• 한국정보통신학회논문지
• /
• 제19권6호
• /
• pp.1493-1498
• /
• 2015

자동초점이란 영상을 획득하는 시스템에서 고정된 촬상면에 자동으로 초점이 맺히도록 렌즈를 구동시키는 방식으로 컴퓨터비전과 카메라 등에서 매우 중요하게 사용된다. 소형 카메라의 경우 자동초점에서 렌즈구동부인 actuator의 기술은 대량생산이 이용이하고, 위치센서가 불필요하며, 회로구성이 용이한 VCM방식이 널리 사용되고 있으며, 구동의 안정성에 비해 크기와 소음이 큰 스테핑모터 방식, 크기는 가장 작지만 납 함유문제 및 습도 취약성을 갖는 피에조 방식이 있다. 그 외에 액체렌즈방식이 있는데, 소형 구조에 저전력의 장점이 있지만 화질 및 신뢰성 검증 그리고 고압이 필요한 특징을 가지는 구조도 있다. 본 논문에서 5Mpixel급 이미지 센서를 통해 획득한 영상의 선예도를 이용하여 VCM의 actuator처럼 액체렌지를 제어할 수 있는 제어 시스템을 두 가지를 구현하여 자동으로 초점을 맞추는 기능을 구현 검증하였다.

• 한국산업정보학회논문지
• /
• 제20권2호
• /
• pp.45-56
• /
• 2015

본 논문에서는 스마트폰 카메라의 객체기반 자동초점 기능을 위해, 움직이는 물체의 고속 추적 방법을 제안한다. 사양이 낮은 플랫폼에서의 비-학습 제약을 고려하여 히스토그램 특징 기반의 슬라이딩 윈도우 검출 기법을 사용한다. 각 부분 윈도우에 대한 히스토그램의 계산 시간문제는 적분 히스토그램을 통해 해결한다. 본 논문에서는 지역적 후보 검출, 적응적 템플릿 크기 방법을 제안한다. 또한 추적 위치의 안정화를 위해 정합 함수에 안정화 항을 추가하는 기법을 제안한다. 자체 수집한 데이터에 대한 실험결과는 PC 환경에서 초당 100 프레임 수준의 높은 처리 속도 달성을 보여주었다.

• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.246-251
• /
• 2014

The recent rise of the three-dimensional television (3DTV) industry has led to a wide exploitation of the dual-lens stereoscopic camera. However, when the zoom-in function is used, it is possible that a camera object is magnified only with a fixed convergence point, thereby leading to visual discomfort. In this paper, we propose several methods based on which a convergence point can be adjusted to prevent visual discomfort during zoom-in for a dual-lens stereoscopic camera. Further, we produce 3D contents by applying the proposed methods to certain cases and at certain distances and conduct a subjective evaluation. On the subjective evaluation, 48 subjects watch the 3D contents created by the proposed methods and score the stages of the visual comfort. The result of the subjective evaluation shows that some of the proposed methods are more efficient than the others. We hope that these proposed high-efficiency methods can be applied to produce a dual-lens stereoscopic camera that allows convenient stereoscopic photography.

• IMMUNE NETWORK
• /
• 제14권1호
• /
• pp.7-13
• /
• 2014

Molecular mimicry is an attractive mechanism for triggering autoimmunity. In this review, we explore the potential role of evolutionary conserved bacterial proteins in the production of autoantibodies with focus on granulomatosis with polyangiitis (GPA) and rheumatoid arthritis (RA). Seven autoantigens characterized in GPA and RA were BLASTed against a bacterial protein database. Of the seven autoantigens, proteinase 3, type II collagen, binding immunoglobulin protein, glucose-6-phosphate isomerase, ${\alpha}$-enolase, and heterogeneous nuclear ribonuclear protein have well-conserved bacterial orthologs. Importantly, those bacterial orthologs are also found in human-associated bacteria. The wide distribution of the highly conserved stress proteins or enzymes among the members of the normal flora and common infectious microorganisms raises a new question on how cross-reactive autoantibodies are not produced during the immune response to these bacteria in most healthy people. Understanding the mechanisms that deselect auto-reactive B cell clones during the germinal center reaction to homologous foreign antigens may provide a novel strategy to treat autoimmune diseases.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2001

