A permanent deformation model was developed in this study based on the shear properties of asphalt mixtures such as cohesion and friction angle. Triaxial compressive strength (TCS) and repeated load permanent deformation (RLPD) tests on the three types of asphalt mixtures are performed at various loading and temperature conditions to correlate shear properties of asphalt mixtures to rutting performance. It is observed from the tests results that the ratio of shear stress to strength accurately identifies the mixture rutting performance. It could take care of not only mixture types but also load and temperature conditions dependences. Three different versions of the permanent deformation model based on different input levels are proposed and verified using the tests data. The proposed model based on the ratio of shear stress to strength can successfully predict the permanent deformation of various asphalt mixtures all the way up to the 10% of permanent strain including all three stages of permanent deformation in a wide range of loading and temperature conditions without changing model coefficients.
PURPOSES :The objective of this study is to evaluate the performance of asphalt mixtures containing inorganic additive and a high content of reclaimed asphalt pavement (RAP). METHODS : The laboratory tests verified the superior laboratory performance of inorganic additive compared to cement, in cold recycled asphalt mixtures. To investigate the moisture susceptibility of the specimens, tensile strength ratio (TSR) tests were performed. In addition, dynamic modulus test was conducted to evaluate the performance of cold recycled asphalt mixture. RESULTS :It was determined that NaOH solution mixed with $Na_2SiO_3$ in the ratio 75:10 provides optimum performance. Compared to Type B and C counterparts, Type A mixtures consisting of an inorganic additive performed better in the Indirect tensile strength test, tensile strength ratio test, and dynamic modulus test. CONCLUSIONS : The use of inorganic additive enhances the indirect strength and dynamic modulus performance of the asphalt mixture. However, additional experiments are to be conducted to improve the reliability of the result with respect to the effect of inorganic additive.
골재의 입도에 따른 SBS 개질 아스팔트 혼합물의 점탄성 물성 및 피로공용 특성을 소개하였다. 아스팔트 바인더와 혼합물의 열역학적 거동분석을 위해 DSR 시험과 일축인장 크립시험을 실시하였다. 골재의 입도와 SBS 개질재가 피로공용성에 미치는 영향을 평가하기 위하여 7종의 아스팔트 혼합물에 대해 일축인장 피로시험을 실시하였다. DSR 및 일축인장 크립시험결과, 골재의 입도에 관계없이 SBS 개질 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 고온에서 소성변형에 대한 저항성이 큰 것으로 나타났다. Superpave 아스팔트 바인더 규격의 피로인자 $G^*sin\delta$는 아스팔트 혼합물의 피로 공용성 평가에 사용하기에는 부적절한 것으로 사료된다. 일축인장피로시험결과, 골재의 입도(밀입도, Superpave입도, SMA입도)에 관계없이 SBS 개질 아스팔트 혼합물이 일반 혼합물에 비해 약 10배 이상 피로수명이 큰 것으로 나타났다. 장기노화후의 경우에 있어서도 SBS 개질 혼합물의 피로수명이 일반 혼합물에 비해 높게 나타났다. 골재의 입도변화는 SBS 개질재에 비해 피로공용성에 미치는 영향이 적었다. SMA 혼합물에 첨가한 셀룰로오스 섬유는 혼합물의 점탄성 물성이나 피로공용성에 미치는 영향이 미미하였으나, Draindown을 방지하는 데는 효과적이었다. SMA 입도에 SBS 개질아스팔트를 사용할지라도 Draindown 방지를 위해서는 셀룰로오스 섬유를 첨가할 필요가 있을 것으로 사료된다.
본 연구의 목적은 장경간 강바닥판 교량의 교면포장 재료로서 에폭시 아스팔트 혼합물을 평가하고, 현장에 적용하는 것에 있다. 에폭시 아스팔트 혼합물의 국내 적용을 위한 골재입도를 제시하였고, 실내 공용성 실험을 수행한 결과 내구성능 면에서 매우 우수함을 알 수 있었다. 또한, 온도에 따른 회복탄성계수와 전단부착강도 시험결과를 활용하여 구조해석을 실시 후 전단응력 검토결과 전단부착강도의 9%로도 충분한 접착 성능을 확보할 수 있는 것으로 나타났다. 에폭시 아스팔트 교면 포장에 발생하는 인장응력의 경우 중국에 시공되어 검증된 난징대교 실내시험결과와 비교 시 유사하거나 작은 값을 나타내어 충분한 공용 성능을 확보할 수 있는 것으로 나타났다. 결과적으로 에폭시 아스팔트 혼합물은 일반 아스팔트에 비해 매우 우수한 내구성능을 확보할 수 있는 것으로 나타났다. 하지만 현장에서 장경간 강바닥판 교량의 교면포장 재료로서 에폭시 아스팔트 혼합물을 적용할 경우 온도와 양생기간에 따른 강도발현에 차이가 있을 수 있으므로 현장 적용 시, 생산 시료로 제작한 혼합물에 대한 평가가 이루어져야 한다.
