• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1480-1489
• /
• 1996

In ATM networks there are two methods in traffic control as schemes advancing the quality of service. One is reactive control after congestion and the other which is generally recommended, is preventive control before congestion, including connection admission control on call leel and usage parameter control, network parameter control, priority control and congestion control on cell level. In particular, usage parameter control is required for restricting the peak cell rate of bursy tracffic to the parameter negotiated at call set-up phase since the peak cell rate significantly influences the network quality of service. The scheme for progressing quality of service by usage parameter control is themethod using VSA(Virtual Scheduling Algorlithm) recommended ITU-T. The method using VSSA(Virtual Scheduling Suggested Algorlithm) in this paper is suggested by considering cell delay variation and token rate of leaky bucket, compared VSA and VSANT(Virtual Scheduling Algolithm with No Tolerance) with VSSA which polices violated cell probability of conformed peak cell rate and intentionally excessive peak cell rate. VSSA method using IPP(Interruped Poisson Process) model of input traffic source showed more quality of service than VSA and VSANT methods as usage parameter control because the suggested method reduced the violated cell probability of contformed peak cell rate and intentionally excessive peak cell rate.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1139-1146
• /
• 2014

Digital signal processor (DSP) and field programmable gate array (FPGA) based concentrated control systems are designed for implementing CPS-SPWM strategies. The self-defined universal asynchronous receiver/transmitter (UART) protocol is used for communication between a master controller and an individual module controller via high speed links. Aimed at undesired pulse competition, this paper analyzes its generation mechanism and presents a new method for eliminating competition pulses with no time delay. Finally, the proposed concentrated controller is applied to a 10kV/10MVar distribution static synchronous compensator (DSTATCOM) industrial prototype. Experimental results show the accuracy and reliability of the concentrated controller, and verify the superiority of the proposed elimination method for competition pulses.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.68.4-68
• /
• 2001

In the area of factory automation (FA), a lot of researches are being executed about intelligent system using network. Conventional industry controllers are implemented the connection with other controllers by using asynchronous serial communications. These methods of communication have an advantage of easy implementation but have disadvantages of lack of real-time characteristics needed in motion control, slow baud rate too low to exchange required data sufficiently and low integrity because of different communication protocol. Serial real-time communication system (SERCOS) provides international standard communication specifications (IEC 61491) for interfacing between control units and drives from different manufacturers, has real-time ...

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.509-517
• /
• 2012

This paper presents control strategies for cascaded H-bridge multilevel active power filters (APFs). A current loop controller is implemented using a proportional-resonant (PR) regulator, which achieves zero steady-state error at target frequencies. The power balancing mechanism for the dc-link capacitor voltages is analyzed and a voltage balancing controller is presented. To mitigate the picket-fence effect of the conventional FFT algorithm under asynchronous sampling conditions, the Hanning Windowed-FFT algorithm is proposed for reference current generation (RCG). This calculates the frequency, amplitude and phase of individual harmonic components accurately and as a result, selective harmonic compensation (SHC) is achieved. Simulation and experimental results are presented, which verify the validity and effectiveness of the devised control algorithms.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.40-50
• /
• 2012

The Berkeley-medium access control (B-MAC) is a lightweight, configurable and asynchronous duty cycle medium access control (MAC) protocol in wireless sensor networks. This article presents an analytic modelling of single-hop B-MAC protocol under a Poisson traffic assumption.Our model considers important B-MAC parameters such as the sleep cycle, the two stage backoff mechanism, and the extended preamble. The service delay of an arriving packet and the energy consumption are calculated by an iterative method. The simulation results verify that the proposed analytic model can accurately estimate the performance of single-hop B-MAC with different operating environments.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.21-30
• /
• 2005

In mobile computing environments, a mobile host caches the data to use the narrow bandwidth efficiently and improve the response time. A server periodically broadcasts the update data for maintaining the cache consistency of a mobile host. However, a method for maintaining cache consistency using periodic invalidation report has a problem that defers the commit decision of a mobile transaction to guarantee its serializable execution. In this paper, we propose CCM-AD method that guarantees the serializable execution of a mobile transaction even in the case that it is executed using cached data. As CCM-AD method guarantees the serializable execution of mobile transactions by using the intersection between the data broadcast to mobile host and the data updated at server. Then the CCM-AD method can reduce the delay of commitment decision of a mobile transaction. Also our method can reduce the size of invalidation report.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.86-94
• /
• 2012

Synchronization MAC Protocol such as S-MAC and T-MAC utilize duty cycling technique which peroidically operate wake-up and sleep state for reducing energy consumption. But synchronization MAC showed low energy efficiency because of additional control packets. For better energy consumption, Asychronization MAC protocols are suggested. For example, B-MAC, and X-MAC protocol adopt Low Power Listening (LPL) technique with CSMA algorithm. All nodes in these protocols joining a network with independent duty cycle schedules without additional synchronization control packets. For this reason, asynchronous MAC protocol improve energy efficiency. In this study, a low-power MAC protocol which is based on X-MAC protocol for wireless sensor network is proposed for better energy efficiency. For this protocol, we suggest preamble numbering, and virtual-synchronization technique between sender and receive node. Using TelosB mote for evaluate energy efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.59-63
• /
• 2022

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of power consumption and looks at considerations for efficient operation. Although CSL-MAC can dramatically reduce power consumption at the receiving end in an asynchronous manner, it has been found that the transmitting end has a disadvantage in that power consumption occurs due to an excessive wake-up sequence.