• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.3
• /
• pp.35-42
• /
• 1984

In this paper, the lateral motions of a ship in the time domain are treated by applying the Impulse Response Function Technique. The acceleration, and displacement of a ship in the time domain are needed for the purpose of such automatic controls as the fire control system and the auto-pilot of ocean-going vessels, etc. The response Amplitude Operators of a ship are calculated by the Strip Method of Salvesen-Tuck-Faltinsen, and the Pierson-Moskowitz Spectrum multiplied by spreading function is used to represent the short crested ocean waves. The ocean wave elevations in the time domain are simulated according to the Method of Borgman. Finally the rudder effect is considered by simply adding the force and moment due to the rudder to the wave exciting force. And the results of lateral motions with and without rudder are shown.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.28-33
• /
• 2005

In this paper, we developed the algorithm to control longitudinal and lateral motion of UAV(Unmanned Aerial Vehicle) with Infrared heat sensors and GPS(Global Positioning System) receiver. UAV was controlled to be flown horizontally and also turned coordinately maintaining the constant altitude. Accomplishing the flight test of UAV sevral times, we were able to develope low price controller to control bank angle for lateral motion, and also pitch angle and altitude for longitudinal motion simultaneously.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.96-101
• /
• 2010

접안을 위해 선박이 안벽으로 접근할 때나, 좁은 항내에서 선박을 조종할 때는 항해 중에서보다 많은 제약이 따른다. 그것은 대형 선박일수도 분 관성력으로 인해 효과적인 제어가 어렵기 때문이다. 그래서 터그보트를 수동적으로 제어하여 선박을 접안시키는 것이 현재로선 가장 일반적이 접안기술이라 할 수 있다. 지능적인 제어기술을 적용하여 자동접안을 시도하려는 연구결과가 보고되고 있으나, 대부분이 auto-pilot 기술에 지나지 않으며 어느 것 하나 안정적인 접안을 위한 접안기술로 볼 수 없다. 이와 같이 터그보트를 이용할 수밖에 없는 현실이라면, 보다 효과적인 터그보트 제어기술을 기반으로 한 접안지원시스템을 개발하는 것이 우선일 것이다. 그래서 본 논문에서는 터그보트의 원격제어를 통해 모선을 효과적이고 안정적으로 접안하는 문제에 대해 고찰하였다. 즉, 터그보트로 조종되는 선박조종시스템에 대한 모델링을 수행하고, 터그보트로부터 발생되는 제어력을 적절히 분배하여 모선을 제어하는 새로운 접안지원시스템을 개발하였다. 시뮬레이션을 통해 제안된 시스템의 유효성을 검증하였다.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.6-13
• /
• 2022

The Ministry of Land, Infrastructure and Transport (MoLIT) and the Korean Automobile Testing and Research Institute (KATRI) are supporting the development of Lv.3 automated vehicle (hereinafter, AV) technology by constructing an automated driving pilot city (as known as K-City) equipped with total 5 evaluation environments (urban, motorway, suburban, community road, and autonomous parking facility) which is a test bed exclusively for AV (2017~2018). An upgrade project is in a progress to materialize harsh environments such as bad weather (rain, fog, etc.) and reproduction of communication jamming (GPS blocking, etc.) with the purpose of supporting the development of Lv.4 connected & automated vehicle (hereinafter, CAV) technology (2019~2022). We intend to proactively establish a national level standard for CAV test-bed and test road requirements, test method, etc. for establishment of a road map for the construction of the test bed which is being promoted step by step and analyze and, when required, benchmark the case of China that has announced and is utilizing it. Through this, we plan to define standardized requirements (evaluation facility, evaluation system, etc.) on the test bed for the development of Lv.4/4+ CAV technology and utilize the same for the design and construction of a test bed, establishment of a road map for the construction of a real car-based test environment related to the support for autonomous driving service substantiation, etc. through provision of an evaluation environment utilizing K-City, and the establishment of a K-City upgrade strategies, etc.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.296-303
• /
• 2014

