• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.253-259
• /
• 2016

Recently, not only domestic businesses but also overseas businesses are expanding development and investment in automated warehouses as domestic and foreign logistics environments undergo drastic change. In such an environment, automated warehouse systems are being rapidly changed, and automated warehouse systems equipped with diversified functions are being developed accordingly. But the assessment systems of developed automated warehouse system is at a standstill. In the present article, characteristics of the automated warehouse systems in diversified development and trends of technology were analyzed, based on which evaluation items of functional suitability and reliability were derived by referring to ISO/IEC 25000 as the international quality assessment standard to secure reliability of the automated warehouse system, and an evaluation model was developed through the derived evaluation items. Through the present article, evaluation standards of functional suitability and reliability to enhance quality levels of automated warehouse systems are considered to be secured.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.1
• /
• pp.6-12
• /
• 2017

Regulation for the testing and operation of automated vehicles on public roadways has been recently developed all over the world. For example, the licensing standards and the evaluation technology for automated vehicles have been proposed in California, Nevada and EU. But specific safety evaluation scenarios for automated vehicles have not been proposed yet. This paper presents safety evaluation scenarios for extraordinary service permission of automated vehicles on highways. A total of seven scenarios are selected in consideration of safety priority and real traffic situation. Six scenarios are relevant with lane keeping and one scenario is relevant with lane change. All scenarios are developed based on existing ADAS evaluation scenarios and repeated simulation of automated vehicle algorithm. Safety evaluation factors as well as scenarios are developed. The safety factors are based on existing ADAS ISO requirements, ADAS safety factors and current traffic regulations. For the scenarios, a hunter vehicle is needed in addition to automated vehicle evaluated. The hunter vehicle performs multiple roles like preceding vehicle, cut-in vehicle and so on. The hunter vehicle is also automated vehicle equipped with high performance GPS, radar and Lidar. All the scenarios can be implemented by driving a lap on a KATRI ITS test track. These scenarios and safety evaluation factors are investigated via both a computer simulation and an experimental vehicle test on the test track. The experimental vehicle test was conducted with two automated vehicles, which are the evaluated vehicle and the hunter vehicle.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.15-23
• /
• 2020

Automated driving car is drawing attention as a seminal service representing 4th industrial revolution era based on 5G network, AI, IOT and sensor technology. automated driving car is expected to evolve into the final level which does not require driver's input. Drivers are able to consume new additional time in private space. Many industries started to compete to control these time and space. Media industry is expecting quite big change due to the introduction of automated driving cars. This research examines the impact of the media industry and social & institutional issues of automated driving cars based on depth interviews of experts. The introduction of automated driving cars is giving new opportunity for media industry as contents provider. Telcos and IT corporations are expected to compete each other to get the control of infotainment systems of automated driving cars. The reform of current regulations regarding car driving is pointed as important task to protect private information and the introduction of automated driving cars.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.284-298
• /
• 2023

With the rapid advances in automated driving technology, opportunities to experience automated driving directly or indirectly are being provided to the public. On the other hand, research on the preferred automated driving patterns from the user's perspective has not been conducted in Korea. This study used a driving simulator and an experimental vehicle capable of automated driving to evaluate the user satisfaction regarding longitudinal and lateral accelerations. Automated driving patterns were implemented in a virtual environment simulation using five values of longitudinal and lateral accelerations derived from driving experiments. Among these values, three were implemented through experimental vehicle-based automated driving to evaluate satisfaction and anxiety. The participants evaluated lateral acceleration more sensitively than longitudinal acceleration and showed higher levels of anxiety. Based on these results, the necessity of user-oriented evaluation research for automated driving patterns and the suitability of simulator-based evaluation methods were presented.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.44-58
• /
• 2017

The inspection for building occupancy authorization has lacked objectivity due to manual measurement methods. This is why connivance of the illegal buildings has been rampant, which has led to so many incidents. Consequently, this law has lost its intent to protect people's lives and property. In this study, for the purpose of improvement of this law, the research was conducted by the utilization of unmanned aerial vehicle for automated inspection for building occupancy authorization. Theoretical considerations about building occupancy authorization and the trend of UAV technology were accomplished. Secondly, a series of reverse engineering was conducted including digital photography, network RTK-VRS surveying and post-processing data. Thirdly, the resultant spatial information was used for building occupancy inspection authorization in a BIM platform and the effectiveness and applicability of UAV-based inspection was analyzed. As a result, methodology for UAV-based automated building occupancy inspection authorization was derived. And it was found that eleven items would be possible to be automated among thirty total items for building occupancy authorization. Also it was found that UAV-based automated inspection could be valid in inspecting building occupancy authorization due to authentic accuracy, effectiveness and applicability with government policy.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.4
• /
• pp.65-74
• /
• 2018

