• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1242-1244
• /
• 2000

A new control method using average comparison strategy have been proposed in this paper. This control method realizes sinusoidal input and output current. unity input displacement factor regardless of load power factor. Moreover, compensation of the asymmetrical and/or harmonic containing input voltage is automatically realized, and calculation time of control function is reduced.

• 소성∙가공
• /
• 제31권4호
• /
• pp.214-228
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a novel anisotropic yield function useful for describing the plastic behavior of various anisotropic sheets. The proposed yield function includes the anisotropic version of the second stress invariant J₂ and the third stress invariant J₃. The anisotropic yield function newly proposed in this study is as follows. F(J₂)+ αG(J₃)+ βH (J₂ × J₃) = k^m The proposed yield function well explains the anisotropic plastic behavior of various sheets by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to aluminum sheet shows symmetrical yielding behavior and to pure titanium sheet shows asymmetric yielding behavior, it was shown that the yield curve and yield behavior of various types of sheet materials can be predicted reasonably by using the proposed new yield anisotropic function.

• 한국지능시스템학회논문지
• /
• 제19권6호
• /
• pp.787-795
• /
• 2009

본 논문에서는 영상의 화질개선을 위해 로지스틱 함수에 기반을 둔 히스토그램 평활화 방법을 제안하였다. 여기서 히스토그램 평활화는 영상의 밝기를 조정함으로써 화질을 개선하는 간단하고 효과적인 공간영역 기반 처리기법이다. 또한 로지스틱 함수는 비선형의 변환함수로 영상의 명암도 발생빈도수에 따라 밝기개선 정도를 적응적으로 조정하기 위함이다. 특히 영상의 히스토그램에서 최대 발생빈도수를 가지는 명암도와 최대 명암도 및 전체 픽셀수만을 이용한 유연한 비대칭의 로지스틱 함수를 제안함으로써, 기존 로지스틱 함수에서의 지수함수 계산 부담과 최적의 계수 값을 경험적으로 사전에 설정해야하는 제약을 해결하였다. 제안된 기법을 다양한 크기의 해상도와 히스토그램 분포를 가지는 영상을 대상으로 실험한 결과, 기존의 히스토그램 평활화와 적응적 변형 히스토그램 평활화보다도 우수한 화질개선 성능과 빠른 평활화 속도가 있음을 확인하였다. 또한 제안된 기법은 멀티미디어 시스템에서 실시간 평활화 기법으로도 충분히 이용될 수 있음을 확인하였다.

• 소성∙가공
• /
• 제31권6호
• /
• pp.351-364
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a modified version of previous anisotropic yield function (Trans. Mater. Process., 31(4) 2022, pp. 214-228) based on J2 and J3 stress invariants. The proposed anisotropic yield model has the 6th-order of stress components. The modified version of the anisotropic yield function in this study is as follows. f(J₂⁰,J₃⁰) ≡ (J₂⁰)³ + α(J₃⁰)² + β(J₂⁰)^3/2 × (J₃⁰) = k⁶ The proposed anisotropic yield function well explains the anisotropic plastic behavior of various sheets such as aluminum, high strength steel, magnesium alloy sheets etc. by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to AA6016-T4 aluminum and DP980 sheets shows symmetrical yielding behavior and to AZ31B magnesium shows asymmetric yielding behavior, it was shown that the yield locus and yielding behavior of various types of sheet materials can be predicted reasonably by using the proposed anisotropic yield function.

