• Structural Engineering and Mechanics
• /
• v.75 no.2
• /
• pp.247-269
• /
• 2020

A finite strip formulation was developed for buckling and free vibration analysis of laminated composite plates based on different shear deformation plate theories. The different shear deformation theories such as Zigzag higher order, Refined Plate Theory (RPT) and other higher order plate theories by variation of transverse shear strains through plate thickness in the parabolic form, sine and exponential were adopted here. The two loaded opposite edges of the plate were assumed to be simply supported and remaining edges were assumed to have arbitrary boundary conditions. The polynomial shape functions are applied to assess the in-plane and out-of-plane deflection and rotation of the normal cross-section of plates in the transverse direction. The finite strip procedure based on the virtual work principle was applied to derive the stiffness, geometric and mass matrices. Numerical results were obtained based on various shear deformation plate theories to verify the proposed formulation. The effects of length to thickness ratios, modulus ratios, boundary conditions, the number of layers and fiber orientation of cross-ply and angle-ply laminates were determined. The additional results on the same effects in the interaction of biaxial in-plane loadings on the critical buckling load were determined as well.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.27-35
• /
• 2017

A total of 22 sites around openings of limestone mine are chosen to assess rock mass classification schemes such as RMR, Q-system, and GSI. RMR and Q are modified to estimate the relationship with GSI. Q' is the modified Q with SRF=1.0 and $J_w=1.0$. Rock mass is assumed to be completely dry and very favorable discontinuity orientations are assumed to estimate ${RMR_{89}}^{\prime}$. Relationships of Q-Basic RMR, Q-Total RMR, ${GSI-RMR_{89}}^{\prime}$, and GSI-Q' are analyzed, in which a correlation of ${GSI-RMR_{89}}^{\prime}$ is found to be the highest. Failure strains are calculated using the modulus ratios and most measuring sites appear to be stable with low failure strain class.

• Advances in concrete construction
• /
• v.15 no.2
• /
• pp.115-126
• /
• 2023

This paper investigates creep analysis of a plate made of Al-SiC functionally graded material using Mendelson's method of successive elastic solution. All mechanical and thermal material properties, except Poisson's ratio, are assumed to be variable along the thickness direction based on the volume fraction of reinforcement and thickness. First, the basic relations of the plate are derived using the Love-Kirchhoff plate theory. The solution of governing equations yields an elastic solution to start creep analysis. The creep behavior is demonstrated through Norton's equation based on Pandey's experimental results extracted for Al-SiC functionally graded material. A linear variation is assumed for temperature distribution along the thickness direction. The creep strain, as well as the thermal strain, are included in the governing equations derived from classical plate theory for mechanical strain. A successive elastic solution based on Mendelson's method is employed to derive the history of stresses, strains, and displacements over a long time. History of stresses and deformations are obtained over a long time to predict damage to the plate because of various loadings, and material composition along the thickness and planar directions.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.20-20
• /
• 2015

Endophytic fungi are microorganisms inhabiting living plant tissues without causing apparent harm to the host. They are drawing increasing attention due to their ability to produce various bioactive compounds as well as their effects on host growth and resistance to biotic and abiotic stresses. As a first step to assess biodiversity of plant associated fungi in Korea and the following evaluation on diverse biological activities, we are collecting endophytic fungi from plant in wild followed by systematic long-term storage in liquid nitrogen. Molecular identification using ITS sequences was also incorporated for pure culture by hyphal tip isolation. As of April 2015, about 1,400 fungal strains had been isolated from about 170 plant taxa. Fungal isolates belonging to Pleosporales, Diaporthales, Glomerellales, Hypocreales, and Xylariales were the most abundant. These collections are being used for several complementary researches, including screening of isolates with novel bioactive compounds or conferring drought stress resistance, phylogenetic and genomic study. Genome sequencing was performed for 3 isolates, one Xylaria sp. strain JS573 producing griseofulvin, an antifungal compound, and two Fusarium spp. strains JS626 and JS1030, which are assumed to be new species found in Korea. More detailed analysis on these genomes will be presented. These collections and genome informations will serve as invaluable resources for identifying novel bioactive materials in addition to expand our knowledge on fungal biodiversity.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.149-156
• /
• 1995