PURPOSES : This study primarily focused on evaluating the performance characteristics of 4.75-mm nominal maximum aggregate size (NMAS) asphalt mixtures for their more effective implementation to a layered flexible pavement system. METHODS : The full-scale pavements in the FDOT's accelerated pavement testing (APT) program, including 4.75-mm mixtures at the top with different thicknesses and asphalt binder types, were considered for the faster and more realistic evaluation of the rutting performance. The results of superpave indirect tensile (IDT) tests and hot-mix asphalt fracture mechanics (HMA-FM) based model predictions were used for cracking performance assessments. RESULTS : The results indicated that the rutting performance of pavement structures with 4.75-mm mixtures may not be as good as to those with the typical 12.5-mm mixtures, and pavement rutting was primarily confined to the top layer of 4.75-mm mixtures. This was likely due to the relatively higher mixture instability and lower shear resistance compared to 12.5-mm mixtures. The energy ratio (ER) and HMA-FM based model performance prediction results showed a potential benefit of 4.75-mm mixtures in enhanced cracking resistance. CONCLUSIONS : In relation to their implementation, the best use of 4.75-mm mixtures seem to be as a surface course for low-traffic-volume applications. These mixtures can also be properly used as a preservation treatment that does not necessarily last as long as 12.5-mm NMAS structural mixes. It is recommended that adequate thicknesses and binder types be considered for the proper application of a 4.75-mm mixture in asphalt pavements to effectively resist both rutting and cracking.
본 연구는 도로 포장에 자체 융설 아스팔트 혼합물의 적용을 위해, 융빙특성을 분석하는 기초연구의 일환으로 수행되었다. 본 연구의 목적은 이러한 문제점을 해결하기 위해 아스콘 제조시 지속성있는 융설제를 첨가하여 높은 융설기능을 유지하도록 한 아스팔트 혼합물을 개발하고 이에 대한 융빙(설) 특성 및 아스팔트 포장으로서의 역학적 특성을 알아보는데 있다. 결합재로는 AC 60-80이 사용되었고, 본 연구에서 개발된 융설제와 CRM이 건식 혼합방법으로 사용되었다. 기존 포장위에 박층포장 용도로 사용하기 위한 샌드 융설 아스팔트 혼합물과 표층용 혼합물과 동일 용도인 13mm 밀입도 융설 아스팔트 혼합물을 개발하였다. 아스팔트 혼합물의 특성을 평가하기 위하여 마샬안정도와 간접인장강도, 결빙 및 융빙실험, 용출수의 수질분석 실험을 수행하였다 융설 아스팔트 혼합물은 포장용 혼합물로서의 충분한 강도 및 우수한 융설 기능도 가지고 있는 것으로 나타났으며, 용출수의 중성화를 유도하여 도로 주변의 식생에도 악영향을 미치지 않을 것으로 판단된다.
일반적으로 유화 아스팔트와 폼드 아스팔트를 사용한 현장 상온 재생 아스팔트 포장은 노후한 아스팔트 포장을 재생하는데 가장 경제적이며 친환경적인 재활용 공법이다. 최근, 현장 상온 재생 아스팔트 혼합물의 코팅, 라벨링, 잔류안정도, 양생조건을 향상시켜주는 고점착 유화 아스팔트가 개발되었다. 본 연구의 목적은 현장 상온 재생 아스팔트 포장을 위한 고점착 유화 아스팔트 혼합물과 폼드 아스팔트 혼합물의 실내시험에 대한 반응특성을 비교하는 것이다. 고점착 유화 아스팔트 혼합물은 폼드 아스팔트 혼합물과 비교하여 재활용 골재를 균일하게 코팅시켜주는 것으로 육안 관찰되었다. 현장 상온 재생 아스팔트 포장을 위한 고점착 유화 아스팔트 혼합물과 폼드 아스팔트 혼합물의 마샬안정도와 간접인장강도는 유사한 반응을 보여주었다. 하지만 진공으로 포화된 습윤상태의 고점착 유화 아스팔트 혼합물의 마샬안정도와 간접인장강도는 폼드 아스팔트 혼합물보다 우수한 것으로 나타났다. 4시간 양생 후 고점착 유화 아스팔트 혼합물의 라벨링 현상은 폼드 아스팔트 혼합물보다 적게 발생하였다. 본 실내시험에 대한 반응특성으로부터 현장 상온 재생 아스팔트 포장을 위한 고점착 유화 아스팔트 혼합물은 폼드 아스팔트 혼합물보다 우수한 저항성과 라벨링 저항성을 발휘하는 것으로 평가되었다.
