• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2661-2663
• /
• 2005

To construct the stable back-up system between mini-hubs, we propose the plan of site diversity of asynchronous mini-hub by monitoring outlink carriers and error data. In this paper, we made hardware and software to control mini-hub system for site diversity back-up by switching SDBS equipment through communication between master mini-hub and slave mini-hub.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.883-886
• /
• 1998

We introduce a high level synthesis methodlogoy for automatic synthesis of asynchronous circuits form a language based on CSP. The input language is a high level concurrent algorithmic specification that can model complex concurrent control flow, logical and arithmetic computation and communications between them. This specification is translated into petri net which has actions. These actions are refined to synthesize the controllers and to allocate the data resources. We use the automatic synthesis through signal transition graphs (STGs) that allows to take advantage of logic synthsis methods to optimize the circuit.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.733-736
• /
• 1999

In this Paper, Bit selectable and Bi-directional Interface Port is described, which can communicate data with the peripheral devices. Specially A description of the asynchronous design method is given to remove the clock skew phenomenon and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.5㎱.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.567-572
• /
• 2016

N-screen is an emerging technology to support multimedia multicasting, content sharing and content mobility. N-screen service providers should obtain the technology that provides the highest quality content seamlessly. Distributed nature of WiMedia distributed-MAC protocol can provide full mobility support, and achieves seamless medium access method in contrast to IEEE 802.15.3. So, in this paper, WiMedia distributed-MAC protocol is adopted and an asynchronous multicast transmission (AMT) technology is proposed to enhance performance of seamless N-screen wireless service based on distributed-MAC. The ACK frame transmissions are not required for multicast transmissions. By using this property in AMT, if a device is a multicast receiver, its reserved time slots can be reserved by the other devices with 1-hop distance. Furthermore, each N-screen device broadcasts and shares the information including an order in asynchronous traffic reservations to reduce conflicts in determining the transmission order of asynchronous N-screen packets. Therefore, AMT scheme expands the number of time slots available and throughputs for multicast and asynchronous traffic reservations when comparing with the distributed-MAC standard system. N-screen communications based on distributed-MAC with the proposed AMT shows a new framework for realizing N-screen wireless service with the full content mobility.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.253-261
• /
• 2013

In this paper, we study the problem of controlling composite asynchronous sequential machines. The considered asynchronous machine consists of two input/state machines in cascade connection, where the output of the front machine is delivered to the input channel of the rear machine. The objective is to design a corrective controller realizing model matching such that the stable state behavior of the closed-loop system matches that of a reference model. Since the controller receives the state feedback of the rear machine only, there exists uncertainty about the present state of the front machine. We specify the existence condition for a corrective controller given the uncertainty. The design procedure for the proposed controller is described in a case study.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.108-113
• /
• 2013

This paper describes a low power asynchronous successive approximation register (SAR) type 12b analog-to-digital converter (ADC) for biomedical applications in a 0.35 ${\mu}m$ CMOS technology. The digital-to-analog converter (DAC) uses a capacitive split-arrays consisting of 6-b main array, an attenuation capacitor C and a 5-b sub array for low power consumption and small die area. Moreover, splitting the MSB capacitor into sub-capacitors and an asynchronous SAR reduce power consumption. The measurement results show that the proposed ADC achieved the SNDR of 68.32 dB, the SFDR of 79 dB, and the ENOB (effective number of bits) of 11.05 bits. The measured INL and DNL were 1.9LSB and 1.5LSB, respectively. The power consumption including all the digital circuits is 6.7 ${\mu}W$ at the sampling frequency of 100 KHz under 3.3 V supply voltage and the FoM (figure of merit) is 49 fJ/conversion-step.

• The Journal of Engineering Research
• /
• v.1 no.1
• /
• pp.41-48
• /
• 1997

In this paper, we wxtend DMSA system to support multimedia traffic more efficiently by incorporating a priority scheme. we divide network stations into two types: asynchronous and isosynchronous stations, and we give a priority to the isosynchronous stations over the asynchronous stations by imposing a time-out constraint on the asynchronous stations . we derive the maximum number of isosynchronous stations the proposed priority scheme can support simultaneously and the maximum bandwidth that can be utilized by asynchronous stations in the presence of isosynchronous traffic. We also provide simulation results for the mixed voice and data traffic, and compare them to the analytic results.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.874-883
• /
• 2009

This paper deals with an integrated voltage and frequency (VF) controller for isolated asynchronous generators (IAG) driven by a constant power pico-hydro uncontrolled turbine feeding three-phase four-wire loads. The proposed VF controller is used to control the frequency and voltage of an IAG with load leveling. Such a VF controller is also known as an integrated electronic load controller (IELC) which is realized using an isolated star/polygon transformer with a voltage source converter (VSC) and a battery at its DC bus. The proposed generating system with a VFC is modeled and simulated in MATLAB along with Simulink and Simpower system (SPS) toolboxes. The simulated results are presented to demonstrate the performance of an isolated asynchronous generator feeding three-phase four-wire loads with neutral current compensation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.61-68
• /
• 2007

In a naval combat system, the information processing node is a key functional equipment and performs major combat management functions including control sensor and weapon systems. Therefore, a failure of one of the node causes fatal impacts on overall combat system capability. There were many methodologies to enhance system availability by reducing the impact of system failure like a fault tolerant method. This paper proposes a fault tolerant mechanism for information processing node using a replication algorithm with hardware duplication. The mechanism is designed as a generic algorithm and does not require any special hardware. Therefore all applications in combat system can use this functionality. The asynchronous characteristic of this mechanism provides the capability to adapt this algorithm to the module which has low performance hardware.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.43-50
• /
• 2009

This paper deals with a novel solid state controller (NSSC) for an isolated asynchronous generator (IAG) feeding 3-phase 4-wire loads driven by constant power prime movers, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of the asynchronous generator. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 2-leg voltage source converters (CC- VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The neutral point of the load is created using aT-configuration of the transformers. The IAG system is modeled in MATLAB along with Simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of the isolated generating system consisting of NSSC and IAG driven by uncontrolled pico hydro turbine and feeding 3-phase 4-wire loads.