, and communication experts have worked together for a long time for the development of automatic measuring devices using wire and wireless transmitting-receiving set. A series of laboratory and field experiments were carried out to check the reliability and field applicability of this system. New total automatic control system including automatic devices for checking angle, depth and quantity of injected grout was invented from the result of this research.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.111-114
• /
• 1996

Hydroponics is to grow plants, not in soil but in water which the quantity of necessary chemical food can be controlled. In this paper, this is designed in the automatic system. The closed culture reduces cost of production and produces a many kinds of agricultural products in a confined place. An adaptive fuzzy control in the best method to solve and to overcome parametric uncertainties and non-linearity of the controlled system. A hydroponics automation system which is able to overcome these control problems. It is used in implementation of the hydroponics automation system. The performance is analyzed through an experiment in which the new adaptive fuzzy control method is applied to the automatic control of tomato hydroponics.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.59-62
• /
• 2000

In cope with insufficient agricultural labor and requirement of high quality product Hydroponics is a really good method. It makes the high density agriculture possible and all the growing environments controllable. So its research is so much progressing to maximize the quantity and quality of farm products. Furthermore, the big progress, in the research of a future agriculture, is systematically conducted for the automatic controlled system. In this paper, a new approach to the automation of the cultivation in a green house is suggested and a practical automatic control cultivation system is implemented. To automatically control and optimize the very nonlinear and time-varying growth of farm products, a hybrid strategy(FECA; Fuzzy Expertized Control Algorithm) is proposed which serially combines a fuzzy expert system with the fuzzy logic control. The fuzzy expert system(FMES; Fuzzy Model-based Expert System) is intended to overcome the non-linearity of the growth of farm products. The part of fuzzy controller is incorporated to solve the time-variance of the growth of farm products. Finally, the efficiency and the effectiveness of the implemented agricultural automation system is presented through the cultiviation results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.3
• /
• pp.175-180
• /
• 2008

Flow quantity to supply to a coil in floor heating system is important to achieve comfortable indoor air condition in the winter season. The hot water header is used to distribute the water into the coil. Experimental study has been performed using the water header that have 5 branches consisted of flow control valves and automatic shut-off valves. Each branch line connected it with X-L pipe. Experimental tests accomplished it to investigate the flow distribution characteristics of the hot water header. Experimental results show that the selection of the pump head and differential pressure are very important to save running energy of the system, and high differential pressure needs more friction loss in the case of suitable differential pressure for balancing of the header.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.245-251
• /
• 2011

Quantities of data in the DMS (Distribution management system) or SCADA (Supervisory control and data acquisition) system is enormously large as illustrated by the usage of term flooding of data. This enormous quantity of data is transmitted to the status data or event data of the on-site apparatus in real-time. In addition, if GIS (Geographic information system) and AMR (Automatic meter reading), etc are integrated, the quantity of data to be processed in real-time increases unimaginably. Increase in the quantity of data due to addition of system or increase in the on-site facilities cannot be handled through the currently used Single Thread format of data processing technology. However, if Multi Thread technology that utilizes LF-POOL (Leader Follower -POOL) is applied in processing large quantity of data, large quantity of data can be processed in short period of time and the load on the server can be minimized. In this Study, the actual materialization and functions of LF POOL technology are examined.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.77-82
• /
• 2010

These days our coasts have been damaged by the polluted water resulting from the construction of industry on the shore, increasing population and urbanization. The destruction of ecosystem has induced many problems to aquaculture such that it raises the production cost of aquatic products for eating. For solving these problems aquafarm has been moving to the land. This paper intends to describe the automatic feeding system for the inland fish farm. An existent automatic feeding system has problems such that feed quantity is not accurate and feed itself is broken by feed motor. But a proposed system in this paper is more accurate than the existent system in view of feed quantity by using the combination of valve and load-sell. Resultantly, the system can safely transfer feed to inland nursery tank. Through several experiments using a real system, the effectiveness of the proposed system is verified under all conditions.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2992-2994
• /
• 2000

In cope with insufficient agricultural labor and requirement of high quality product Hydroponics is a really good method. It makes the high density agriculture possible and all the growing environments controllable. So its research is so much progressing to maximize the quantity and quality of farm products. Furthermore, the big progress, in the research of a future agriculture. is systematically conducted for the automatic controlled system. In this paper, a practical automatic control cultivation system is implemented. To automatically control and optimize the very nonlinear and time-varying growth of farm products, a hybrid strategy(FECA: Fuzzy Expertized Control Algorithm) is proposed which serially combines a fuzzy expert system with the fuzzy logic control. The fuzzy expert system (FMES: Fuzzy Model-based Expert System) is intended to overcome the non-linearity of the growth of farm products. The part of fuzzy controller is incorporated to solve the time-variance of the growth of farm products. Finally. the efficiency and the effectiveness of the implemented agricultural automation system is presented through the cultivation results.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.97-109
• /
• 2015

In this paper, we design and implement a two-way automatic communication system using a mobile instant messenger that can provide a customized service through a real-time two-way communication using a mobile instant messaging service. Two-way automatic communication system using a mobile instant messenger can improve the quality and quantity of information in real-time update of the information through the feedback. In addition, since it is communicated by using a mobile Instant Messanger in 1:1 there is no concerns that is recognized as spam, as well as it is possible to provide customized information for each user. Two-way automatic communication system using a mobile instant messanger shows the difference of the speed according to the data input time in typing by hands in result of comparing the time to input a date and the processing speed to search a data. Therefore in category treatment, command processing and natural language processing, Category treatment way is the most excellent in aspect of data processing speed, otherwise in aspect of the total speed to combine the data input time and the processing time, the command processing way is the best method.