PURPOSES : The objective of this study is to evaluate the SDAR (solvent deasphaltene residue), which is obtained from the solvent deasphalting (SDA) process, as a pavement material. METHODS : The physical properties of the SDAR were evaluated based on its chemical composition, and asphalt mixtures with the SDAR were fabricated and used for the evaluation of mechanical properties. Firstly, the chemical composition of SARA (saturate, aromatic, resin and asphaltene) was analyzed using the TLC-FID (thin-layer chromatography-flame ionization detector). Moreover, the basic material properties of the asphalt binder with the SDAR were evaluated by the penetration test, softening point test, ductility test, and PG (performance grade) grade test. The rheological properties of the asphalt binder with the SDAR were evaluated by the dynamic shear modulus ($G^*$) obtained using the time-temperature superposition (TTS) principle. Secondly, the mechanical properties of the asphalt mixtures with the SDAR were evaluated. The compactibility was evaluated using the gyratory compacter. Moreover, the tensile strength ratio (TSR) was used for evaluating the moisture susceptibility of the asphalt mixtures (i.e., susceptibility to pothole damage). The dynamic modulus $E^*$, which is a fundamental property of the asphalt mixture, obtained at different temperatures and loading cycles, was used to evaluate the mechanical properties of the asphalt mixtures. RESULTS AND CONCLUSION : The SDAR shows stiffer and more brittle behavior than the conventional asphalt binder. As the application of the SDAR directly in the field may cause early failures, such as cracks on pavements, it should be applied with modifiers that can favorably modify the brittleness property of the SDAR. Therefore, if appropriate additives are applied on the SDAR, it can be used as a pavement material because of its low cost and strong resistance to rutting.
PURPOSES: This study is to evaluate the dynamic modulus changes of permeable asphalt mixtures by using non-destructive impact testing method and to compare the dynamic moduli of permeable asphalt mixtures through repeated freezing and thawing conditions. METHODS: For the study, non-destructive impact testing method is used in order to obtain dynamic modulus of asphalt specimen and to confirm the change of dynamic modulus before and after freezing and thawing conditions. RESULTS : This study has shown that the dynamic moduli of asphalt concrete specimens consisting of 10%, 15% and 20% porosity are reduced by 11.851%, 1.9564%, 24.593% after freezing and thawing cycles. CONCLUSIONS : Non-destructive impact testing method is very useful and has repeatability. Specimen with 15% porosity has high durability than others.
본 연구의 목적은 포장의 설계수명과 공용년수를 증대시켜 아스팔트 포장의 유지보수비용을 감소시킬 수 있는 장수명 아스팔트 포장용 고강성 혼합물을 개발하는데 있다. 따라서 본 연구에서는 고강성 아스팔트 바인더를 개발하였으며 다양한 실내 물성시험을 수행하였다. 실내 물성시험 결과 새롭게 개발된 고강성 아스팔트 바인더가 프랑스의 고강성 아스팔트 바인더와 유사하다는 것을 알 수 있었고, 바인더 외에 혼합물의 공용성을 평가하기 위해 기존의 일반아스팔트 혼합물과 새롭게 개발된 고강성 아스팔트 혼합물의 비교 시험을 수행하였다. 공용성 시험 결과 동탄성계수 측정시험에서는 고강성 아스팔트 혼합물이 일반 아스팔트 혼합물보다 강성에 있어 $5^{\circ}C$에서는 10~15%, $15^{\circ}C$에서는 20~25%, $30^{\circ}C$에서는 거의 2배가 증가함을 알 수 있었다. 또한 수분손상시험 및 휠트래킹시험, 피로시험을 수행한 결과 일반 아스팔트 혼합물에 비해 고강성 아스팔트 혼합물의 공용성이 우수한 것으로 평가되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.