• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.29-37
• /
• 2003

An approach is described for automatic measuring of GCP's image coordinates from SPOT imagery and focused on the fulfillment an automatic orientation of satellite images. For the orientation of a stereopair of digital images, firstly, GCP(Ground Control Point) should be selected and then the work for measuring of image coordinates correspond to GCPs is required. In this study, we propose the method for extracting the GCP's image coordinates automatically using an image patch for control points and auxiliary points matching. For the evaluation of measurement accuracy, a comparison between points those are extracted manually and automatically by a proposed method have made. Finally, we shows the feasibility of automatic image coordinates measurment by applying in stereo modeling for SPOT images.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.

• Journal of KIBIM
• /
• v.13 no.4
• /
• pp.96-105
• /
• 2023

This study focuses on developing a building object recognition technology for efficient use in the remodeling of buildings constructed without drawings. In the era of the 4th industrial revolution, smart technologies are being developed. This research contributes to the architectural field by introducing a deep learning-based method for automatic object classification and recognition, utilizing point cloud data. We use a TD3D network with voxels, optimizing its performance through adjustments in voxel size and number of blocks. This technology enables the classification of building objects such as walls, floors, and roofs from 3D scanning data, labeling them in polygonal forms to minimize boundary ambiguities. However, challenges in object boundary classifications were observed. The model facilitates the automatic classification of non-building objects, thereby reducing manual effort in data matching processes. It also distinguishes between elements to be demolished or retained during remodeling. The study minimized data set loss space by labeling using the extremities of the x, y, and z coordinates. The research aims to enhance the efficiency of building object classification and improve the quality of architectural plans by reducing manpower and time during remodeling. The study aligns with its goal of developing an efficient classification technology. Future work can extend to creating classified objects using parametric tools with polygon-labeled datasets, offering meaningful numerical analysis for remodeling processes. Continued research in this direction is anticipated to significantly advance the efficiency of building remodeling techniques.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.113-115
• /
• 2005

This thesis presents a method for 3D modeling of facial expression from frontal and mirror-reflected multi-image. Since the proposed system uses only one camera, two mirrors, and simple mirror's property, it is robust, accurate and inexpensive. In addition, we can avoid the problem of synchronization between data among different cameras. Mirrors located near one's cheeks can reflect the side views of markers on one's face. To optimize our system, we must select feature points of face intimately associated with human's emotions. Therefore we refer to the FDP (Facial Definition Parameters) and FAP (Facial Animation Parameters) defined by MPEG-4 SNHC (Synlhetic/Natural Hybrid Coding). We put colorful dot markers on selected feature points of face to detect movement of facial deformation when subject makes variety expressions. Before computing the 3D coordinates of extracted facial feature points, we properly grouped these points according to relative part. This makes our matching process automatically. We experiment on about twenty koreans the subject of our experiment in their late twenties and early thirties. Finally, we verify the performance of the proposed method tv simulating an animation of 3D facial expression.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.2
• /
• pp.173-182
• /
• 2014

The structured singular value (${\mu}$) analysis based method has many advantages for the robust stability analysis of missiles with uncertain parameters. Nevertheless, the present linear fractional transformation (LFT) modeling process, which is the basis of ${\mu}$ analysis, is complex, and not suitable for automatic implementation; on the other hand, ${\mu}$ analysis requires a large amount of computation, which is a burden for large-scale application. A constructive procedure, which is computationally more efficient, and which may lead to a lower order realization than existing algorithms, is proposed for LFT modeling. To reduce the calculation burden, an analysis method is developed, based on skew ${\mu}$. On this basis, calculation of the supremum of ${\mu}$ over a fixed frequency range converts into a single skew ${\mu}$ value calculation. Two algorithms are given, to calculate the upper and lower bounds of skew ${\mu}$, respectively. The validity of the proposed method is verified through robust stability analysis of a missile with real uncertain parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.56-63
• /
• 2015

Not only performance analysis but also power analysis at early design stages is important in designing a system-on-chip. We propose a power modeling based on clock gating enable signals that enables accurate power analysis at a high-level. Power state is defined as combinations of the values of the clock gating enable signals and we can extract the clock gating enable signals to generate the power model automatically. Experimental results show that the average power accuracy is about 96% and the speed gain of power analysis at the high-level power is about 280 times compared to that at the gate-level.

• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1519-1527
• /
• 2015

TFT-LCD automatic defect inspection system for detecting defects in place of the visual tester does pre-processing, candidate defect pixel detection, and recognition and classification through a blob analysis. An over-detection result of defects acts as an undue burden of blob analysis for recognition and classification. In this paper, we propose defect detection method based on the histogram distribution modeling of TFT-LCD image to minimize over-detection of candidate defective pixels. Primary defect candidate pixels are detected estimating the skewness of the luminance distribution histogram of the background pixels. Based on the detected defect pixels, the defective pixels other than noise pixels are detected using the distribution histogram model of the local area. Experimental results confirm that the proposed method shows an excellent defect detection result on the image containing the various types of defects and the reduction of the degree of over-detection as well.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.55-62
• /
• 2019

The stereo geometry establishment based on the precise sensor modeling is prerequisite for accurate stereo data processing. Ground control points are generally required for the accurate sensor modeling though it is not possible over the area where the accessibility is limited or reference data is not available. For the areas, the relative orientation should be carried out to improve the geometric consistency between the stereo data though it does not improve the absolute positional accuracy. The relative orientation requires conjugate points that are well distributed over the entire image region. Therefore the automatic conjugate point extraction is required because the manual operation is labor-intensive. In this study, we applied the method consisting of the key point extraction, the search space minimization based on the epipolar line, and the rigorous outlier detection based on the RPCs (Rational Polynomial Coefficients) bias compensation modeling. We tested different parameters of window sizes for Kompsat-2 across track stereo data and analyzed the RPCs precision after the bias compensation for the cases whether the epipolar line information is used or not. The experimental results showed that matching outliers were inevitable for the different matching parameterization but they were successfully detected and removed with the rigorous method for sub-pixel level of stereo RPCs precision.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.337-345
• /
• 2007

Nowadays, it is convenient to use 3D modeling tools for general planning before construction. Normally, a 3D model is built with 3D CAD such as 3D Studio Max, Maya, etc. or simply with AutoCAD. All these software packages are effective in building 3D models but difficult to use, because many provided functions and tools require prior knowledge to build both 2D and 3D designs. Moreover, the traditional method of building 3D models is most time-consuming as experienced operators and manual input are required. Therefore, how to minimize the building time of 3D models and provide easy-to-use functions for users who are not familiar with 3D modeling becomes important. In this paper, the VisualLISP programming language is used to create a convenient tool for efficient generation of 3D components for the AutoCAD environment. This tool will be demonstrated with the generation of a 3D sluice, an artificial passage for water fitted with a valve or gate to stop or regulate water flow. With the tool, users only need to enter the parameters of a sluice in the edit box and the 3D model will be automatically generated in a few seconds. By changing parameters in the edit box and pressing the "OK" button, a new 3D sluice model will be generated in a short while.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1029-1036
• /
• 2014

Several types of automatic 3D scanners are available for use in the 3D scanning industry, e.g., an automatic 3D scanner that uses a robot arm and one that uses an automatic rotary table. Specifically, these scanners are used to obtain a 3D shape using automatic assisting devices. Most of these scanners are required to perform numerous operations, such as merging, aligning, trimming, and filling holes. We are interested in developing an automatic 3D shape collection device using a spherical-coordinate-based guiding system. Then, the aim of the present study is to design an automatic guiding system that can automatically collect 3D shape data. We develop a 3D model of this system and measuring data which are collected by a personal computer. An optimal design of this system and the geometrical accuracy of the measured data are both evaluated using 3D modeling software. The developed system is then applied to an object having a highly complex shape and manifold sections. Our simulation results demonstrate that the developed system collects higher-quality 3D data than the conventional method.