• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.373-387
• /
• 2011

In this study, four types of sensitivity experiments (EG, EE, NG, NE; E: ERA-Interim, N: NCEP/DOE2, G: Grell scheme, E: Emanuel scheme) were performed to evaluate the simulation skills of RegCM4 released in July 2010 over the CORDEX (COordinated Regional Downscaling EXperiment) East Asia domain based on the combinations of boundary conditions (BC: ERA-Interim, NCEP/DOE2) and the cumulus parameterization schemes (CPS: Grell, Emanuel) for the 1989. The surface air temperature and precipitation data observed by the Korea Meteorological Adminstration were used to validate the simulation results over South Korea. The RegCM4 well simulates the seasonal and spatial variations of temperature but it fails to capture the seasonal and spatial variations of precipitation without consideration of the BC and CPS. Especially the simulated summer precipitation amount is significantly less in EG, NG, and NE experiments. But the seasonal variation of precipitation including summer precipitation is relatively well simulated in the EE experiment. The EE experiment shows a better skill in the seasonal march of East Asia summer monsoon, distribution of precipitation intensity and frequency than other experiments. In general, the skills of RegCM4 for temperature and precipitation are better during winter than summer, and in Emanuel than Grell schemes. The simulation results are more impacted by cumulus parameterization schemes than boundary conditions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.1
• /
• pp.31-44
• /
• 2017

The aim of this study is to evaluate the accuracy and variability of the oak pollen concentrations over the Seoul metropolitan region (SMR) simulated by the Community Multiscale Air Quality (CMAQ)-based pollen dispersion model, which is the CMAQ-pollen model integrated with the improved oak pollen emission model(PEM-oak). The PEM-oak model developed is based on hourly emission flux parameterization that includes the effects of plant-specific release, meteorological adjustment, and diurnal variations of oak pollen concentrations. A 33 day-run for oak pollen simulation was conducted by the CMAQ-pollen model with a 3 km spatial resolution for the SMR during the 2014 spring pollen season. Modeled concentrations were evaluated against the hourly measurements at three Burkard sampling sites. Temporal variations of oak concentrations were largely well represented by the model, but the quantitative difference between simulations and measurements was found to be significant in some periods. The model results also showed that large variations in oak pollen concentrations existed in time and space and high concentrations in the SMR were closely associated with the regional transport under strong wind condition. This study showed the effective application of the CMAQ-pollen modeling system to simulate oak pollen concentration in the SMR. Our results could be helpful in providing information on allergenic pollen exposure. Further efforts are needed to further understand the oak pollen release characteristics such as interannual variation of the oak pollen productivity and its spatio-temporal flowering timing.

• Journal of Adhesion and Interface
• /
• v.6 no.3
• /
• pp.1-9
• /
• 2005

This study investigated the influence of atmospheric plasma factors such as RF power, treatment time, the gap distance between discharge and sample, and the gas flow rate of Ar on the surface property by using the design of experiment (DOE) method. The plasma treatment time (s), plasma power (W), gap distance (mm) between discharge and sample, and flow rate of Ar gas were in order of important factors for changing the surface free energy of PMMA plates. As a result, the most effective factor for improving the surface free energy of PMMA plates is the distance (mm) from discharge glow to sample plate. Because of the interaction between plasma power (W) and treatment time (s), the power dose (J) factor which multiply plasma power (W) by treatment time (s) should be significantly considered. The optimum condition for maximizing the surface free energy of PMMA plate was found at 1500J of power dose. Through XPS and AFM analysis, we also observed the change of chemical composition, surface morphology and roughness before and after plasma treatment. It is considered that the change of surface free energy of PMMA plate with plasma treatment is influenced by the introduction of polar functional group as well as the increase of surface roughness.