This paper describes a research work of developing system for conceptual die design system for Fine blanking. The method of approaching to the system is based on the knowledge-based rules. Knowledge for the system is formulated from experimental results and the empirical knowledge of field experts. This system has been written in VisualLISP on the AutoCAD using a personal computer and in Microsoft Visual Basic ver.6.0. Transference of data is accomplished by DXF (Drawing Exchange Format) method. This system consists of six modules, which are cognition of a drawing, cognition of shear length, calculation of shear force, materials properties database, determination of degree of difficulty of the product, determination of approximate life of punch and die modules. Results carried out in each module will provide efficiency to the designer and the manufacturer of die for Fine blanking. But the main focus of this system is the design of die for Fine blanking in the level of general concept. In order to use powerful tool in this field, developed system will be studied continuously.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.58-66
• /
• 2010

The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.109-114
• /
• 2013

Regulations on exhaust emissions for vehicles and ships are reinforced. Therefore, researchers are focus on developing an excellent engine that emits less environmental pollutants and leads to high gas milage. The purpose of this study is to investigate the efficiency of intake super charging system. Super charger is the special device for improving performance of intake system. Futhermore, for reducing exhaust emissions, the examine are performed on the effectiveness of device structures that tow materials for performance improvement. To fulfill the purpose, Super charger materials of aluminum alloy(AL6262) and polycarbonate were selected and then their temperature change of super charger and inhalation efficiency were analyzed by ANSYS program. In addition, it is attempted to apply these results to device development by comparing the results with the real value. As a result, there was less temperature change of super charger in aluminum materials than polycarbonate, and HC and NOx were decreased when the super charger was installed.

• 천문학회보
• /
• 제43권1호
• /
• pp.67.3-68
• /
• 2018

We plan to automatize the operation of Kyung Hee Astronomical Observatory (KHAO) 76 cm Telescope by adapting KAOS30 (KHU Automatic Observing Software for McDonald 30 inch Telescope). The software is developed to improve the efficiency of the observation system for monitoring transients and variable sources. It has installed and operated at McDonald 30 inch telescope since 2017 August. KAOS76 (KHU Automatic Observing Software for KHAO 76 cm Telescope) consists of four packages: Telescope Control Package (TCP), Data Acquisition Package (DAP), Auto Focus Package (AFP), and Script Mode Package (SMP). Most of the packages can be configured by minimized modifications of the codes because it includes common libraries for FLI instruments and also ASCOM standard. TCP, DAP, and AFP control astronomical devices. SMP supports automatic observing in a script mode. TCP of KAOS76 can communicate with the TCS via ASCOM. Also, KAOS76 has an extra function to compensate the misalignment of the polar axis. In this poster, we show the current status of the observing system with KAOS76.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.995-1000
• /
• 2010

With the development of the auto industry, the automobile manufacturers demand to shorten development period and reduce the cost. Compared with the traditional method, applying the virtual prototype is more economical. This paper presents a method for parameters sensitivity analysis and optimizing the performance of vehicle noise and vibration. The existing design processes were repeatedly analyzed with a focus on vehicle performance to decide the design parameters of dimension, thickness, mounting type of body and chassis systems in the vehicle development period. This paper describes the prediction technique of vehicle performance using L18 orthogonal array layout, quality deviation analysis and parameter sensitivity analysis for robust design. This paper analyzed the performance correlation equation through the frequency and sensitivity database according to a design factor change. The new concept is that the performance prediction is possible without repeated activities of test and analysis. This paper described the parameter analysis applications such as bush dynamic stiffness and bush void direction of rear suspension. Design engineer could efficiently decide the design variable using parameter analysis database in early design stage. These improvements can reduce man hour and test development period as well as to achieve stable NVH performance.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.134-145
• /
• 2014

The number of lens groups in modern zoom camera systems is increased above that of conventional systems in order to improve the speed of the auto focus with the high quality image. As a result, it is difficult to calculate zoom loci using the conventional analytic method, and even the recent one-step advanced numerical calculation method is not optimal because of the time-consuming problem generated by the iteration method. In this paper, in order to solve this problem, we suggest a new unified analytic method for zoom lens loci with finite object distance including infinite object distance. This method is induced by systematically analyzing various distances between the object and other groups including the first lens group, for various situations corresponding to zooming equations of the finite lens systems after using a spline interpolation for each lens group. And we confirm the justification of the new method by using various zoom lens examples. By using this method, we can easily and quickly obtain the zoom lens loci not only without any calculation process of iteration but also without any limit on the group number and the object distance in every zoom lens system.