• Tuberculosis and Respiratory Diseases
• /
• 제43권4호
• /
• pp.651-656
• /
• 1996

저자 등은 입원 당시 전이성 암 또는 원발성 폐암의 방사선학적 소견을 보인 환자의 진단과정 중에 우리가 흔히 보는 형태가 아닌 유육종증 1예를 경험하여 문헌 고찰과 함께 보고하는 바이다.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.211-228
• /
• 2013

The structure analyzed in this paper has particular building style and special structural system. It is a rigid-connected twin-tower skyscraper with asymmetrical distribution of stiffness and masses in two towers. Because of the different stiffness between the north and the south towers, the torsion seismic vibration is significant. In this paper, in order to study the seismic response of the structure under both frequent low-intensity earthquakes as well as rare earthquakes at the levels of intensity 7, the analysis model is built and analyzed with NosaCAD. NosaCAD is an nonlinear structure analysis software based on second-development of AutoCAD with ObjectARX. It has convenient modeling function, high computational efficiency and diversity post-processing functions. The deformations, forces and damages of the structure are investigated based on the analysis. According to the analysis, there is no damage on the structure under frequent earthquakes, and the structure has sufficient capacity and ductility to resist rare earthquakes. Therefore the structure can reach the goal of no damage under frequent earthquakes and no collapse under rare earthquakes. The deformation of the structure is below the limit in Chinese code. The time sequence and distribution of damages on tubes are reasonable, which can dissipate some dynamic energy. At last, according to forces, load-carrying capacity and damage of elements, there are some suggestions on increasing the reinforcement in the core tube at base and in stiffened stories.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.325-336
• /
• 2022

This paper analyzes the ground surface settlements induced by side-by-side twin shield tunnels bored in sedimentary soils, which primarily consist of sand with clay strata above the tunnel crown. The measurements were obtained during the construction of twin tunnels underneath the Incheon International Airport (IIA) located in Korea. The measured surface settlement troughs are approximated with Gaussian functions. The trough width parameters i and K of the settlement troughs produced by the first and second tunnel passings are determined, along with those for the total settlement trough. The surface settlement troughs produced by the first shield passing are reasonably represented by a symmetric Gaussian curve. The surface settlement troughs induced by the second shield tunnel display marginal asymmetric shapes at selected sections. The total settlement troughs are fitted both with a shifted symmetric Gaussian function and the superposition method utilizing an asymmetric function for the incremental trough produced by the second tunnel. It is revealed that the superposition method does not always produce better fits with the total settlement. Instead, the shifted symmetric Gaussian function is overall demonstrated to provide more favorable agreements with the recordings. Therefore, the shifted symmetric Gaussian function is recommended to be used in the design for the prediction of the settlement in clays caused by twin tunneling considering the simplicity of the procedure compared with the superposition method. The amount of increase in the width parameter K for the twin tunnel relative to that for the single tunnel is quantified, which can be used for a preliminary estimate of the surface settlement in clay induced by twin shield tunnels.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.48-54
• /
• 2000

This paper describes the effect of molding pressure, specimen geometries for Mixed Mode I/II interlaminar fracture toughness of carbon fiber reinforced plastic composites by using asymmetrical double cantilever beam(ADCB) specimen. The value of $G_{I/IIC}$ as a function of various molding pressure is almost same at 307, 431, 585 kPa. However it shows the highest value under 307 kPa molding pressure. The effect of $G_{I/IIC}$ due to the change of initial crack length of ADCB specimen was almost negligible in this study. It turns out that the condition for mix mode quasi-static crack growth in ADCB specimen is the ratio of the crack length to that of the specimen, i.e., ${\alpha}/L<0.4$.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.783-788
• /
• 2008

This paper presents the mechanism of the machine and the numerical result of attractive force in the Electro-Permanent Magnet Lifter (EPML) and an improved niching Genetic Algorithm (GA) applying the concept of auto-tuning and detecting traces. Population size and both (right and left) niche radii of each peak in an asymmetrical objective function can be determined automatically. The validity of the proposed method is verified by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.696-697
• /
• 2015

In this paper, the shape of the slit to provide a view of the sensor in such a manner as to encode the rotor position information using a single sensor for studies of economic rotor position and speed detection method for electric motor drive has a special electronic commutator bar-and proposes a robust encoder can produce a rotor position information for each of the woman, and reads out the location information by using the position detection method of the proposed new method compared to traditional DSP Capture function of incremental encoder that its validity was verified through experiments.