• Atmosphere
• /
• v.26 no.1
• /
• pp.19-33
• /
• 2016

Water vapor in the atmosphere is an important element that generates various meteorological phenomena and modifies a hydrological cycle. In general, the Yeongdong region has a lot of snow compared to the other regions in winter due to the complex topography and an adjacent East Sea. However, the phase change from water vapor to ice cloud and further snowfall has little been examined in detail. Therefore, in this study, we investigated phase change of liquid water in terms of a quantitative budget as well as time lag of water vapor conversion to snowfall in the ESSAY (Experiment on Snow Storms At Yeongdong) campaign that had been carried out from 2012 to 2015. First, we classified 3 distinctive synoptic patterns such as Low Crossing, Low Passing, and Stagnation. In general, the amount of water vapor of Low Crossing is highest, and Low Passing, Stagnation in order. The snowfall intensity of Stagnation is highest, whereas that of Low Crossing is the lowest, when a sharp increase in water vapor and accordingly a following increase in precipitation are shown with the remarkable time lag. Interestingly, the conversion rate of water vapor to snowfall seems to be higher (about 10%) in case of the Stagnation type in comparison with the other types at Bukgangneung, which appears to be attributable to significant cooling caused by cold surge in the lower atmosphere. Although the snowfall is generally preceded by an increase in water vapor, its amount converted into the snowfall is also controlled by the atmosphere condition such as temperature, super-saturation, etc. These results would be a fundamental resource for an improvement of snowfall forecast in the Yeongdong region and the successful experiment of weather modification in the near future.

• Journal of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.543-548
• /
• 2008

Solid hydrated by hydro-thermal synthesis reaction is cured two times, the first curing is the steam curing at atmospheric pressure and the second one is a high-pressure steam curing, that is autoclaving. Steam curing is to acquire the proper strength for the resistance of treatment in the first curing process, it was not evaluated properly so far. Because of ignorance about curing, some engineers even think that the dry curing is better than the steam curing. The relation between compressive strength of solid hydrated by hydrothermal synthesis reaction and curing condition are presented in this paper. In order to investigate the effect of curing on the strength properties of specimen, the hydration behavior of solid hydrated by hydro-thermal synthesis reaction has been studied over curing condition using XRD, DT-TGA and porosimeter, SEM analysis technique. The results show that the specimens which are cured with blended method of dry and steam curing appear to have better strength properties than that of dry curing and steam curing. Also, there are significant difference of hydration behavior among curing condition in the solid hydrated by hydro-thermal synthesis reaction.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.181-191
• /
• 2020

In order to produce accurate initial condition of soil moisture for global Numerical Weather Prediction (NWP), spin-up experiment is carried out using Noah Land Surface Model (LSM). The model is run repeatedly through 10 years, under the atmospheric forcing condition of 2008-2017 until climatological land surface state is achieved. Spin-up time for the equilibrium condition of soil moisture exhibited large variability across Koppen-Geiger climate classification zone and soil layer. Top soil layer took the longgest time to equilibrate in polar region. From the second layer to the fourth layer, arid region equilibrated slower (7 years) than other regions. This result means that LSM reached to equilibrium condition within 10 year loop. Also, spin-up time indicated inverse correlation with near surface temperature and precipitation amount. Initialized from the equilibrium state, LSM was spun up to obtain land surface state in 2018. After 6 months from restarted run, LSM simulates soil moisture, skin temperature and evaportranspiration being similar land surface state in 2018. Based on the results, proposed LSM spin-up system could be used to produce proper initial soil moisture condition despite updates of physics or ancillaries for LSM coupled with NWP.

• Journal of the Korean earth science society
• /
• v.29 no.2
• /
• pp.128-139
• /
• 2008

Intercomparison among the three radiative transfer models (RTMs) which have been used in the studies for COMS, was carried out on the condition of aerosol-laden atmospheres. Also the role of aerosols in the atmospheric radiation budget was analyzed. The results (hereafter referred to as H15) from Halthore et al.'s study (2005) were used as a benchmark to examine the models. Aerosol Radiative Forcing (ARF) values from the three RTMs, calculated under two conditions of Aerosol Optical Thickness (AOT=0.08, 0.24), were systematically underestimated in comparison to H15 in the following shortwave components; 1) direct and diffuse irradiance at the surface, 2) diffuse upward fluxes at the surface and the top of the atmosphere, and 3) atmospheric absorbance. The ARF values for the direct and diffuse fluxes at the surface was $-10{\sim}-40Wm^{-2}$. The diffuse upward values became larger with increasing both AOT and Solar Zenith Angle (SZA). Diffuse upward/downward fluxes at the surface were more sensitive to the SZA than to the atmospheric type. The diffuse downward values increased with increasing AOT and decreasing SZA. The larger AOT led to surface cooling by exceeding the reduction of direct irradiance over the enhancement of diffuse one at the surface. The extinction of direct solar irradiance was due mainly to water vapor in tropical atmospheres, and to both ozone and water vapor in subarctic atmospheres. The effect of water vapor in the tropics was $3{\sim}4$ times larger than that of the ozone. The absorbance values from the three RTMs agree with those from H15 within ${\pm}10%$.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.89-99
• /
• 1987

