• 제목/요약/키워드: auger recombination

검색결과 17건 처리시간 0.024초

Theoretical Study of Auger Recombination of Excitons in Monolayer Transition-metal Dichalcogenides

  • Lee, Hyun Cheol
    • Journal of the Korean Physical Society
    • /
    • 제73권11호
    • /
    • pp.1735-1743
    • /
    • 2018
  • Excitons are the most prominent features of the optical properties of monolayer transition-metal dichalcogenides(TMDC). In view of optoelectronics it is very important to understand the decay mechanisms of the excitons of these materials. Auger recombination of excitons are regarded as one of the dominant decay processes. In this paper the Auger constant of recombination is computed based on the approach proposed by Kavoulakis and Baym. We obtain both temperature dependent (from type A, A' processes) and temperature independent (from type B, B' processes) contributions, and a numerical estimate of theoretical result yields the value of constant in the order of $10^{-2}cm^2s^{-1}$, being consistent with existing experimental data. This implies that Auger decay processes severely limit the photoluminescence yield of TMDC-based optoelectronic devices.

Delayed auger recombination in silicon measured by time-resolved X-ray scattering

  • Jo, Wonhyuk;Landahl, Eric C.;Kim, Seongheun;Lee, Dong Ryeol;Lee, Sooheyong
    • Current Applied Physics
    • /
    • 제18권11호
    • /
    • pp.1230-1234
    • /
    • 2018
  • We report a new method of measuring the non-radiative recombination rate in bulk Silicon. Synchrotron timeresolved x-ray scattering (TRXS) combines femtometer spatial sensitivity with nanosecond time resolution to record the temporal evolution of a crystal lattice following intense ultrafast laser excitation. Modeling this data requires an Auger recombination time that is considerably slower than previous measurements, which were made at lower laser intensities while probing only a relatively shallow surface depth. We attribute this difference to an enhanced Coulomb interaction that has been predicted to occur in bulk materials with high densities of photoexcited charge carriers.

Three-Temperature Modeling of Carrier-Phonon Interactions in Thin GaAs Film Structures Irradiated by Picosecond Pulse Lasers

  • Lee Seong-Hyuk;Lee Jung-Hee;Kang Kwan-Gu;Lee Joon-Sik
    • Journal of Mechanical Science and Technology
    • /
    • 제20권8호
    • /
    • pp.1292-1301
    • /
    • 2006
  • This article investigates numerically the carrier-phonon interactions in thin gallium arsenide (GaAs) film structures irradiated by subpicosecond laser pulses to figure out the role of several recombination processes on the energy transport during laser pulses and to examine the effects of laser fluences and pulses on non-equilibrium energy transfer characteristics in thin film structures. The self-consistent hydrodynamic equations derived from the Boltzmann transport equations are established for carriers and two different types of phonons, i.e., acoustic phonons and longitudinal optical (LO) phonons. From the results, it is found that the two-peak structure of carrier temperatures depends mainly on the pulse durations, laser fluences, and nonradiative recombination processes, two different phonons are in nonequilibrium state within such lagging times, and this lagging effect can be neglected for longer pulses. Finally, at the initial stage of laser irradiation, SRH recombination rates increases sufficiently because the abrupt increase in carrier number density no longer permits Auger recombination to be activated. For thin GaAs film structures, it is thus seen that Auger recombination is negligible even at high temperature during laser irradiation.

Dynamics and Bleaching of Ground State in CdSe/ZnS Quantum Dots

  • Kim, J.H.;Kyhm, K.
    • Journal of the Optical Society of Korea
    • /
    • 제10권4호
    • /
    • pp.184-187
    • /
    • 2006
  • For resonant excitation of the ground state $1s^e-1S^h_{3/2}$, dynamics of 'the electron-hole pair in a CdSe quantum dot was investigated by degenerate pump-probe measurement. At low e-h pair densities, the decay of $1s^e-1S^h_{3/2}$ state is dominated by radiative recombination. As the number of the electron-hole pairs increases, new decay features become significant. Theoretical comparison suggests this is attributed to the bi-molecular and Auger-type scattering.

