• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.9-18
• /
• 1997

In this paper, we implemented the communication module in the Telephone Network Access Subsystem(TNAS) of the Advanced Communications Processing System(ACPS). We defined some kinds of communication tasks and related resources like several queues which are executed in real-time operating system, and implemented the procedures for processing the user information. Through traffic modeling and simulation, the performance of the Service Processing board Assembly(SPA) is evaluated in the aspets of system utilization and buffer size. The ACPS should accommodate various public networks such as public switch telephone network, packet switchen data network, frame realy netork, and ATM network. The communications module proposed in this paper could be used inthe interface beween the SPA and the High Speed Network Adaptor of other network interface subsystems.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.90-95
• /
• 1999

Chucking for workpieces is very important for productivity and efficiency in lathe operations. In point of productivity top jaws of the chuck should be changed as quickly as possible in order to reduce idle times wherever workpieces are regripped. A quick change power chuck which can change top jaws quickly by using a jaw change handle without any assembly/disassembly processes of screws is analyzed for this study. strength and stiffness of top jaws by centrifugal force are considered for the design. Structural analysis for the chuck is executed and the finite element method is introduced using MSC/NASTRAN software. Also, the performance of the chuck is evaluated by experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.918-923
• /
• 2007

Currently, automotive industries improve the vehicle performance and reduce the development period of vehicle using each module part for the high quality and performance of vehicles. However each component part doesn't generate the noise and vibration problems, sometime these problems are generated on the assembly status between vehicle chassis frame and each module part. On this study, in order to analysis the dynamic characteristics of a shield door module that is a typical module part of vehicles, the acquisition and evaluation process about the vibration and noise of shield door module is developed. Also the possibility to apply to shield door module of the developed process is verified by the comparison with the dynamic characteristics between plastic and steel module plate.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.97-100
• /
• 1999

Mobile network applications are growing and this requires a fast and efficient transport method between the BS(Base Station) and the MSC(Mobile Switching Center). One possible solution is to use ATM and a voice CODEC standard which compresses 64kbps voice data to less than 8kbps. The low bit tate and small-sized packets made by the voice CODEC imply that significant amount of link bandwidth would be wasted, if this small-sized packet is carried by one ATM cell. The cell assembly delay increases if one ATM cell is fully filled with the small-sized packets. For the bandwidth-efficient transmission of low-rate, short, and variable length packets in delay sensitive applications, AAL-2 was standardized. This paper evaluates performance of AAL-2 by using voice CODEC standard.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.265-269
• /
• 2005

Surge protective devices can be divided into three categories based on the circuit assembly: a parallel circuit type that considers the surge current amount within the device, a series circuit type that considers the voltage and single circuit type that uses a single element. However, when assembling SPDs, there are many things including function and safety to be taken into consideration because they are directly related to the performance and safety of the device. In this paper, we executed an experimental comparative study of performance and thermal stability of each SPD type using lightning surge generator and thermal image camera.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.529-532
• /
• 2008

Recently the compound material has interested in using the structural material as the bridge member assembly. It is the lighter material against existing construction material and has excellent durability and economy. The existing floor of bridge has its short period to repair and replace compared to other parts of the bridge with the pavement and the shoe. These deteriorations of usage and safety by aging and corrosion are needed frequent maintenance. The use of compound material as a structural member suggests solve these problems. So this thesis evaluates the static and the fatigue performance for whether there are fiber lamination direction and stress concentration section of FRP floor plate, the compound material.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.194-201
• /
• 2003

This study presents the comparative filtration performance evaluation of automotive fuel filters based on the theory of Beta ratio. For the experiments, the fuel component's test stand incorporating the multi-pass filtration test circuit was developed. A mathematical description of filtration process in general was derived. And the theoretical basis of multi-pass test and the test procedure were described in detail. Experimental results revealed that domestic fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity of contaminants close to the specification at maximum pressure drop across the filter assembly. The results of experiments and simulations also showed that filtration system model could be refined including desorption ratio to estimate the variable Beta ratio in service life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.1-7
• /
• 2021

In recent years, automated process technology has allowed for the rapid manufacturing of metal parts. Maintaining high product quality is of vital importance during the production of these parts. Surface defects occurring after processing can compromise their assembly precision and performance. In this study, a deburring tool was developed that can remove burrs generated from drilling. Through the evaluation of processing, burrs were completely removed at entrance and exit surfaces. Therefore, this newly developed deburring tool shows better performance than deburring tools currently in use.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.82-88
• /
• 2008

ARM processors are being utilized in a variety of embedded systems. It is also that most ARM processor accepts C application, and then generates ARM assembly code using GNU gcc Cross-compiler. For the purpose of improving the quality of code generated and the efficient code generation, the various researches are underway. In this paper, we generates the ARM assembly code from the ANSI C programs using Syntax-directed Translation Techniques, and then the performance evaluation results for our research experimental compare to GNU gcc Cross-compiler are described. The techniques are presented in this research compared to GNU gcc cross-compiler very simple and convenient in extension of the production rules.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.3
• /
• pp.327-343
• /
• 2011

The goal of this study was to examine ways to improve the quality of databases of the Korean National Assembly Digital Library(KNADL). In order to achieve the goal, we first designed an assessment tool that could measure the quality of the 'contents,' the 'service,' and the 'system' of the KNADL's databases. Each of the three categories also had sub-categories-i.e., eight sub-categories for 'contents'(e.g., accuracy, recency, ${\cdots}$), seven sub-categories for 'service'(e.g., convenience for request, rapid response, ${\cdots}$), and seven sub-categories for 'system'(e.g., usability, response time, ${\cdots}$). We thenconducted a survey using the assessment tool we developed and gathered a total of 270 responses from users of KNADL's databases. We used Excel and PASW Statistics 18 for data analysis. Each sub-category was measured by its importance and by the level of satisfaction(implemented from the DigiQUAL project). Finally, we performed an importance-satisfaction analysis(ISA) to identify what action(i.e., maintain, concentrate, low priority, and exceed) needs to be made in each sub-category. We concluded the paper with some useful suggestions for improving the quality of KNADL's databases.