• ETRI Journal
• /
• 제30권3호
• /
• pp.451-460
• /
• 2008

Recently, the power consumption of integrated circuits has been attracting increasing attention. Many techniques have been studied to improve the power efficiency of digital signal processing units such as fast Fourier transform (FFT) processors, which are popularly employed in both traditional research fields, such as satellite communications, and thriving consumer electronics, such as wireless communications. This paper presents solutions based on parallel architectures for high throughput and power efficient FFT cores. Different combinations of hybrid low-power techniques are exploited to reduce power consumption, such as multiplierless units which replace the complex multipliers in FFTs, low-power commutators based on an advanced interconnection, and parallel-pipelined architectures. A number of FFT cores are implemented and evaluated for their power/area performance. The results show that up to 38% and 55% power savings can be achieved by the proposed pipelined FFTs and parallel-pipelined FFTs respectively, compared to the conventional pipelined FFT processor architectures.

• Applied Microscopy
• /
• 제42권3호
• /
• pp.164-173
• /
• 2012

The relaxor ferroelectric feature in lead-free perovskite oxides, where the dipoles are randomly oriented and they can be feasibly aligned parallel to the external bias, is attracting lots of attention in the field of piezoelectric materials science, since it is one of candidates to replace the toxic lead-based materials that are still being commercially used. However, the origin of relaxor characteristic and its related atomic structure are still ambiguous. In this study, $Na_{1/2}Bi_{1/2}TiO_3$, chosen as a model relaxor system, was found to exhibit a cationic-disordered atomic structure; and furthermore the nonpolar atomic structure and its related oxygen tilting were ascertained via annular bright field imaging skill. We also found that this cationic disordering gives rise to the local formation of atomic vacancies.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.138-145
• /
• 1998

Recently, TCS(Traction Control System) is attracting attention, because it maintains traction ability and steerability of vehicles on low-$\mu$ surface roads by controlling the slip rate between tire and road surface. The development of TCS control law is difficult due to the highly nonlinearity and uncertainty involved in TCS. A fuzzy logic approach is appealing for TCS. In this paper, fuzzy logic controller for TCS is introduced and evaluated by the computer simulation with 8 DOF vehicle model. The result indicate that the fuzzy logic TCS improves vehicle's stability and steerability.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.278-283
• /
• 2005

Cell cycle is regulated cooperatively by several genes. The dynamic regulatory mechanism of protein interaction network of cell cycle will be presented taking the budding yeast as a sample system. Based on the mathematical model developed by Chen et at. (MBC, 11,369), at first, the dynamic role of the feedback loops is investigated. Secondly, using a bifurcation diagram, dynamic analysis of the cell cycle regulation is illustrated. The bifurcation diagram is a kind of ‘dynamic road map’ with stable and unstable solutions. On the map, a stable solution denotes a ‘road’ attracting the state and an unstable solution ‘a repelling road’ The ‘START’ transition, the initiation of the cell cycle, occurs at the point where the dynamic road changes from a fixed point to an oscillatory solution. The 'FINISH' transition, the completion of a cell cycle, is returning back to the initial state. The bifurcation analysis for the mutants could be used uncovering the role of proteins in the cell cycle regulation network.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.194-201
• /
• 2005

Recently, as Rapid Prototyping is attracting people's attention, many peoples are actively participating in the research on STL format. The STL files are transformed to be input for RP after modeling in CAD system. When the shape, however, needs to be changed or edited, it is impossible without the original data. So, if the original data is lost, new modeling is required. Therefore, this study suggests a way to edit the shape in STL format and to make the Boolean operation possible between the original and edited shapes. In addition, the reliability was confirmed after going over the errors of the edited data.

• Tribology and Lubricants
• /
• 제11권2호
• /
• pp.15-23
• /
• 1995

A zero-load slider is composed of two outside rails which produce a lift force pushing up the slider from the disk surface and a wide reverse step region which produces a suction force attracting the slider to the disk surface. In this paper, the flying characteristics of zero-load sliders are obtained by using an optimization technique. In the pressure calculation module, the FIFD scheme is used to solve the modified Reynolds equation. The BFGS method and a line search algorithm is employed to predict the static flying attitude. To investigate the effect of the geometric- parameters of zero-load sliders on the flying characteristics, recess depth, front step width, rail width, and taper height are varied and the corresponding flying attitudes are obtained. Simulation results demonstrate that recess depth and rail width have significant influences on the flying characteristics.

• 수산경영론집
• /
• 제38권3호
• /
• pp.53-65
• /
• 2007

This study was to analyze amenity of the port landscapes for North port, South port, and Gamcheon port in Busan. Amenity related variables came from Semantic Differential(SD) method and then were conducted by the factor analysis. Multiple regression was done for the relationship between the amenity and factors. The result found 3 factors, including dynamics, stability, and familarity. Much importance was placed on dynamics among them. Therefore, building port landscapes and their image attracting tourists should consider dynamics in terms of port landscape plan and tourist attraction development for amenity quality management.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1495-1496
• /
• 2011

Anodic aluminum oxide (AAO) nanotemplates for nano electronic device applications have been attracting increasing interest because of ease of fabrication, low cost process, and possible fabrication in large area. The size and density of the nanostructured materials can be controlled by changing the pore diameter and the pole density of AAO nanotemplate. In this paper, AAO nanotemplate was fabricated by second anodization method. In addition, effects of electrolyte and anodization voltate on the microstructure of porous alumina films were investigated. Vertically well aligned pores had the average pore sizes of 15-70 nm and the length of approximately 40 ${\mu}m$.

• Environmental Engineering Research
• /
• 제16권1호
• /
• pp.35-39
• /
• 2011

An integrated gasification combined cycle (IGCC) system has been attracting attention due to its increased energy conversion efficiency and ability to treat various carbonaceous materials. IGCC is also expected to play an important role in the future supply of hydrogen energy. The use of a palladium-based membrane to separate the hydrogen from the synthesis gas stream has been intensively studied due to its exceptional hydrogen-separating capability. However, theoretical research on hydrogen separation is still an unfamiliar area in Korea. First-principle density functional theory was applied in this study to investigate the dissociative adsorption of hydrogen onto a palladium surface. The stability of hydrogen on the surface was theoretically evaluated with various adsorption configurations, partial pressures and temperatures. Further theoretical and experimental studies were also suggested to find a more hydrogen-selective material.

• 대한치과의사협회지
• /
• 제41권2호통권405호
• /
• pp.116-123
• /
• 2003

Antimicrobial Peptides are natural antibiotics evolved by many plants, invertebrate, and vertebrate to defend against the microbial infection. Antimicrobial peptides show a broad-spectrum antimicrobial activity with little opportunity for the development of resistance since they target microbial membranes that distinguish microbes from enkaryotic cells. The oral cavity is constantly exposed to microbial challenges and antimicrobial peptides play an important role in managing the oral health. With the increase of resistant micro-organisms to conventional antibiotics, antimicrobial peptides are attracting interests as novel antibiotics. In this review, the characteristics of antimicrobial of antimicrobial peptides including the classification, mechanism of action, resistance, and expression in the oral cavity have been discussed in the prospects of application to oral disease.