펨토초급 극초단 펄스레이저에 의해 가열된 실리콘 내의 열전달 특성에 관한 수치해석 (Numerical Analysis on Heat Transfer Characteristics in Silicon Boated by Picosecond-to-Femtosecond Ultra-Short Pulse Laser)

  • 이성혁;이준식;박승호;최영기
    • 대한기계학회논문집B
    • /
    • 제26권10호
    • /
    • pp.1427-1435
    • /
    • 2002
  • The main aim of the present article is numerically to investigate the micro-scale heat transfer phenomena in a silicon microstructure irradiated by picosecond-to-femtosecond ultra-short laser pulses. Carrier-lattice non-equilibrium phenomena are simulated with a self-consistent numerical model based on Boltzmann transport theory to obtain the spatial and temporal evolutions of the lattice temperature, the carrier number density and its temperature. Especially, an equilibration time, after which carrier and lattice are in equilibrium, is newly introduced to quantify the time duration of non-equilibrium state. Significant increase in carrier temperature is observed for a few picosecond pulse laser, while the lattice temperature rise is relatively small with decreasing laser pulse width. It is also found that the laser fluence significantly affects the N 3 decaying rate of Auger recombination, the carrier temperature exhibits two peaks as a function of time due to Auger heating as well as direct laser heating of the carriers, and finally both laser fluence and pulse width play an important role in controlling the duration time of non-equilibrium between carrier and lattice.

Nonequilibrium Heat Transfer Characteristics During Ultrafast Pulse Laser Heating of a Silicon Microstructure

  • Lee Seong Hyuk
    • Journal of Mechanical Science and Technology
    • /
    • 제19권6호
    • /
    • pp.1378-1389
    • /
    • 2005
  • This work provides the fundamental knowledge of energy transport characteristics during very short-pulse laser heating of semiconductors from a microscopic viewpoint. Based on the self-consistent hydrodynamic equations, in-situ interactions between carriers, optical phonons, and acoustic phonons are simulated to figure out energy transport mechanism during ultrafast pulse laser heating of a silicon substrate through the detailed information on the time and spatial evolutions of each temperature for carriers, longitudinal optical (LO) phonons, acoustic phonons. It is found that nonequilibrium between LO phonons and acoustic phonons should be considered for ultrafast pulse laser heating problem, two-peak structures become apparently present for the subpicosecond pulses because of the Auger heating. A substantial increase in carrier temperature is observed for lasers with a few picosecond pulse duration, whereas the temperature rise of acoustic and phonon temperatures is relatively small with decreasing laser pulse widths. A slight lagging behavior is observed due to the differences in relaxation times and heat capacities between two different phonons. Moreover, the laser fluence has a significant effect on the decaying rate of the Auger recombination.

고품질 polysilicon/tunneling oxide 기반의 에미터 형성 공정에서의 Auger 재결합 조절 연구 (Study on Auger Recombination Control using Barrier SiO2 in High-Quality Polysilicon/Tunneling oxide based Emitter Formation)

  • 이희연;홍수범;김동환
    • Current Photovoltaic Research
    • /
    • 제12권2호
    • /
    • pp.31-36
    • /
    • 2024
  • Passivating contacts are a promising technology for achieving high efficiency Si solar cells by reducing direct metal/Si contact. Among them, a polysilicon (poly-Si) based passivating contact solar cells achieve high passivation quality through a tunnel oxide (SiOx) and poly-Si. In poly-Si/SiOx based solar cells, the passivation quality depends on the amount of dopant in-diffused into the bulk-Si. Therefore, our study fabricated cells by inserting silicon oxide (SiO2) as a doping barrier before doping and analyzed the barrier effect of SiO2. In the experiments, p+ poly-Si was formed using spin on dopant (SOD) method, and samples ware fabricated by controlling formation conditions such as existence of doping barrier and poly-Si thickness. Completed samples were measured using quasi steady state photoconductance (QSSPC). Based on these results, it was confirmed that possibility of achieving high Voc by inserting a doping barrier even with thin poly-Si. In conclusion, an improvement in implied Voc of up to approximately 20 mV was achieved compared to results with thicker poly-Si results.

