• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.38-47
• /
• 1995

A new automatic cardiac output control algorithm for the motor-driven electromechanical total artificial heart(TAH) was developed based on the motor current waveform analysis without using any extra transducer. The basic control requirements of artificial heart can be described in terms of three features : preload sensitivity, afterload insensitivity, and balanced ventricular outputs. In the previous studies, many transducers were utilized to obtain informations of hemodynamic states for the automatic cardiac output control, But such automatic control systems with sensors have had reliability problems. We proposed a new sensorless automatic cardiac output control algorithm providing adequate cardiac output to the time-varying physiological demand without causing right atrial collapse, which is one of the critical problem in an active-filling type device. In-vitro tests were performed on a mock circulation system to evaluate the performance of the developed algorithm and the results show that the new algorithm satisfied the basic control requirements on the cardiac output response and the possibility of application of the developed algorithm to in vivo experiments.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1720-1724
• /
• 2012

This study describes an oscillometric-based blood pressure measuring algorithm by detecting turning points of oscillation signal from digitally filtered cuff signals of an automatic sphygmomanometer. The blood pressure measuring algorithm uses a characteristic ratios method from the turning points. The accurate values of the systolic/diastolic blood presures(SBP/DBP) are calculated using the peaks in the ranges of characteristic ratios. Performances of the proposed algorithm and four automatic sphygmomanometers are compared with the mercury manometer(manual type sphygmomanometer), regarding the SBP and DBP values of manual sphygmomanometer as the reference values. The performance test showed the proposed algorithm revealed the best results in errors and a statistical analysis. Therefore this algorithm can be usable in any automatic sphygmomanometers.ssure states. This may be compromising results for subject-independent sensibility evaluation using EEG signal.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.43-51
• /
• 2004

In this paper, the element combination algorithm for designing an arbitrary type of the automatic transmissions is proposed. The powertrain simulation software using this algorithm is then developed. The deliveries of the angular velocities and torques are only considered for the motion characteristics of the automatic transmissions. The effects of the vibration and noise are not considered. The automatic transmission is defined by the basic elements, i.e., planetary gear set, clutch, brake, shaft, general gear, and inertia. The transmission system is defined by the combination of these elements. The element combination matrices automatically generate the equations of motion for each shift. The self error-correcting algorithm is also developed to verify the element combination algorithm. This automotive powertrain simulation/design software with user-friendly graphic user interface has two main modules. The first module, the automatic powerflow generation module, mainly consists of the automatic powerflow and component generation algorithms. This paper covers the theory and application for the first module. The second module deals with the automatic system generation algorithm and will be discussed in the second paper.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.14-22
• /
• 2016

신관은 다양한 부품과 복잡성으로 인해 육안 검사 시 휴먼에러가 발생할 수 있으며 부품 누락, 장전된 신관 등이 제품에 혼입될 경우 탄약이 폭발할 가능성을 내재하고 있다. 본 논문에서는 신관 검사 시 휴먼에러를 방지하기 위한 탄약 자동화검사 알고리즘을 제안한다. 탄약 자동화검사 알고리즘은 다음과 같은 세 단계로 구성된다. 첫 번째로 검사 이미지 입력 및 전처리 단계로써 검사 대상 이미지를 입력하고, 이미지 회전 알고리즘을 적용하여 이미지를 회전한 후 이진화 알고리즘을 사용하여 이미지를 컴퓨터 계산에 적합하도록 이진화한다. 두 번째로 장전 및 비장전 여부를 검사하는 단계로써 Masked Template Matching 알고리즘 등을 활용하여 탄약의 장전여부를 판단한다. 세 번째로 부품검사 단계로써 이미지 탐색 알고리즘 등을 활용하여 부품 위치나 부품 누락 여부에 대해서 판단한다. 본 탄약 자동화검사 알고리즘을 신관 검사에 적용한 결과 부품 누락, 장전 여부 등을 오류 없이 효율적으로 검출함으로써 40mm 고속유탄 신관의 신뢰성 및 안전성 향상에 기여할 것으로 판단된다.

