• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.49-60
• /
• 2024

The purpose of this study establishes the deep neural network (DNN) and Decoder models to predict the flow and thermal fields of three-dimensional wavy wings as a passive flow control. The wide ranges of the wavy geometric parameters of wave amplitude and wave number are considered for the various the angles of attack and the aspect ratios of a wing. The huge dataset for training and test of the deep learning models are generated using computational fluid dynamics (CFD). The DNN and Decoder models exhibit quantitatively accurate predictions for aerodynamic coefficients and Nusselt numbers, also qualitative pressure, limiting streamlines, and Nusselt number distributions on the surface. Particularly, Decoder model regenerates the important flow features of tiny vortices in the valleys, which makes a delay of the stall. Also, the spiral vortical formation is realized by the Decoder model, which enhances the lift.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.191-199
• /
• 2015

We conducted this research to observe the changes of surface morphology and composition of clay minerals influenced by various concentrations of fluoric acid. Hydrofluoric acid (HA), a solution of hydrogen fluoride (HF) in water, is a colourless solution that is highly corrosive, capable of dissolving many materials, especially oxides. To do this, we treated several concentrations of HA on the ground soil samples collected from the agricultural experimental station located at Chungnam National University to observe the influence of fluoric acid on the changes of surface structures and elemental composition of clay particles. Generally, microscopic examination showed that the HA can not only attack an edge of clay particles but also start at any point where structural defects and weaknesses predisposed sites to acid. The orderly flake arrangement of clay minerals may reflect certain crystal symmetry elements. The ESEM-EDS results of element composition of clay particles influenced by HA indicated the changes of structures of clay minerals. It is also clear from the formation of etch figures and element composition of clay particles that the product layer at least partially dissolved or disintegrated in the presence of acid. Conclusively, the clay structures can be strongly influenced by concentrations of HA, resulting in changes of physical and chemical properties that can determine the behavior of solute transport as well as mobility of ions in soils.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.320-326
• /
• 2017

This study is based on the hot air welding application method of EVA sheet to test the tensile strength performance changes due to the hot air welding speed, temperature and chemical attack. For the parameters of the study, the hot air welding method that directly heats the overlap between the sheets and the adhesion surface was controlled, and the maximum temperature for application was set to $20^{\circ}C$, $0^{\circ}C$, $-5^{\circ}C$, $-10^{\circ}C$. According to the results of the testing, the tensile strength of the overlap area was the highest between the temperatures of 20 at 5~6m/min and between the low temperatures at 3~4m/min of hot air welding speed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.128-136
• /
• 2008

Recently, the unusual climate change is happening from the global warming in the whole world, the Korean peninsula is also no exception. It is predicted by many researchers that, in the near future, the Super-Typhoon of overwhelming power will occur due to rising temperatures on the sea surface around the Korean peninsula. In this study, numerical simulation has been performed with the Super-Typhoons which combined route of Typhoon Maemi with typhoon conditons of Hurricane Katrina (New Oleans in U.S.A, 2005), Typhoon Durian (philippine, 2006) and Typhoon Vera (Ise Bay in Japan, 1959) at Busan and Gyeongnam coastal area which has been badly damaged due to storm surge every year. From the numerical results, it is revealed that the storm surge heights of the Super-Typhoons are higher than that of Maemi, specially the storm surge height in the case of Katrina is about 4 times larger. So, it can be pointed out that the construction of countermeasures against disasters are very important in order to prepare against an attack of the Super-Typhoons.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.72-99
• /
• 2012

Cheomseongdae, Korea's so-called "star-gazing tower" located in the former Silla Dynasty capital of Gyeongju, is generally believed to have maintained its original shape since its construction in 647. The stone structure was closely examined and measured by Gyeongju National Museum in 1962 and reexamined by Korean National Research Institute of Cultural Heritage in 2009. This research noted the following structural anomalies of Cheomseongdae. A corner of the top rectangle layer was broken diagonally in a form that can never be attributed to a natural cause. The four metal clamps under the top rectangle layer had been missing. Four grooves, with unknown usage, exist on the sides of the long rectangular stones projected out of the circular body at the second and third circular layers from the top. On the second circular layer from the top, there are three flat stones, less than a half as tall as their surrounding stones. The average height of the third circular layer from the top is only 23.5 cm, while the overall average of the entire 27 circular layers is 29.9cm. This research postulates that all these anomalies are due to prior destructions and improper restorations of the structure. The first destruction and restoration of Cheomsengdae was likely to have occurred before the mid 15th century. The damages might include a pavilion on the top of the structure and a stone with the name of the structure carved in. The Mongolian invasion in the 13th century was a most likely cause. After the restoration, the structure suffered at least another attack. The damages on the top layer and the missing iron clamps were due to the later attack. The grooves and flat stones were to house holding device that affixed certain objects to the outer surface of the circular body. The metal or stone objects might have faced upward at the four corners of Chemseongdae, bridging the gaps between the rectangle layers and circular layers. The current Chemseongdae lost at least the four affixed objects, four holding devices, and one flat stone.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.33-46
• /
• 2020