This paper suggests a new experimental system and protocol of mechanical analysis for arterial cross-section research. So far, most methods of arterial studies have been focused on the deformation measurement in longitudinal and circumferential direction. The deformation in radial direction has been theoretically assumed by Poisson's ratio and/or the incompressibility of arterial wall. Also, the radial gradient of strains are neglected. In fact, the radial deformation and radial gradient of strains against blood pressure are important to be observed in the pathological point of view of artery. Proposed experimental system and protocol are to measure the deformation of cross-sectional artery. Also, this method enables to measure the deformation of anterior, posterior, and side site of cross-sectional area. It is meaningful to correlate the mechanically experimented data with pathological data of athroscIerotic artery.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.968-978
• /
• 1999

The effective elastic properties of materials containing spherical inclusions were calculated by the elastic wave scattering theory. In the formulation additional scattering fields by the presence of random multiple scatterers that affects the effective properties were found by the single scattering approximation. In calculating the scattering fields the ensemble average on the displacements and strains inside the scatterer was found from the static approximation at long wavelength limit. The displacements were assumed to be equal to the incident field, while the strains were calculated by Eshelby's equivalent inclusion principle on the single inclusion problem. Four different models were considered and they reflected different degrees of multiple scattering effects based on the approximation introduced in the process of embedding the inclusion in the matrix. The expressions for the effective elastic constants were given in each model, and their relations to the results obtained from other scattering theory and elasticity theory were discussed. The theoretical predictions were compared with experimental results on the epoxy matrix composites containing tungsten particles of different sizes and volume fractions

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.87-94
• /
• 2010

When occlusal force is applied to a tooth, stress concentration occurs on the dental cervical line. This study investigated to find the maximum force and strain of natural teeth using an Instron and strain gauges, comparing the strain of cervical enamel using finite element analysis(FEA). Tests were conducted with a mandibular first premolar applying the conditions of occlusion. Then, the FEA was processed with the same as conditions of the fracture test. The test showed that the maximum force, maximum compressive strain and maximum tensional strain was $278{\pm}26$ N, $0.668{\times}10^{-3}{\pm}0.678{\times}10^{-3}$ and $0.248{\times}10^{-3}{\pm}0.102{\times}10^{-3}$, respectively. It was found that six of eight measured strains were within the range of estimated strains by the FEA. Even though it was assumed that properties of FE models were isotropic, it could prove useful as a reference in understanding the tendency of dental strain.

• The Journal of the Korean Society for Microbiology
• /
• v.15 no.1
• /
• pp.19-32
• /
• 1980