The primary objective of this study is to develop a conceptual design of automated pothole patching machine that improves the conventional work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)selection of element technology for conceptual design, 3)deduction of work process and conceptual design, 4)life cycle cost analysis of the conceptual design. As a result, X-Y table telescopic manipulator, pothole patching end effector, realtime pothole recognizer, 3D pothole volume profiler, automated pothole patching machine controller are selected as core technologies. Furthermore, a conceptual design and working process of an automated pothole patching machine are developed based on the core technologies. According to the life cycle cost analysis result, the cost of the automated method was 38.3% less than that of the conventional method, and the economic efficiency was also superior(ROR 77.1%, Break-even Point 23.8month). It is expected that the application range and impact on the construction industry will be enormous due to the increasing trend of road maintenance market.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.3
• /
• pp.287-293
• /
• 2015

With the rise in oil prices and ongoing concerns about environment, there is an increased amount of interest in automated manual transmission (AMT) vehicles. Torque control in an AMT vehicle is attained by controlling the displacement of the dry-type clutch's actuator. To provide good ride comfort akin to that of an automatic transmission vehicle, the clutch control is vital to an AMT vehicle. In this study, a method of obtaining the clutch torque from a dynamometer test is devised. This method is able to identify the relationship between the displacement of the clutch actuator and the clutch torque. A simulator for estimating the performance of an AMT vehicle is developed using MATLAB Simulink. The results obtained from both the vehicle and simulation exhibit a similar trend.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.5
• /
• pp.707-717
• /
• 2024

Recently, the implementation of unmanned and automated technologies has been actively considered as a solution to reduce safety accidents in industrial sites. However, bridge construction sites are recognized as a more challenging area for research and development compared to other industries due to the complexity of the site, such as weather and terrain, and the fact that the work is not repetitive or standardized. In this paper, a formwork system for unmanned and automated construction of bridge piers, which are considered high-risk work environments due to tasks such as rebar assembly, concrete pouring, and formwork dismantling and assembly at high altitudes, was developed. To achieve this, the formwork was equipped with motorized spindles and an automated lifting system to replace the manual dismantling and assembly process. Additionally, manipulators were installed on the upper work platform to replace workers in tasks such as rebar assembly and concrete pouring. To verify the proposed technology, we aimed to demonstrate the feasibility of the automated formwork system for unmanned pier construction through an assembly test.

• Agribusiness and Information Management
• /
• v.6 no.1
• /
• pp.30-36
• /
• 2014

This study was conducted to determine the major patent and analyze the patent trend of unmanned and automated agricultural production for the open field operation. As a result of conducting a search for patent applications related to these technologies, 1,080 valid patents were selected by evaluating the relevance of the patents and removing noise patents. As a result of the country-based analysis using the selected valid patents, it was found out that the largest number of patent applications were filed in the United States with 541 cases, followed by Japan with 326 cases, the European Union with 128 cases, and Korea with 85 cases. Upon classifying the valid patents into core technology, the path generation and tracking technology accounts for 33% with 353 cases; the implementing control with environmental condition technology accounts for 22% with 236 cases; the robot design technology accounts for 21% with 228 cases; the plant and environment sensing technology accounts for 19% with 206 cases; the yield and quality monitoring technology accounts for 5% with 58 cases. Finally, 10 core patents were selected by performing a patent index evaluation. The United States registered all of the 10 core patents. The results showed that Korea falls behind in the open field-related unmanned and automated agricultural production, compared to other developed agricultural countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5184-5191
• /
• 2013

The automated quantity take off technique using BIM authoring tools has been recently issued, and the studies of this method for the accuracy, efficiency, and the unit computing for the simple volume, area and number have been developed. Meanwhile the main concerns such as the details for the level of modelling, and the costs and time for the calculating BOQ item are still required to study. In this paper, the earth works, drainage works, pavement works, and facility works using BIM authoring tools are designed in 3D, and the applicability of automated quantity take off technique using BIM authoring tools is discussed, respectively. As a result, automated quantity take off are limited in the earth works, drainage works, pavement works, and facility works. But Most items of BOQ can be supported in Re-bar model.