• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.134-142
• /
• 2005

The experimental setups for flow visualization and processes identification in laboratory scale (so cal led Flow Lab.) has developed to get ideas and answer fundamental questions of flow and migration in geologic media. The setup was made of a granite block of $50{\times}50cm$ scale and a transparent acrylate plate. The tracers used in this experiments were tritiated water, anions, and sorbing cations as well as an organic dye, eosine, to visualize migration paths. The migration plumes were taken with a digital camera as a function of time and stored as digital images. A migration model was also developed to describe and identify the transport processes. Computer simulation was carried out not only for the hydraulic behavior such as distributions of pressure and flow vectors in the fracture but also for the migration plume and the elution curves.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.284-292
• /
• 1977

Epoxy-methacrylate prepolymer was synthesized from methacrylic acid and a diglycidyl ether type low molecular weight epoxy resin, and the electron beam curing of the prepolymer was studied using styrene and polyethyleneglycol dimethacrylates as comonomers. The esterification was carried out quantitatively without any side reaction adding more than 250∼300ppm hydroquinone and less than $1{\%}$ (wt) triethanolamine by wt. of methacrylate acid, respectively. In the radiation curing under air atmosphere, the maximum gel fraction was observed at 10∼$30{\%}$ monomer contents. The rate of gel formation was decreased by the presence of unreacted epoxy group and acid in the prepolymer and increased with increasing degree of polymerization of polyethyleneglycol block in the dimethacrylates. Considerable oxygen effect in the curing, particularly when polyethyleneglycol dimethacrylate was used as a comonomer, was recognized through the differences of the product properties, though no remarkable differences were found in the rate of gel formation in air and nitrogen atmosphere.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.231-238
• /
• 2005

On the basis of flow resistance theory the conceptual model and related mathematical descriptions is proposed for resistance modeling of groundwater flow in CPM(continuum Porous medium), DFN(discrete fracture network) and fractured-porous medium. The proposed model is developed on the basis of finite volume method assuming steady-state, constant density groundwater flow. The basic approach of the method is to evaluate inter-block flow resistance values for a staggered grid arrangement, i.e. fluxes are stored at cell walls and scalars at cell centers. The balance of forces, i.e. the Darcy law, is utilized for each control volume centered around the point where the velocity component is stored. The transmissivity (or permeability) at the interface is assumed to be the harmonic average of neighboring blocks. Flow resistance theory was utilized to relate the fluxes between the grid blocks with residual pressures. The flow within porous medium is described by three dimensional equations and that within an individual fracture is described by a two dimensional equivalent of the flow equations for a porous medium. Newly proposed models would contribute to develop flow simulation techniques with various matrix characteristics.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.955-960
• /
• 2008

We investigated and estimated at the characteristics of decomposition and mineralization of benomyl using a design of experiment(DOE) based on the general factorial design in an E-beam process, and also the main factors(variables) with benomyl concentration(X$_1$) and E-beam irradiation(X$_2$) which consisted of 5 levels in each factor was set up to estimate the prediction model and the optimization conditions. At frist, the benomyl in all treatment combinations except 17 and 18 trials was almost degraded and the difference in the decomposition of benomyl in the 3 blocks was not significant(p > 0.05, one-way ANOVA). However, the % of benomyl mineralization was 46%(block 1), 36.7%(block 2) and 22%(block 3) and showed the significant difference of the % that between each block(p < 0.05). The linear regression equations of benomyl mineralization in each block were also estimated as followed; block 1(Y$_1$ = 0.024X$_1$ + 34.1(R$^2$ = 0.929)), block 2(Y$_2$ = 0.026X$_2$ + 23.1(R$^2$ = 0.976)) and block 3(Y$_3$ = 0.034X$_3$ + 6.2(R$^2$ = 0.98)). The normality of benomyl mineralization obtained from Anderson-Darling test in all treatment conditions was satisfied(p > 0.05). The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were Y = 39.96 - 9.36X$_1$ + 0.03X$_2$ - 10.67X$_1{^2}$ - 0.001X$_2{^2}$ + 0.011X$_1$X$_2$(R$^2$ = 96.3%, Adjusted R$^2$ = 94.8%) and 57.3% at 0.55 mg/L and 950 Gy, respectively. A Microtox test using V. fischeri showed that the toxicity, expressed as the inhibition(%), was reduced almost completely after an E-beam irradiation, whereas the inhibition(%) for 0.5 mg/L, 1 mg/L and 1.5 mg/L was 10.25%, 20.14% and 26.2% in the initial reactions in the absence of an E-beam illumination.

• International Journal of Contents
• /
• v.2 no.4
• /
• pp.25-30
• /
• 2006

The mutual exclusion (MX) paradigm can be used as a building block in many practical problems such as group communication, atomic commitment and replicated data management where the exclusive use of an object might be useful. The problem has been widely studied in the research community since one reason for this wide interest is that many distributed protocols need a mutual exclusion protocol. However, despite its usefulness, to our knowledge there is no work that has been devoted to this problem in a mobile computing environment. In this paper, we describe a solution to the mutual exclusion problem from mobile computing systems. This solution is based on the token-based mutual exclusion algorithm.