Recently a system is being required to replace ILS due to increasing air traffic. In this paper, Curved approach is applied to an airport where ILS approach cannot be applied due to its geographical condition and restricted aerospace condition, and verified by flight test. After analysing conditions of Tae-an airfield of Hanseo University with virtual ILS approach, airfield applicability was evaluated by Curved approach using by GPS. Normally simulation is performed after establishing approach procedure using electric map, but recently verification is being performed by flight test without simulation because accuracy and reliability are increased. In this paper, established procedure is verified modified by flight test with Pilot Test and Auto Pilot test and controllability and passenger's stability were also checked.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.794-806
• /
• 2004

This paper deals with correction of frequency offset and analysis of quantization angle noise in the IEEE 802.1la OFDM system. The rotation phase per symbol due to the carrier frequency offset is estimated from auto-correlation of the short Preambles, which are over-sampled for the reduction of noise in OFDM signals. The pilot signals are introduced to estimate the rotation phase per OFDM symbol due to estimation error of the carrier frequency offset and the sampling frequency onset. During the estimation and correction of the frequency onsets, a CORDIC processor and a look-up table are used for the conversion between a rotation phase and its complex number. Being calculated by a limited number of bits in the CORDIC processor and the look-up table, the rotation phase and its complex number have quantization angle errors. The quantization errors are analyzed as SNR (signal to noise ratio) due to the quantization bit numbers. The minimum bit number is suggested to meet the specification of IEEE 802.1la properly. Finally, the quantization errors are evaluated through simulations on number of quantization bits and SNR of received signals.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.167-170
• /
• 2013

The objective of this paper is to describe the result of development of collision avoidance supporting system, based on the electronic chart display and information system(ECDIS). In real ship operations, collision accidents happen frequently due to human errors such as the lax vigilance, misinterpretation of international regulations for preventing collisions at sea (COLREGs). We developed a system which will help to avoid these kind of accidents. This system can automatically recognize the risk of collisions, generate the safe alternative routes that comply with COLREGs, and then deliver the results into auto pilot. A virtual simulation assuming progressive collision situations revealed the usefulness of this system.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.2
• /
• pp.75-80
• /
• 2023

Unmanned drone stations for automatic charging have been developed in order to overcome the flying time limitation of rotary wing drones. Since the drone stations is an unmanned operating system, each of the drones will be required to have a high degree of landing accuracy. Drone precision landing has been mainly studied depended on image processing technologies, but the image processing systems make several problems, such as the mission weight, the drone cost, and the development complexity increases, and the flight time decrease. Thus, this paper researched accuracy of precision landing based on RTK (real time kinetics) for rotary wing drones. For the experiments of RTK based precision landing, a drone repeatedly performed three missions. The survey accuracies of the RTK about missions respectively were set as 0.3, 0.2, and 0.1 meters. Each mission has one take-off point, two way-points and one landing-point, and was repeated ten times. The experiment results revealed landing error distance means of around 0.258, 0.12 and 0.057 meters on each of RTK setting.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1523-1528
• /
• 2012

This study was carried out to develop pilot plant Net3FM(Net Fit Fiber Filter Module) system and to suggest optimum operating condition for municipal wastewater reuse. SS concentration of biologically treated sewage effluent was reduced from 1.5~5.4mg/L to 0.4~1.0mg/L without coagulant injection in Net3FM system, and the SS removal efficiency was average 84.7%. And also, the removal efficiencies of COD and T-P were decreased slightly due to the SS removal by filtration. Coagulation-Filtration test was conducted to enhance the removal efficiencies of SS and T-P. The optimum dosage of coagulant was injected automatically by auto-controlling system, which is controlled by detecting value of turbidity of secondary sewage effluent. SS, COD and T-P concentrations in filtrated effluent were 0.21~0.57, 1.6~6.2 and 0.137~0.392mg/L with coagulant injection by in-line mixer in Net3FM system, respectively. The removal efficiencies of SS and T-P were highly increased to 92.8% and 89.8%, respectively. It was due to the combined the processes of coagulation and filtration. Net3FM system was evaluated that the removal efficiency of pollutants in secondary sewage effluent and the utilization potential as reclaimed water technology were very high.