• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1047-1055
• /
• 2006

필드이온빔(FIB) 가공기를 써서 초고강도의 벌크다이아몬드를 가공하기 위해 이온 소오스의 종류와 가공 조건에 따른 나노급 미세 선폭의 최적조건을 알아보고 이에 근거한 2차원적인 텍스트의 가공과 3차원적인 박막요소의 가공을 시도하였다. 다이아몬드 기판과 실리콘 기판을 Ga과 $H_2O$ 소오스를 이용하는 FIB를 써서 30 kV 빔 전류를 10 pA $\sim$ 5 nA로 변화시키면서 패터닝하고 이때 각각 20 ${\mu}m$ 길이로 생성되는 선형 패턴의 선폭, 깊이, 에치속도, 에치형상, 깊이선폭비 (aspect ratio)를 확인하였다. 다이아몬드도 실리콘 기판과 마찬가지로 나노급 패턴의 형성이 가능하였다. $H_2O$ 소오스를 채용한 경우가 에치 깊이가 2배 정도 증가하였으며 동일한 가공 조건에서는 실리콘에 비해 다이아몬드의 에치 선폭이 감소는 경향이 있었다. 특히 다이아몬드는 절연성 때문에 차지가 축적되어 가공 중 이온빔이 불안정해지는 문제가 있었으나 차지 중화 모드를 이용하여 성공적으로 sub-100 nm급 선폭의 미세 가공이 가능하였다. 확인된 선폭가공 조건에 근거하여 2차원적으로 0.3carat의 보석용 다이아몬드의 거들부에 300여개의 글자를 FIB를 활용하여 선폭 240 nm정도로 명확히 기록하는 것이 가능하였다. $Ga^+$이온과 30 eV-30 pA로 조건에서 비교적 넓은 선폭과 Z축 depth 고정범위에서 많은 개인정보의 기록이 영구적으로 가능하였으며 전자현미경으로 재생이 가능하였다. 3차원적으로 두께 $1{\mu}m$의 박막요소를 FIB가공과 백금 용접으로 떼어낸 후 FIB가공으로 두께가 100 nm가 되도록 한 후 투과전자현미경을 이용하여 성분 분석을 하는 것이 성공적으로 수행될 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.98-98
• /
• 1999

Highly transparent and conducting tin-doped indium oxide (ITO) films were deposited on polycarbonate substrate by ion-assited deposition. Low substrate temperature (<10$0^{\circ}C$) was maintained during deposition to prevent the polycarbonate substrate from be deformed. The influence of ion beam energy, ion current density, and tin doping, on the structural, electrical and optical properties of deposited films was investigated. Indium oxide and tin-doped indium oxide (9 wt% SnO2) sources were evaporated with assisting ionized oxygen in high vacuum chamber at a pressure of 2$\times$10-5 torr and deposition temperature was varied from room temperature to 10$0^{\circ}C$. Oxygen gas was ionized and accelerated by cold hallow-cathode type ion gun at oxygen flow rate of 1 sccm(ml/min). Ion bea potential and ion current of oxygen ions was changed from 0 to 700 V and from 0.54 to 1.62 $\mu$A. The change of microstructure of deposited films was examined by XRD and SEM. The electrical resistivity and optical transmittance were measured by four-point porbe and conventional spectrophotometer. From the results of spectrophotometer, both the refractive index and the extinction coefficient were derived.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.145.2-145.2
• /
• 2013

The band-gap opening in graphene is a key factor in developing graphene-based field effect transistors. Although graphene is a gapless semimetal, a band-gap opens when graphene is formed into a graphene nanoribbon (GNR). Moreover, the band-gap energy can be manipulated by the width of the GNR. In this study, we propose a site-specific synthesis of a width-tailored GNR directly onto an insulating substrate. Predeposition of a diamond-like carbon nanotemplate onto a SiO2/Si wafer via focused ion beam-assisted chemical vapor deposition is first utilized for growth of the GNR. These results may present a feasible route for growing a width-tailored GNR onto a specific region of an insulating substrate.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.151-156
• /
• 2015

In order to improve the properties of high-temperature superconducting wire for superconducting cable system, we optimized the electro-polishing (EP), ion-beam assisted deposition (IBAD), superconducting (SC) layer, and baking (heat) treatment. The buffer layer was deposited on electro-polished substrate with RMS roughness ($R_{RMS}$) less than 5 nm. The IBAD process was carried out at $V_{beam}$: 1100 V and $V_{accel}$: 850 V that resulted in highly crystalline film of $LaMnO_3$. Chemical composition of SC layer is key to higher critical current, and we found that composition can be determined by surface color of SC layer. We adopt a proprietary contorl system based on RGB analysis of the surface and achieved critical current of 150 A/4 mm-width. The proposed baking treatment resulted in decreasing of about 10% of fraction defects.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.18-21
• /
• 2007