Besides the benefits of antimicrobial agents in the control of various infectious diseases, widespread and prolonged use of particular antimicrobial agents has brought about the increase of drug-resistant strains in a community and the profound changes in the pattern of infectious diseases. In Korea, there are some remote villages where no clinics and drug stores are available and the residents in those areas are assumed to have fewer chances to contact with antimicrobial agents. In the present study, the differences in susceptibilities to 14 antimicrobial agents between the isolates from rural areas(R) and Seoul National University Hospital(SNUH, H) were studied. The isolates and their numbers were Staphylococcus aureus, R;55, H;68), Enterococci(R;28, H;30), Escherichia coli(R;40, H;40), Enterobacter aerogenes(R;25, H;21) and Klebsiella pneunoniae(R;58, H;67). Minimal inhibitory concentrations(MIC's) of penicillin, ampicillin, carbenicillin, cephalexin, tetracycline, oxytetracyline, doxycycline, minocycline, gentamicin, kanamycin, streptomycin, erythromycin, troleandomycin and co-trimoxazole were determined by agar dilution method. I. Comparison of MIC's and resistant strain proportions between isolates from SNUH and rural areas. MIC's and/or resistant strain proportions of the isolates from SNUH were significantly higher than those of the isolates from rural areas in the cases of 1. S. aureus to doxycycline, streptomycin and kanamycin. 2. E. coli to penicillin, ampicillin, carbenicillin, tetracycline, oxytetracycline, doxycycline, minocycline, streptomycin, kanamycin, erythromycin and co-trimoxazole. 3. E. aerogences to carbenicillin, tetracycline, oxytetracycline, doxycycline, minocycline, streptomycin, kanamycin, genaamicin and co-trimoxazole. 4. K pneunoniae to penicillin, ampicillin, tetracycline, oxytetracycline, doxycycline, monocycline, streptomycin, kanamycine, gentamicin and co-trimoxazole. However, the mean MIC and resistant strain proportion of S. aureus to tetracycline were higher in isolates from rural areas than in those from SNUH and Enterococci showed no differences in susceptibilities to the antimicrobial agents between isolates from rural areas and from SNUH. Therefore, in general, differenes in susceptibility to these antimicrobial agents between the isolates from rural areas and SNUH were remarkably greater and broader in gram negative enteric bacteria. II. Multiple drug resistance pattern. Patterns and incidences of multiple drug resistance were studied with penicillin, ampicillin, tetracycline, cephalexin, gentamicin, streptomcin, kanamycin and co-trimoxazole in Enterococci, E. coli, E. aeroges and K. pneumoniae. There appeared significant differences in the incidence of multiply drug-resistant strains and multiple drug resistance patterns between the isolates from SNUH and rural areas in Enterococci, E. coli, E. aerogenes and K. pneumoniae. However, there was no difference in the incidence of multiply drug-resistant strains between isolates of S. aureus from SNUH and rural areas but the pattern of multiple resistance of the SNUH strains of S. aureus was diverse, while that of the rural strains was predominantly confined to penicillin-tetracycline combination. The incidence of multigly drug-resistant strains and diversity of their patterns were the highest in E. coli strains isolated from SNUH and there were no multiply drug resistant strrains in Enterococci and K. pneumoniae strains isolated from rural areas. The number of drug-resistance determinants was also different between the isolates from rural areas and SNUH. Most of the multiply drug-resistant strains of E. coli, E. aerogenes and K. pneumoniae isolated from SNUH were resistant to more than 3 kinds of antimicrobial agents, most frequently to ampicillin, tetracycline and streptomycin, while multiply drug-resistant strains from rural areas were resistant to 2 kinds of antimicrobial agents among ampicillin, tetracycline and streptomycin. With drug-resistant E. coli strains, resistance to tetracycline which was used most widely since 1951 was most frequently involved as a part of mutliple drug-resistance, followed by resistance to ampicillin and streptomycin. This strongly suggests that emergence of drug-restant strains in a community is directly dependent on the selective pressure exerted by the antimicrobial agent used. III. Cross resistance. Cross resistance of bacteria was studied among tetracycline penicillin, aminoglycoside and macrolide derivatives by analyzing correlation coefficients of sucseptibilities using the least square method. In this study, there were high correlations among the susceptibilities to related derivatives. It appears that the relatively low correlations in susceptibilities present in some cases are due to intrinsic resistance of E. aerogenes to penicillin, Enterococci to aminoglycoside and E. coli E. aerogenes and K. pneumoniae to macrolide derivatives.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.329-337
• /
• 2000

An investigation has been performed to develop an analysis tool based on a nonlinear beam theory, which can be used to predict the long-term behavior of an artificial hip joint. The nonlinear behav ior of the femur arise from the coupled dependence of the bone density and the mechanical properties on each other. The beam theory together with its numerical algorithm is developed to take into account the nonlinear bone remodeling process of the femur that is long enough to be assumed as a beam. A piecewise linear curve for the bone remodeling rate is used in the bone remodeling theory and the surface area density of bone is modeled as the third order polynomial function of bone density. At each section of the beam, a constant curvature is assumed and the longitudinal strains are also assumed to vary linearly across the section. The Newton-Rhapson iteration method is used to solve the nonlinear equations for each cross section of the bone and a backward method is used to march along the time. The density and the remodeling signal ar, calculated along with time for the various time steps, and the developed beam theory has been verified by comparing with the results of finite element analysis of a remodeling bone with an artificial hip joint of titanium prosthesis subjected to uni-axial loads and pure bending moment. It is concluded that the developed beam theory can be used to predict the long-term behavior of the femur and thus to design the artificial hip prosthesis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.247-258
• /
• 2004

The composite shell element is developed for the solution of undamped forced vibration problem of composite curved panels. The finite element used in the current study is an 4-node enhanced assumed shell element with six degrees of freedom per node. The composite shell element is free of both shear and membrane locking phenomenon by using the enhanced assumed strain(EAS) method. A modification to the first-order shear deformation shell theory is proposed, which results in parabolic thorough-thickness distribution of the transverse shear strains and stresses. It eliminates the need for shear correction factors in the first order theory. Newmark's direct integration technique is used for carrying out the integration of the equation motion, to obtain the repones history. Parametric studies of curved composite panels are carried out for forced vibration analysis by geometrical shapes and by laminated composite; such as fiber orientation, stacking sequence.