• 한국전자파학회논문지
• /
• 제15권1호
• /
• pp.29-35
• /
• 2004

광 펄스가 대기 공간을 통해 전파될 때, 광 펄스는 대기 교란으로 인해 감쇠되고 퍼지게 되며, 이러한 펄스 퍼짐은 광 수신단에서 도착되는 펄스의 요동으로 인해 발생한다. 디지털 광통신에서는 감쇠도 중요한 인자이지만 펄스 퍼짐이 더 중요한 인자로 작용한다. 이에, 본 논문에서는 교란 대기를 통해 전파되는 광 펄스의 퍼짐을 구하고, 이러한 펄스 퍼짐을 대기 교란 상수인 굴절률 구조함수로 나타내고 대기 교란 상태와 전송거리에 따른 펄스 퍼짐 정도를 시뮬레이션 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2297-2299
• /
• 2005

In this paper, a finite element (FEM) investigation of composite materials is studied. A pemittivity profile of the material is implemented to correspond to the Packing fraction of the physical composite. Curve fitting is applied to the standing wave pattern to determine the effective attenuation coefficient and propagation constant in the composite. The complex permittivity as a function of packing density is then determined. A comparison between the two dimensional and three dimensional measurement simulations is presented. An adaptive scheme is implemented to improve resolution of the finite element particulates.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.66-71
• /
• 2017

In this paper, we study the robustness of disturbance observer based controller for DC motor in the presence of unmodeled dynamics. It is well known that the robustness property usually becomes weaker as the control gain becomes larger. On the contrary to this expectation, it is shown that the phase margin of DOB controller remains quite a large value even though the time constant of Q-filter becomes smaller. The computer simulation results show that DOB controller is able to stabilize the motor system even in the presence of unmodeled dynamics. On the contrary, the unity-feedback system fails to maintain stability when a high gain feedback is employed for the purpose of achieving better disturbance attenuation performance.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.15-22
• /
• 2014

The automobile cruise control system tries to maintain a constant velocity in the face of disturbance mainly caused by mass changes or changes in the slope of a road. The controller should compensate for such disturbances and model uncertainties. In this paper, we study on the disturbance observer based controller for cruise control system. In the presence of disturbances and model uncertainties, we carry out computer simulations in order to compare the performance of the conventional PI controller and DOB controller. From the simulation results, we found that the performance of DOB controller is superior to that of the conventional PI controller.

• 한국전자파학회논문지
• /
• 제25권8호
• /
• pp.857-863
• /
• 2014

전자기파와 플라즈마의 상호 작용을 결정하는 주요 변수는 플라즈마 주파수와 충돌 주파수이며, 이 둘은 각각 전자 밀도와 전자 온도로부터 계산할 수 있다. 이 두 값은 플라즈마 발생기 종류에 따라 결정되는 시간 의존적인 변수이다. 기존의 전파 흡수 특성 연구에서는 수치 해석적 모형의 부재로 인하여 플라즈마의 시간적/공간적 변화를 간략화하거나, 상수로 가정하여 수행하였다. 본 연구에서는 플라즈마 유체 모델을 도입하여 얻어진 시간 의존적 변수 값을 전자기파감쇠량 계산에 이용함으로써 해석의 정확도를 높이는 방식을 제안하였다. 해석 대상인 유전체 장벽 방전 플라즈마는 구조적인 단순함으로 인하여 1차원 분석만으로 플라즈마 분포의 시간적 변화를 반영할 수 있다. 본 논문은 한 주기 내에서 전자 밀도와 전자 온도를 추출하여 마이크로파 입사 시 시간적 흡수 특성 변화를 분석하였다. 또한, 전자 밀도와 전자 온도의 변화에 따라 감쇠량을 계산하여 감쇠 경향성을 분석하였다.

• 한국수산과학회지
• /
• 제28권2호
• /
• pp.174-182
• /
• 1995

Using the optical data from the EUMELI 3 and 4 missions, the optical properties are discussed in relation to primary production in the oligotrophic zone of the Eastern Atlantic Ocean. The depth of euphotic layer $(Z_{eu})$, the total accumulated concentration of pigment $(C_{TOT})$ and the concentration of pigment (C) are 88m, $12.4mgm^{-2}\;and\;0.14mgm^{-3}$, respectively for the EUMELI 3 mission and 101.7m, $10.0mgm^{-2}\;and\;0.10mgm^{-3}$, respectively for the EUMELI 4 mission. The concentration of pigment is higher in autumn (EUMELI 3) than in spring (EUMELI 4). This indicates that the concentration of photosynthetic pigment has a close correlation with vertical attenuation coefficient $(K(\lambda))$ that changes seasonally in the euphotic layer. While the spectral distributions of downward Irradiance$(E_d)$ for the wave length of 470nm increase with depth, those of upward irradiance $(E_u)$ for the wave length range between 410nm and 490nm are constant, because the study area is covered with the blue and clear oceanic deep waters. The vertical attenuation coefficients of downward irradiance $(K_d)$ and upward irradiance $(K_u)$ have low values between 0.02 and $0.06m^{-1}$ due to the low absorption and scattering by the photosynthetic pigment of phytoplankton. Therefore this zone has the characteristics of the case 1 waters with low concentrations of photosynthetic pigment, and can be classifed into IB.