The changes of lipid components in apple peels which effects physiological characteristic in apple storage, and pigment which is important base in quality, were investigated in terms of temperature and pressure. The results obtained were as follows ; The contents of total lipid of Ralls which is resistant to cold temperature were higher than those of Fuji. The contents of total lipid of Fuji and Ralls were decreased up to about 60 days and then increased up to the final stage of storage. Especially, the increasing rate at low temperature storage was greater than at normal temperature storage. In the case of Fuji, the contents of neutral lipid of normal temperature were increased up to 90 days, while those of low temperature were decreased up to 60 days and then increased up to 90 days. The contents of glycolipid, in both Fuji and Ralls were decreased up to about 30 days and then increased up to about 60 days and the decreased up to 90 days. The contents of phospholipid in Fuji were decreased during storage, while those in Ralls were appeared very slight changes. The ratios of unsaturated fatty acid to saturated fatty acids in neutral lipid of Fuji were decreased during storage, but those of Ralls were increased. Those of glycolipid of Fuji were decreased up to 60 days and then increased up to 90 days, while those in Ralls were increased during storage. In both Fuji and Ralls, those of phospholipid increased during storage and were high in order of sub-atmospheric pressure at $1^{\circ}C$ (SAP-L), normal atmospheric pressure at $1^{\circ}C$ (NAP-L), sub-atmospheric pressure at $20^{\circ}C$ (SAP-N) and normal atmospheric pressure at $20^{\circ}C$(NAP-N) for storage condition. The contents of chlorophyll of Ralls were higher than those of Fuji and the decreasing rate was the lowest in SAP-L. The changes of carotenoid and anthocyanin contents were the greatest increasing at NAP-N and colouring was delayed at SAP-L.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.95-104
• /
• 2019

Smoke generated in a fire consists of gaseous substances and particulate matter, such as unburned carbon that adsorbed the gases. Human injury caused by inhalation of gaseous substances present in smoke is mostly short-term, whereas damage caused by inhalation of particulate matter is relatively a long-term phenomenon depending on the state of the gas-phase adsorption. The amount and location of the deposited smoke particles are important factors in estimating the damage caused to humans, which are affected by the breathing conditions as well as particle conditions, such as the size and concentration affected by the combustion conditions. In this study, in order to understand the characteristics of the deposition of smoke particles in the respiratory tract related to the study of human smoke inhalation injury, the number and mass concentration of smoke particles deposited in different areas of the respiratory tract for different fuel types, combustion conditions and breathing conditions were calculated. In addition, the amount of mass deposition of smoke in the respiratory tract for a certain period of inhalation was compared with the atmospheric standard of fine dust.

• Spatial Information Research
• /
• v.13 no.3 s.34
• /
• pp.323-333
• /
• 2005

This paper shows disposal site about an airport using ICAO(International Civil Aviation Organization)and GIS(Geographic Information System). In Korea, mountains occupy above $70\%$ of the whole country centering around Baek-Du mountain range and a physical distribution system doesn't go on smoothly between east and west region. At present, disposal site about an airport follows the standard of ICAO and FAA(Federal Aviation Administration). So, it's desperately necessary to make the new standard suitable for the condition of Korea. This study analyzes major customers in the aerospace and transportation sector by considering the present condition of location of geography, atmospheric phenomena, population and transportation about Ul-Jin airport on the standard of ICAO and FAA. As the results, Gi-Sung site proposed for the airport using the existing a runway in air force has a locality road connecting a fishing and agrarian villages and is shown better than the others.