바이어스 스트레스에 의한 실리콘-게르마늄 이종접합 바이폴라 트랜지스터의 열화 현상 (The degradation phenomena in SiGe hetero-junction bipolar transistors induced by bias stress)

  • 이승윤;유병곤
    • 한국진공학회지
    • /
    • 제14권4호
    • /
    • pp.229-237
    • /
    • 2005
  • 바이어스 스트레스 인가 후에 발생하는 실리콘-게르마늄 이종접합 바이폴라 트랜지스터(SiGe HBT)의 열화현상을 고찰하였다. SiGe HBT가 바이어스 스트레스에 일정 시간 노출되면 소자 내부의 변화에 의하여 소자 파라미터가 원래 값으로부터 벗어나게 된다. 에미터-베이스 접합에 역방향 바이어스 스트레스가 걸리면 전기장에 의해 가속된 캐리어가 재결합 중심을 생성하여 베이스 전류가 증가하고 전류이득이 감소한다. $140^{\circ}C$ 이상의 온도에서 높은 에미터 전류를 흘려주는 순방향 바이어스 전류 스트레스가 가해지면 Auger recombination이나 avalancHe multiplication에 의해 형성된 핫 캐리어가 전류이득의 변동을 유발한다. 높은 에미터 전류와 콜렉터-베이스 전압이 동시에 인가되는 mixed-mode 스트레스가 가해지면 에미터-베이스 역방향 바이어스 스트레스의 경우와 마찬가지로 베이스 전류가 증가한다. 그러나 miked-mode 스트레스 인가 후에는 inverse mode Gummel 곡선에서 베이스 전류 증가가 관찰되고 perimeter-to-area(P/A) 비가 작은 소자가 심각하게 열화되는 등 에미터-베이스 역방향 바이어스 스트레스와는 근본적으로 다른 신뢰성 저하 양상이 나타난다.

깊은 준위 결함에 의한 SiC SBD 전기적 특성에 대한 영향 분석 (The effect of deep level defects in SiC on the electrical characteristics of Schottky barrier diode structures)

  • 이건희;변동욱;신명철;구상모
    • 전기전자학회논문지
    • /
    • 제26권1호
    • /
    • pp.50-55
    • /
    • 2022
  • SiC는 차세대 전력반도체의 핵심 재료로 넓은 밴드갭과 높은 절연파괴강도, 열전도율을 가지고 있지만 deep level defect와 같은 다양한 문제를 야기하는 결함이 존재한다. SiC에서 나타나는 defect는 물성에서 나타나는 defect와 계면에서 나타나는 interface trap 2가지로 나뉜다. 본 논문은 상온 (300 K)에서 보고되는 Z1/2 trap concentration 0 ~ 9×1014 cm-3을 SiC substrate와 epi layer에 적용하여 turn-on 특성을 알아보고자 한다. 전류밀도와 SRH(Shockley-Read-Hall), Auger recombination을 통해 구조 내 재 결합률을 확인하였다. trap concentration이 증가할수록 turn-on시 전류밀도와 재 결합률은 감소하며 Ron은 0.004에서 0.022 mΩ으로 약 550% 증가하였다.

GaN 기반 발광 다이오드(LED)의 특성 분석 (Characteristic analysis of GaN-based Light Emitting Diode(LED))

  • 이재현;염기수
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.686-689
    • /
    • 2012
  • 본 논문에서는 ISE-TCAD를 이용하여 GaN 기반의 LED특성을 분석하였다. LED는 GaN 버퍼층을 기반으로 GaN 장벽과 InGaN 양자우물로 구성된 활성 영역, AlGaN EBL(Electron Blocking Layer)과 AlGaN HBL(Hole Blocking Layer)로 이루어져 있다. Auger 재결합률, 양자 우물의 폭과 수, EBL의 Al 몰분율의 변화에 따른 LED의 출력 전력 특성을 분석하고 효율 개선을 위한 몇 가지 기준을 제시하였다.

  • PDF