• Journal of Magnetics
• /
• v.13 no.2
• /
• pp.53-56
• /
• 2008

This study proposes a simple nano-patterning process for the fabrication of magnetic nanodot arrays on a large area substrate. Ni nanodots were fabricated on a large area (4 inches in diameter) Si substrate using the soft lithographic technique using self-assembled surface micelles of Polystyrene-block-Poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer formed at the air/water interface as a mask. The hexagonal array of micelles was successfully transferred to a Ni thin film on a Si substrate using the Langmuir-Blodgett technique. After ion-mill dry etching, a magnetic Ni nanodot array with a regular hexagon array structure was obtained. The Ni nanodot array showed in-plane easy axis magnetization and typical soft magnetic properties.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1792-1797
• /
• 2020

The shielding characteristics of two concrete blocks, widely used in the building industry in Mexico have been determined. These characteristics include the mass interaction coefficients, the linear attenuation coefficients and the half-value layers. The energy-dispersed X-ray fluorescence shows that the percentage mass content of each atom in the sample, and the atomic volume of the constituent elements of a material, plays an important role in its shielding capabilities. The total linear attenuation coefficients and the half-value layers were analyzed for a set of photon energies related to X-rays for diagnosis and cancer treatment with linear accelerators. Our results show that the concrete blocks have similar photon attenuation coefficients than the Portland concrete and better features than gypsum.

• Nuclear industry
• /
• v.29 no.7
• /
• pp.58-60
• /
• 2009

시험 검사 인증 기술 컨설팅 분야의 세계적인 서비스 기업인 T$\ddot{U}$V S$\ddot{U}$D 그룹의 한국 법인인 T$\ddot{U}$V S$\ddot{U}$D Korea가 최근 원자력 기기 및 시스템 설계 엔지니어링 기업인 (주)GNEC를 인수, 합병하면서 국내 원자력 시장에 성큼 진출하는 한편 우리나라 원자력사업의 해외 시장 진출을 적극적으로 도울 계획을 세우고 있다. 라이너 블록 사장은 GNEC 인수 후 기자회견을 통해 "원자력 기기 및 설계, 교육 및 엔지니어링 서비스 등 관련 기술 지원에 앞장서 국내 에너지 산업의 활성화에 앞장서는 것을 물론 국내 원자력 산업의 해외 진출을 지원하면서 중국, 인도 및 중국 등 아시아 시장에 적극 진출할 것" 이라고 말하고 "원전 관련 기술을 갖고 있는 다른 기업에 대해서도 향후 인수 합병(M&A)에 나설 계획"이라고 밝혔다. T$\ddot{U}$V S$\ddot{U}$D Korea가 GNEC 인수를 마무리한 시점인 지난 10월 19일, 한강이 내려다보이는 여의도 대한생명 63빌딩 12층 T$\ddot{U}$V S$\ddot{U}$D Korea 사장실에서 라이너 블록 사장을 만났다. 인터뷰 자리에는 이번 GNEC 합병에 큰 역할을 한 김두일 T$\ddot{U}$V S$\ddot{U}$D 고문이 배석하여 인터뷰를 도왔다.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

본 논문에서는 프랙탈 영상압축에서 화질/압축률을 향상 시키면서 압축시간을 획기적으로 향상시키는 방법을 제안한다. 본 방법은 레인지블록의 크기가 아주 작으면 유사변환 계수들의 값을 극히 제한하더라도 유사한 도메인블록을 아주 가까운 주변에서 쉽게 찾을 수 있음을 활용하여 압축시간을 단축시키고 화질/압축률을 향상 시킨다. 또한, 본 방법은 인접한 레인지블록 들의 압축에 사용되는 계수들이 좋은 상호관계를 가지도록 유도하여 화질/압축률을 더욱 향상 시킨다. 본 방법은 대부분의 프랙탈 영상압축 방법에 쉽게 적용되어 그 성능을 향상시킬 수 있다. 특히 압축시간이 전역탐색 방법에 비해서 $512{\times}512$ 영상에서 약 60000 배 $256{\times}256$ 영상에서 약 15000 배 빠르며 실시간 동영상의 I-frame에도 사용가능 하다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.362-362
• /
• 2010

Today, vast attention has been paid to periodic arrays of nanostructures due to their potential for applications such as memory with huge storage density. Such application requires large-scale fabrication of well ordered nano-sized structures. One of the most widely used methods for the ordered nanostructures is lithography. This top-down process, however, has the limit to reduce size. Here the promising alternative is the self-organization of ordered nano-sized structures such as large scale 2d carbon-induced reconstructions on W(110). In the present study, we report on the first well-resolved atomic resolution STM studies of the well-known R($15{\times}3$) and R($15{\times}12$) carbon induced reconstruction of the W(110). From the atomic image of R($15{\times}3$) for different values of tunneling gap resistance, we can tell there are no missing atoms in unit cells of R($15{\times}3$) and some atomic displacements are substantial from the clean W(110), even though not all the imaged position of atoms correspond to tungsten, but may include those of carbon. We are considering two cases; First case is related to lattice deformation, or top layer of W(110) is deformed in the process of relief of strain caused by random inserting of carbon atoms possibly in the interstitial position. In the second case, R($15{\times}3$) unit cell results from a coincidence lattice between clean W(110) substrate and tungsten carbide overlayer which has rectangular atomic arrangement and giving R($15{\times}3$) coincidence lattice. beta-W2C showing rectangular unit cell should be a candidate. Further, we report on new reconstructions. Unlike the well-known R($15{\times}12$) consisting of two parts, two inner structures between two "Backbone" structures. The new reconstruction, which we found for the first time, contains more parts between the "Backbone"s. Sometimes we can observe the reconstruction consists of only inner parts without "Backbone" parts. Thus, the observed reconstruction can be built by constructing of two types of "Lego"-like block. Moreover, the rectangle shape of "Backbone" transform to parallelogram-like shape over time, the so-called wavy-R($15{\times}12$). Adsorption of hydrogen can be the reason for this transformation.