Highly textured MgO template by ion-beam-assisted deposition(IBAD) was successfully fabricated using a continuous reel-to-reel(R2R) mode. To enlarge the deposition area, the previous IBAD system was modified into the system with 14-pass and five heating zone. Every processing step was carried out using this multi-turn IBAD system. The overall process consists of R2R electropolishing of a hastelloy C276 tape, deposition of $Al_2O_3$ diffusion barrier, $Y_2O_3$ seed layer, IBAD-MgO and homoepi-MgO layer. The IBAD-MgO templates were fabricated using the IBAD system with 216 cm-length deposition zone and 32 cm diameter ion source. The texture of MgO films developed during the IBAD process was monitored by in-situ reflection high energy electron diffraction(RHEED) to optimize the IBAD process. Recently, 100 m long IBAD-MgO tape with in-plane texture of $\Delta{\phi}<10^{\circ}$ was successfully fabricated using the modified IBAD system. In this report, the detailed deposition condition of getting a long length IBAD-MgO template with a good epitaxy is described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.489-493
• /
• 2004

[ $Ba_2NaNb_5O_{15}$ ]은 orthorhombic tungsten bronze 결정구조를 갖는 강유전체로서, 단결정의 경우 $LiNbO_3$에 비해 우수한 비선형 전광계수 값을 나타내는 것으로 알려져 있으며, 또한 주목할만한 초전, 압전, 강유전특성을 나타내고 있다. 본 연구에서는 다른 강유전체박막에 비하여 상대적으로 연구가 덜 이루어진 BNN 박막을 세라믹 타겟을 사용하여 이온빔 보조 증착법을 사용하여 제조하였으며, $Ar/O_2$ 분위기에서 증착된 BNN 박막에 대한 결정화 및 배향 특성을 고찰하였고, 이에 따른 전기적 특성의 변화를 살펴보았다. 연구에 사용된 기판은 $Pt(100)/TiO_2/SiO_2/Si(100)$이었으며, 이온빔 보조 증착법에서 보조 이온빔의 에너지를 $0{\sim}400eV$로 변화 시키며 BNN 박막을 증착한 후, 열처리하였다. BNN 박막의 전기적 특성은 MFM 박막 커패시터의 형태로 제조하여 강유전 특성에 대해 살펴보았다.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.788-796
• /
• 1996

$TiO_2$ films prepared by RF magnetron sputtering, electron beam evaporation, ion assisted deposition (IAD) and sol-gel method are prepared on c-Si substrate and vitreous silica substrate respectively. From the transmission spectra of $TiO_2$ films on vitreous silica substrate in the spectral region from 190 nm to 900 nm, k($\lambda$) of $TiO_2$ is obtained. Using k($\lambda$) in the interband transition region the coefficients of the quantum mechanical dispersion relation of an amorphous $TiO_2$ and hence n($\lambda$) including the optically opaque region of above fundamental transition energy are obtained. The spectroscopic ellipsometry spectra of $TiO_2$ films in the spectral region of 1.5-5.0eV are model analyzed to get the film packing density variation versus i) substrate material, ii) film thickness and iii) film growth technique. The complex refractive index change of these $TiO_2$ films versus water condensation is also studied. Film micro-structures by SE modelling results are compared with those by atomic force microscopy images and X-ray diffraction data.

• 한국재료학회지
• /
• 제5권3호
• /
• pp.297-309
• /
• 1995

본 연구에서는 이온선보조증착법에 의해 Si(100)기판위에 정합성장된 $Si_{0.5}$Ge_{0.5}$층의 핵성성과 성장을 고찰하였다. 성장층에 대한 AFM(Atomic Force Microscopy), RHEED(Reflection High Energy Electron diffraction) 등의 분석결과 Si(100)기판위에 이온선보조증착에 의하여 성장된 $Si_{0.5}$Ge_{0.5}$층은 Stranski-Kranstanov(SK)기구로 성장되며, 300eV, 10 $\mu$A/$cm^{2}$의 Ar이온선을 조사시키는 경우 결정성이 향상되었고, SK 성장 방식의 임계두께가 증가하였다. Ar 이온선 조사에 의해 MBE에 의한 정합성장온도(55$0^{\circ}C$-$600^{\circ}C$)보다 훨씬 낮은 20$0^{\circ}C$에서 정합성장이 가능하였으며, $x_{mn}$값은 10.5%로 MBE에 의한 정합성장시 보고된 $x_{mn}$ 값보다 낮았다. 이온충돌에 의해 발생한 3차원 island의 분해와 표면확산의 증가가 $Si_{0.5}$Ge_{0.5}$층의 성장에 현저한 영향을 미쳤으며, 이온충돌의 영향은 3차원 island의 생성보다 3차원 island의 분해가 더 안정한 낮은 증착온도에서만 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.282-283
• /
• 2005

Ion beam assisted deposition(IBAD) technique was used to produce biaxially textured polycrystalline MgO thin films for high critical current YBCO coated conductor. Hastelloy tapes were continuous electropolished with very smooth surface for IBAD-MgO deposition, RMS roughness of Hastelloy tape values below 2 nm and local slope of less than $1^{\circ}$. After the polishing of the tape an amorphous $Y_2O_3$ and $Al_2O_3$ are deposited Biaxially textured MgO was deposited on amorphous layer bye-beam evaporation with a simultaneous bombardment of high energy ions. We had developed the RHEED to measure in-situ biaxial texture of film surface as thin as tens angstrom. And also ex-situ characterization of buffer layers was studied using XRD and SEM. The full-width at half maximum(FWHM) out of plane texture of IBAD-MgO template is $4^{\circ}$.