• 한국추진공학회지
• /
• 제2권3호
• /
• pp.107-115
• /
• 1998

복합재료와 금속 튜브 사이의 좁고 긴 원통형 공간을 EPDM(Ethylene propylene dien ter polymer)으로 충전하는 연구를 수행하였다. 휴대용 유도무기의 추진기관을 개발하기 위하여 소형 연소관 조립체를 설계하고 제작하였다. 연소관 조립체는 연소관 금속튜브, 연소관 내열재, 그리고 연소관 단열재로 이루어져 있는데 연소관 내열재는 탄소/페놀릭을 사용하여 롤링 공법으로 제작하였으며 연소관 단열재는 EPDM을 사용하여 TPM 공법으로 제작하였다. EPDM의 조성 선정을 위하여 내열 삭마특성, 열분해특성 실험을 수행하였으며 흐름성, 접착성, 경도측정 등을 통하여 최종 조성을 결정하였다. 연소관 조립체를 제작하기 위한 EPDM 충전을 위하여 TPM 공법을 설계하고 금형과 치구를 제작하였다. 충전된 연소관 조립체는 비파괴검사를 통하여 접착, 기공 등을 검사하여 최종 선정되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.139-141
• /
• 2005

It is possble to study charge transfer property which is caused by height variation because we can see the organic materials barrier height and STM tip by organic materials energy band gap. Here, we investigated the negative differential resistance(NDR) and charge transfer property of self-assembled 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment($H_{2}SO_{4}:H_{2}O_{2}$=3:1) Si. The Au substrate was exposed to a 1 mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/1$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_{2}Cl_{2}$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -1.50 V to -1.20 V with 298 K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found that NDR and charge transfer property by a little change of height when the voltage is applied between STM tip and electrode.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.48-53
• /
• 2013

An automotive air conditioning assembly consists of a condenser, a compressor and an evaporator. These major components are connected with rubber hoses and aluminum pipes. Once mounted on the automotive air conditioning assembly, it is exposed to a serious vibration environment for a long time. In some cases, there are vibration cracking on the assembly. In order to solve this vibration problem, several real vibration tests are performed on the assembly of which the lay-out was optimized, in spite of sample production cost and making time. In this study, a frequency response analysis, which is a kind of finite element method of the vibration, was performed to know the characteristic of the vibration transmission on the assembly lay-out. The analysis result indicated the damping performance, which is satisfied with the vibration standard of car maker, in rubber hoses and the whole assembly.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 International Symposium
• /
• pp.21-30
• /
• 2002

According the difference of flex substrate, (reel tape), there are three kind assembly types of LCD driver IC is COG, TCP and COF, respectively. The TCP is the maturest in these types for stability of raw material supply and other specification. And TCP is the major assembly type of LCD driver IC and the huge demand from Taiwan's large TFT LCD panel house since this spring. But due to its package structure and the raw material applied in this package, there is some limitation in fine pitch application of this package type, (TCP). So, COF will be very potential in compact and portable application comparison with TCP in the future. There are three kinds assembly methods in COF, one is ACF by using the anisotropic conductive film to connect the copper lead of tape and gold bump of IC, another is eutectic bonding by using the thermo-pressure to joint the copper lead of tape and gold bump of IC, and last is NCP by using non-conductive paste to adhere the copper lead of tape and gold bump of IC. To have a global realization, this paper will briefly review the status of Taiwan's large TFT panel house, the internal driver IC design house, and the back-end assembly house in the beginning. The different material property of raw material, PI tape is also compared in the paper. The more detail of three kinds of COF assembly method will be described and compared in this paper.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.291-297
• /
• 2010

This article introduces a facile nanoparticle self-assembly/annealing method for the preparation of nanoisland films. First, nanoparticle-polymer multilayer films are prepared with layer-by-layer assembly. Nanoparticle multilayer films are then annealed at $~500^{\circ}C$ in air to evaporate organic matters from the films. During the annealing process, the nanoparticles on the solid surface undergo nucleation and coalescence, resulting in the formation of nanostructured gold island arrays. By controlling the overall thickness (number of layers) of nanoparticle multilayer films, nanoisland films with various island density and different average sizes are obtained. The surface property of gold nanoisland films is further controlled by the self-assembly of alkanethiols, which results in an increased surface hydrophobicity of the films. The structure and characteristics of these nanoisland film arrays are found to be quite comparable to those of nanoisland films prepared by vacuum evaporation method. However, this self-assembly/annealing protocol is simple and requires only common laboratory supplies and equipment for the entire preparation process.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.34-40
• /
• 2019

