• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2015

Generating output characteristics of a ${\pi}$-type piezoelectric harvester depending on size of the ceramic and the elastic body were studied. The ${\pi}$-type piezoelectric harvester consists of a rectangular piezoelectric ceramic and a ${\pi}$ shaped elastic body. If the tensions is applied at both ends of an elastic body legs, the piezoelectric effect occurs at the ceramics through the form change of the elastic body. The structure of this ${\pi}$-type harvester can be used in a various area than an existing type generator, because it prevent from direct pressure to the ceramic. Generating characteristics of the harvester were analyzed by using finite element method program. The piezoelectric harvester was fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure the output characteristics. And generating characteristics were defined by comparing analysis results and experimental results. The highest output voltage was obtained when the ceramic length, thickness were 20 mm, 0.5 mm in the analysis result. And experiment was performed by analysis results at low frequency region, output voltage was generated about 6 V.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.650-661
• /
• 2005

Statement of problem: It could be hypothesised that attachments, which provide more retention against vortical and horizontal dislodgement, will be associated with more favorable parameters of oral function. Purpose: This study was to provide data of initial retentive force and retention loss of different bar attachment systems recommended for use with maxillary implant overdentures. Material and method: 4 implants were placed in the anterior region of edentulous maxilla, five different systems of bar attachment were fabricated as follows: cantilevered Hader bar using clips (Type 1), Hader bar using clips without cantilever (Type 2), Hader bar using clip and ERA attachment orange male (Type 3), Hader bar using clip and ERA attachment white male (Type 4), and Bar using magnets (Type 5). Each samples were placed in the universal testing machine for determination of retentive forces(at initial and after every 200 cycles up to 1,000 cycles). Results and Conclusion 1. Attachment type 1 showed the biggest initial retentive force followed by type 3, type 2, type 4, and lastly type 5(P<0.001). 2. After 1,000 cycles of repeated removals of attachments, significant loss of retentive forces was taken place except for attachment type 5. 3. After 1,000 cycles of repeated removals, the loss of retentive force between type 1 and type 2, which used Hader bar and clip attachments. was greater in type 1 that had wider clip formation. And between type 3 and type 4, which used ERA attachments, the loss of retentive force was greater in type 4 that had white male attached (P<0.001). 4. After 1.000 cycles of repeated removals, attachment type 3 showed the biggest retentive force followed by type 2, type 4, type 1 and lastly type. 5. There was no significant difference between attachment type 3 and 4, and type 4 and 1(P<0.001).

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.243-246
• /
• 2006

현재의 많은 유도무기들은 발사관에 장착되어 보관 및 이동되다가 필요시 발사된다. 발사관이란 유도탄 즉 미사일등이 외부환경에 노출되지 않도록 유도탄을 둘러싸고 있는 일종의 케이스이며 또한 유도탄 발사시 가이드 역할을 동시에 수행한다. 유도탄과 발사관을 연결하는 방법으로 흔히 사용되는 것으로 탄고정장치를 사용하는데 대표적인 파이로 부품이 폭발볼트이다. 폭발볼트는 화약의 폭발력에 의해 볼트몸체가 이등분됨으로써 볼트에 의해 결합되고 있던 부분이 분리된다. 하지만 기존의 폭발볼트는 분리시 파편, 화염 및 pyre-shock이라는 악작용을 수반하므로 사용상 제한을 가지고 있다. 이와 같은 문제점을 해결하기 위하여 ball을 이용한 결합 분리장치 즉 ball type 분리볼트를 개발하게 되었다. 기존의 폭발볼트가 가졌던 기계적 우수성은 물론 분리시 파편, 화염 및 pyre-shock이 발생되지 않는 장점을 가지고 있는 것으로 판단된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.179-182
• /
• 2008

현재의 많은 유도무기들은 발사관에 장착되어 보관 및 이동되다가 필요시 발사된다. 발사관이란 유도탄 즉 미사일등이 외부환경에 노출되지 않도록 유도탄을 둘러싸고 있는 일종의 케이스이며 또한 유도탄 발사시 가이드 역할을 동시에 수행한다. 유도탄과 발사관을 연결하는 방법으로 흔히 사용되는 것으로 탄고정장치를 사용하는데 대표적인 파이로 부품이 폭발볼트이다. 폭발볼트는 화약의 폭발력에 의해 볼트몸체가 이등분됨으로써 볼트에 의해 결합되고 있던 부분이 분리된다. 하지만 기존의 폭발볼트는 분리시 파편, 화염 및 pyro-shock이라는 악작용을 수반하므로 사용상 제한을 가지고 있다. 이와 같은 문제점을 해결하기 위하여 ball을 이용한 결합 분리장치 즉 ball type 분리볼트를 개발하게 되었다. 기존의 폭발볼트가 가졌던 기계적 우수성은 물론 분리시 파편, 화염 및 pyro-shock이 발생되지 않는 장점을 가지고 있는 것으로 판단된다.

• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.87-97
• /
• 2020

The livestock infections had been happened seasonally, but they have gradually changed to be irrelevant to seasons and have an aspect to rapidly spread after outbreak. Especially in Korea, proactive disinfection measures are very important because the livestock farms are located densely so high as to accelerate the spread of disease between farms. livestock disease outbreaks like HPAI and FMD occurred with high probability due to vehicles visiting the farms, this study is to evaluate the efficiency of livestock vehicle disinfection systems by investigating the disinfectant coverage according to the type of vehicle disinfection system and the type of vehicle quantitatively. In field experiments, water-sensitive papers (WSPs) were attached to 21 locations on the surface of four vehicles (sedan, SUV, truck, and feed transport), respectively, and exposed to disinfectants while the vehicle was sprayed in two vehicle disinfection systems (tunnel type and simplified type). The WSPs were scanned and image-processed to calculate the disinfectant coverage. The results showed that the tunnel-type vehicle disinfection system had a better disinfection performance with an average coverage of 90.27% for all vehicles compared to 32.62% of the simplified type system. The problem of the simplified system was a wide coefficient of variation (1.05-1.31) of the disinfectant coverage between 21 locations indicating a need for further improvement of nozzle location and arrangement.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.41-49
• /
• 1999

초고속선의 추진기로 새로이 주목받고 있는 공기유입 물제트 추진기에 대한 타당성을 검토하였다. 본 추진기는 벤틸레이션 상태에서 작동되므로 완전캐비테이션 단면을 사용하여 로터를 설계하였다. 즉 쐐기형(wedge type) 단면과 캐비테이터형(cavitator type) 단면을 갖는 로터 2종류를 설계 제작하여 모형시험을 수행하였다. 로터는 일반적으로 덕트-프로펠러에서 채택하고 있는 Kaplan형 프로펠러 형상을 선택하였다. 캐비테이션 터널 시험부를 개조하여 공기유입 물제트 추진기의 단독특성시험을 수행하였으며, 레이져 유속계를 이용하여 노즐 내부 속도를 엄밀하게 계측하였다. 단독특성 시험은 개조된 캐비테이션 터널의 시험부에서 수행되었으며 완전침수(fully-submerged)상태와 자유분출(free-jet)상태에서 수행되었다. 자유분출상태에서는 후류공기가 유입되어 벤틸레이션 현상이 발생하였으며, 특히 캐비테이터형 단면을 갖는 KP447 로터의 경우 낮은 전진계수에서 작동시킬 경우 완전캐비테이션이 발생하여 성능특성이 크게 변화하였다. 날개 압력면의 뒷날 부근에 높이가 다른 띠를 각각 부착시켜 양력 증가장치로 사용하였으며 이에 의한 추력과 토오크 변화를 계측하였다.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.470-475
• /
• 2017

Since the intake air of gas turbine engine of marine purpose contains water particles, inertial separator for separating the air and water particles are provided. Saw type and wave type separator are now used to separate inflow water particle from the gas. In this paper, the design parameters of saw type separator are studied by numerical simulations. Using the commercial CFD program, Star-CCM+, Lagrangian-Eulerian method was used to perform the analysis of two phase flow of the mist in the air. This method solves Reynolds-Averaged Navier-Stokes equations in Eulerian framework for the continuous phase, while solves equation of motion for individual particles in Lagrangian framework. Lagrangian multiphase method was applied to monitor the particles of different sizes and shapes and to verify collision between particles by chasing particles. Water particles were injected through injectors located at the inlet of the separator and escape mode was used which assumes that the particles attached on the surface of inertial separator were removed from the simulation, effectively escaping the solution domain. Through the numerical computations with the inlet condition of constant water particle size in the wetness fraction of 85%, efficiency of eliminating the water particle and the pressure drop between the inlet and outlet were examined.

• Fashion, Industry and Education
• /
• 제14권2호
• /
• pp.1-10
• /
• 2016

In the present study, the materials, sizes, and designs of blind eye patch products of skin-adhesive type and glass-attachment type currently available in the market will be analyzed and ergonomically appropriate blind eye patches will be developed. Although these skin-adhesive type eye patches were easy to use, they had shortcomings such as skin troubles due to the adhesive used on the weak and sensitive skin of children and the fact that eyebrows are pulled out and the skin is irritated when the eye patches are detached after being attached. The non-adhesive type eye patches were blind patches to be worn by putting into glasses. These products were made using diverse materials such as neoprene, non-woven fabrics, and felt and showed differences in tactile impressions and irritation to the skin depending on material characteristics. In addition, most products were efficient in blocking light with three-dimensional oval designs comprising darts. In the present study, blind eye patches were designed to reduce skin troubles by using sweat-absorbing and quick-drying functional materials with soft tactile impressions. In addition, to increase the effect to block light and the degree of tight contact with the skin when the blind eye patches are worn compared to existing eye patch designs, the sides of the wings of the blind eye patches were widened, glass frame fixing plates were added, and the darts were made to be curved thereby making an ergonomic design reflecting the shape of the face. The non-adhesive type blind eye patches developed in the present study are considered to enhance the wearing sensation with the use of the material without skin irritation but with cushioning feelings and the ergonomic design reflecting the contour of the face.