The purpose of Electronic warfare is to disturbe, neutralize, attack, and destroy the opponent's electronic warfare weapon system or equipment. Suppression of Enemy Air Defense (SEAD) mission is aimed at incapacitating, destroying, or temporarily deteriorating air defense networks such as enemy surface-to-air missiles (SAMs), which is a representative mission supported by electronic warfare. This paper develops a simulator for analyzing the effectiveness of SEAD missions under electronic warfare support using C++ language based on the DEVS (Discrete Event Systems Specification) model, the usefulness of which has been proved through case analysis with examples. The SEAD mission of the friendly forces is carried out in parallel with SSJ (Self Screening Jamming) electronic warfare under the support of SOJ (Stand Off Jamming) electronic warfare. The mission is assumed to be done after penetrating into the enemy area and firing HARM (High Speed Anti Radiation Missile). SAM response is assumed to comply mission under the degraded performance due to the electronic interference of the friendly SSJ and SOJ. The developed simulator allows various combinations of electronic warfare equipment specifications (parameters) and operational tactics (parameters or algorithms) to be input for the purpose of analysis of the effect of these combinations on the mission effectiveness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.433-442
• /
• 2010

A control of chloride diffusion coefficient is very essential for service life of reinforced concrete (RC) structures exposed to chloride attack so that much studies have been focused on this work. The purpose of this study is to derive the intended diffusion coefficient which satisfies intended service life and propose a technique for optimum concrete mixture through genetic algorithm(GA). For this study, 30 data with mixture proportions and related diffusion coefficients are analyzed. Utilizing 27 data, fitness function for diffusion coefficient is obtained with variables of water to binder ratio(W/B), weight of cement, mineral admixture(slag, flay ash, and silica fume), sand, and coarse aggregate. 3 data are used for verification of the results from GA. Average error from fitness function is observed to 18.7% for 27 data for diffusion coefficient with 16.0% of coefficient of variance. For the verification using 3 data, a range of error for mixture proportions through GA is evaluated to 0.3~9.3% in 3 given diffusion coefficients. Assuming the durability design parameters like intended service life, cover depth, surface chloride content, and replacement ratio of mineral admixture, target diffusion coefficient, where exterior conditions like relative humidity(R.H.) and temperature, is derived and optimum design mixtures for concrete are proposed. In this paper, applicability of GA is attempted for durability mixture design and the proposed technique would be improved with enhancement of comprehensive data set including wider range of diffusion coefficients.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.894-900
• /
• 1998

An interphase between carbon fiber and epoxy matrix was introduced to increase impact strength of carbon fiber reinforced composites (CFRC) without sacrificing the interlaminar shear strength. Flexible polymers, I. e., MVEMA (poly(methyl vinyl ether-co-maleic anhydride)) and EMA(poly(ethylene-co-maleic anhydride)), which have reactive functional groups were considered as interphase materials. Weight hain of MVEMA and EMA onto the surface of carbon fibers was evaluated by changing the parameters of electrodeposition process. Electrodeposition mechanism of polymers which have anhydride functional group was identified by IR spectroscopy, that is, the generation of $RCOO^-$ functional group by the attack of hydroxide anion in the basic solution was observed. The weight gain was increased by increasing concentration of polymers, current density, and electrodeposition time. However the excess generation of oxygen gas decreased the weight gain by removing the deposited polymers. Washing in the running water easily removed the deposited polymers which are on the fiber surface without bonding, as a results, only 0.5 wt% of deposited polymers are remained.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.36-42
• /
• 2018

GGBFS(Ground Granulated Blast Furnace Slag)-replacement is very effective for improving resistance to chloride attack and this can induce a long service life for RC(Reinforced Concrete) structures exposed to chlorides. In the work, the design parameters such as cover depth, surface chloride content, critical chloride content, and replacement ratio of GGBFS are considered, and optimum replacement ratio of GGBFS are derived with intended service life. The changes of surface chloride content and cover depth show 3.16~3.38 and 3.02~3.34 times of service life variation, which are most influencing parameters. Critical chloride content shows 1.53~1.57 times of service life variation regardless of w/b(Water to Binder) ratios. In the case of surface chloride content $18.0kg/m^3$, the most severe condition, cover depth over 70 mm and GGBFS replacement ratio over 42% are required with concrete containing w/b ratio under 0.42 for 100 years of intended service life. The condition of $13.0kg/m^3$, GGBFS replacement over 35% is required. For reasonable durability design, quantitative exterior condition and critical chloride content should be determined, and the criteria in Domestic Specification is evaluated to be conservative.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.831-840
• /
• 2019

Flush Air Data Sensing system (FADS) estimates air data states using pressure data measured at the surface of flight vehicles. The FADS system does not require intrusive probes, so it is suitable for high performance aircrafts, stealth vehicles, and hypersonic flight vehicles. In this study, calibration procedures and solution algorithms of the FADS for a sphere-cone shape vehicle are presented for the prediction of air data from subsonic to supersonic flights. Five flush pressure ports are arranged on the surface of nose section in order to measure surface pressure data. The algorithm selects the concept of separation for the prediction of flow angles and the prediction of pressure related variables, and it uses the pressure model which combines the potential flow solution for a subsonic flow with the modified Newtonian flow theory for a hypersonic flow. The CFD code which solves Euler equations is developed and used for the construction of calibration pressure data in the Mach number range of 0.5~3.0. Tests are conducted with various flight conditions for flight Mach numbers in the range of 0.6~3.0 and flow angles in the range of -10°~+10°. Air data such as angle of attack, angle of sideslip, Mach number, and freestream static pressure are predicted and their accuracies are analyzed by comparing predicted data with reference data.