We performed shape optimization of an anti-vibration rubber assembly which is used in the field option cabin of agricultural tractors to improve the vibration isolation capability. To characterize the hyper-elastic material property of rubber, we performed uniaxial and biaxial tension tests and used the data to calibrate the material model applied in the finite element analyses. We conducted a field test to characterize the input excitation from the tractor and the output response at the cabin frame. To account for the nonlinear behavior of rubber, we performed static analyses to derive the load-displacement curve of the anti-vibration rubber assembly. The stiffness of the rubber assembly could be calculated from this curve and was input to the harmonic analyses of the cabin. We compared the results with the test data for verification. We utilized Taguchi's parameter design method to determine the optimal shape of the anti-vibration rubber assembly and found two distinct shapes with reduced stiffness. Results show that the vibration at the cabin frame was reduced by approximately 35% or 47.6% compared with the initial design using the two optimized models.

• 헤리티지:역사와 과학
• /
• 제36권
• /
• pp.39-67
• /
• 2003

In this paper we examine cultural properties of the North Korea from 'the law of the Democratic People's Republic of Korea on Protection of Cultural Property". This law was adopted the Resolution of the Standing Committee of the Supreme People's Assembly of DPR of Korea in 1994. For our study, some other laws or rules established after the end of Japanese colonial occupation (1910-1945) in North Korea were examined. The policy on protection and conservation of cultural property in North Korea seems to have taken place a relatively rapid. The purpose of this law is to carry out the policy with a view to contributing to establishment of strict system and order for protection and management of cultural property, to their preservation in original state, to their proper inheritance and development, and to enhancement of national pride and confidence among the people. This law consists of 6 chapters (52 articles): (1) Fundamentals of the law on protection of cultural property, (2) Archaeological excavation and collection of cultural relics, (3) Evaluation and registration of cultural property, (4) Preservation and management of cultural property, (5) Restoration of cultural property, and (6) Guidance and control of cultural property protection. Nevertheless, it is difficult to find the evidence of efforts to exploit the cultural properties from an academic point of view in North Korea since the late 1980s.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.651-654
• /
• 2014

• 한국건축시공학회지
• /
• 제15권1호
• /
• pp.107-113
• /
• 2015

최근 건설 분야에서 기계화 공법 등이 활발히 개발되고 있지만, 건설 산업은 전체 산업분야 가운데 여전히 가장 많은 노동력을 필요로 하는 산업분야이다. 특히 재료 리사이클의 활성화를 위해서는 단일 소재화 분리를 위한 수작업에 의한 각종 해체작업 또한 증가하게 된다. 그러나 품셈을 비롯한 관련 통계 기반의 데이터베이스는 실제 인간 에너지의 분석에 한계가 있으며, 해체 작업의 경우는 대부분 정성적인 평가가 주를 이루어 왔다. 본 연구에서는 건설 분야의 인간 노동량의 정량 평가를 위하여 가속도계의 도입을 시도하였다. 이를 위하여 못과 나사못에 의한 조립 및 해체과정을 가속도계를 통하여 에너지량으로 산출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1305-1306
• /
• 2006

A monolayer assembly of anthracene-viologen linked thiol ($AMVC_{8}SH$) was fabricated on a gold electrode by self-assembly method. Structural property of the self-assembled monolayers (SAMs) was carried out by optical and electrochemical method. Firstly, we investigated PL spectrum and UV/visible absorption for the optical properties in solution state. Secondly, we determined the characteristics of charge transfer in different electrolyte solutions by electrochemical quartz crystal microbalance (EQCM). From the data, the PL spectrum and UV/visible absorption were observed and the well-defined shape peaks were nearly equal charges during redox reactions and existed to an excellent linear relationship between the scan rates and existed to currents. The mass change was determined during redox reaction. The mass change behavior of SAMs was not only governed by the mobility of the ion in the viologen but the valence of the ion in the electrolyte solution.