• 대한토목학회논문집
• /
• 제40권3호
• /
• pp.265-271
• /
• 2020

첨단 차량에서 가장 중요한 장비 중 하나인 차량레이더는 일반적으로 자동차와 같은 객체의 속도와 범위를 감지하는데 사용된다. 본 논문에서는 객체감지 이외에 차량레이더 자료를 이용하여 강수 정보를 추정하는 방법을 제안한다. 제안된 방법은 레이더 수신신호의 감쇠 정도가 강수 강도에 따라 다르다는 사실과 시공간적으로 짧은 관측에서는 강수의 분포가 일정하다는 가정에 근거한다. 본 논문은 차량 레이더를 이용하여 강수정보 추정에 대한 타당성을 평가하는데 목적이 있다. 실제 주행 중 제안 된 방법의 실현 가능성을 검증하기 위해, 다양한 강수 사상의 각 시간 세그먼트에 대한 강수정보 추정 방법이 적용되었다. 주행 현장실험의 결과로부터 제안된 방법이 다양한 강우 유형에서 강수 정보 추정에 적합하다는 것을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.31-36
• /
• 2000

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in the load bearing structures of pressurized components operating at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damage have been used. So far, the replica method is mainly used for the Inspection of High temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or integranular microcracks are carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation is analyzed. As a result of ultrasonic tests for crept specimens, we find that the sound velocity is decreased as the increase of creep life fraction$({\Phi}_c)$ and also, confirmed that hardness is decreased as the increase of creep life fraction$({\Phi}_c)$ but the coefficient of ultrasonic attenuation is increased as the increase of creep life fraction$({\Phi}_c)$. Finally based on the result in this paper, it can be recognized that the ultrasonic techniques using velocities and attenuation coefficient factor are very useful non-destructive methods to evaluate the degree of material degradation in fossile power plants.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1884-1893
• /
• 2016

The ride-through control of a doubly-fed induction generator (DFIG) for the voltage sags on wind farms utilizing crowbar circuits by which the rotor side converter (RSC) is disabled has being reported in many literatures. An analysis and calculation of the transient current when the RSC is switched off are of significance for carrying out the low voltage ride through (LVRT) of a DFIG. The mathematical derivation is highlighted in this paper. The zero-state and zero-input responses of the transient current in the frequency domain through a Laplace transformation are investigated, and the transient components in the time domain are achieved. With the characteristics worked out from the linear resolving without modeling simplification, the selection of the resistance in the linear crowbar circuit and the value conversion from a linear circuit to a nonlinear one is proposed to setup the attenuation rate. In terms of grid code requirements, the theoretical analysis for the time constant of the transient components attenuation insures the controllability when the excitation of the RSC is resumed and it guarantees the reserved time for the response of the reactive power compensation. Simulations are executed in MATLAB/SIMPOWER and experiments are carried out to validate the theoretical analysis. They indicate that the calculation method is effective for selection of the resistance in a crowbar circuit for LVRT operations.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.45-50
• /
• 2004

This paper describes a method of detecting formation boundaries, and permeable fractures, from frequency-domain Stoneley wave logs. Field data sets were collected between the depths of 330 and 360 m in well EE-4 in the Higashi-Hachimantai geothermal field, using a monopole acoustic logging tool with a source central frequency of 15 kHz. Stoneley wave amplitude spectra were calculated by performing a fast Fourier transform on the waveforms, and the spectra were then collected into a frequency-depth distribution of Stoneley wave amplitudes. The frequency-domain Stoneley wave log shows four main characteristic peaks at frequencies 6.5, 8.8, 12, and 13.3 kHz. The magnitudes of the Stoneley wave at these four frequencies are affected by formation properties. The Stoneley wave at higher frequencies (12 and 13.3 kHz) has higher amplitudes in hard formations than in soft formations, while the wave at lower frequencies (6.5 and 8.8 kHz) has higher amplitudes in soft formations than in hard formations. The correlation of the frequency-domain Stoneley wave log with the logs of lithology, degree of welding, and P-wave velocity is excellent, with all of them showing similar discontinuities at the depths of formation boundaries. It is obvious from these facts that the frequency-domain Stoneley wave log provides useful clues for detecting formation boundaries. The frequency-domain Stoneley wave logs are also applicable to the detection of a single permeable fracture. The procedure uses the Stoneley wave spectral amplitude logs at the four frequencies, and weighting functions. The optimally weighted sum of the four Stoneley wave spectral amplitudes becomes almost constant at all depths, except at the depth of a permeable fracture. The assumptions that underlie this procedure are that the energy of the Stoneley wave is conserved in continuous media, but that attenuation of the Stoneley wave may occur at a permeable fracture. This attenuation may take place at anyone of the four characteristic Stoneley wave frequencies. We think our multispectral approach is the only reliable method for the detection of permeable fractures.