• 환경영향평가
• /
• 제18권2호
• /
• pp.99-109
• /
• 2009

In general, manual calibration is commonly used for the stream water quality modelling. Because the manual calibration depends upon the subjectivity and experience of the researcher, it has a problem with the objectivity of the modelling. Thus, the interest about the automatic calibration by the optimization technique is deeply increased. In this study, Influence coefficient algorithm and Genetic algorithm are introduced to develop an automatic calibration model for the QUAL2K that are the latest version of the QUAL2E. Genetic algorithm, used in this study, is very simple and easy to understand but also applicable to any complicated mathematical problem, and it can find out the global optimum solution effectively. The developed automatic calibration model is applied to the Gangneung Namdaecheon. The calibration results about the 11 water quality variables show the good correspondence between the calculated and observed water quality values.

• 한국도서관정보학회지
• /
• 제39권4호
• /
• pp.283-304
• /
• 2008

본 연구의 목적은 이용자의 탐색 행태, 시스템의 정보 구축 행태를 기반으로 초기 질의어의 범주에 해당하는 연관 용어들(해당 용어의 지식구조와 관련된 연관 용어들)을 학습기능을 통해 자동으로 제시해 줄 수 있는 지능형 검색 시스템을 구현하는 것이다. 이를 위해 학습을 통해 전문가 수준의 색인어를 추출할 수 있는 지능형자동색인 알고리즘, 자동분류에 관련한 클러스터링 알고리즘과 문서 범주화 알고리즘 그리고 범주 표현 알고리즘에 대한 이론적 연구를 수행하였으며, 이들 이론적 연구를 근거로 비용과 시간적인 측면에서 그리고 재현율과 정도율이란 측면에서 우수한 성능을 발휘할 수 있는 지능형검색시스템을 구현하였다.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.29-37
• /
• 2007

In the automatic operation of an urban rail vehicle, a conventional PID control algorithm is applied to run the vehicle between stations within time limit and jerk limit. But the energy consumption in the automatic operation is much higher than in the manual operation. In this study, the optimal control algorithm for automatic operation is proposed to minimize energy consumption, which satisfies automatic operation for the urban rail vehicle, compared with the conventional PID control algorithm.

• 대한교통학회지
• /
• 제19권6호
• /
• pp.7-17
• /
• 2001

본 연구는 교통관리 시스템의 유고검지 체계를 검토하여 기존 체계의 문제점과 한계점을 극복할 수 있는 새로운 검지체계를 구축하고 새로 구축된 검지 체계에 맞는 알고리즘을 개발하는데 연구 목적이 있다. 새로운 검지체계는 검지기 1개소의 설치로 다차로를 검지할 수 있으며 특히 1개 차로 내에서도 검지영역을 여러 개 검지할 수 있는 다 검지체계의 장점을 최대한 살린 시스템이므로 기존 체계의 한계성인 단일 검지영역 문제를 해소할 수 있으며 경제적으로 교통관리 시스템을 구축할 수 있는 장점을 가지고 있다. 이 시스템으로 고속도로와 국도상에서 유고 검지율을 기존의 APID와 DES를 비교하여 현장 시험 평가한 결과 이 시스템이 제일 높은 유고 검지율을 나타내어 기존 시스템보다 우수한 것으로 판명되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.383-391
• /
• 1993

In this paper, a new automatic cardiac output control algorithm without any pressure sensors for the motor-driven electromechanical total artificial heart(TAH) was developed using motor current information. In the previous studies, many transducers were utilized to obtain informations of hemodynamic states for the automatic cardiac output control. But. such automatic control with sensors has some problems. To solve these problems, I proposed a new "sensorless" automatic cardiac output control algorithm providing the adequate cardiac output to the time-varying physiological demand without right atrial collapse. In-vitro tests were performed to evaluate the performance of a new algorithm and it satisfied the basic three requirements on the pump output response through the mock circulation tests.