• 한국지반환경공학회 논문집
• /
• 제24권2호
• /
• pp.13-24
• /
• 2023

Tunnels may undergo a larger or a smaller response compared with the free-field soil. In the pseudo-static procedure, the response of the tunnel is most often characterized by a curve that relates the racking ratio (R) with the flexibility ratio (F), where R represents the ratio of the tunnel response with respect to the free-field vibration and F is the relative stiffness of the tunnel and the surrounding soil. A set of analytical and empirical curves that do not account for the depth and the aspect ratio of the tunnel are typically used in practice. In this study, a series of dynamic analyses are conducted to develop a set of F-R_m relations for use in a frame analysis method. R_m is defined as an adjusted R where the rocking mode of deformation is removed and only the racking deformation is extracted. The numerical model is validated against centrifuge test recordings. The influence of aspect ratio, buried depth of tunnel on results is investigated. The results show that R_m increases with the increase of the buried depth and the aspect ratio. The widely used F-R relations are highlighted to be different compared with the obtained results in this study. Therefore, the updated F-R_m relations with proposed equations are recommended to be used in practice design. The rocking response decreases with either the decrease of the difference of stiffness between surrounding soil and tunnel or the larger aspect ratio of the tunnel section.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.53-58
• /
• 2022

Shape changes of hard mask play a key role in the aspect ratio dependent etch (ARDE). For etch process using high density and energy ions, deformation of hard mask shape becomes more severe, and high aspect ratio (HAR) etch profile is distorted. In this study, polygonal geometric model for shape-deformation of amorphous carbon layered hard mask is suggested to control etch profile during the process. Mask shape is modeled with polygonal geometry consisting of trapezoids and rectangles, and it provides dynamic information about angles of facets and etched width and height of remained mask shape, providing important features for real-time HAR etch profiling.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.21-30
• /
• 2002

Considering the present development situation of domestic apartment complexes, the development of environment-friendly apartment complexes is very important issue in Korea. At this point of time, it is very meaningful to understand the domestic development trend and the actual condition of environment-friendly apartment complexes and examine various problems about this and the possibilities fer development. Thus the purpose of this study is to accumulate basic data to establish planning direction and pertinent planning factors or the environment-friendly apartment complex for sustainable development. It is believed that the role of the related aspects such as administration, construction companies, designers and residents must be redefined in order to manage such problem. Planning factors for environment-friendly apartment complex should be developed systematically and more fit to the natural environment and residents in the aspect of district and community.

• 한국가정과교육학회지
• /
• 제13권3호
• /
• pp.147-160
• /
• 2001

The purpose of this study is to suggest one of teaching methods through developing a new guideline of the teaching-learning applied the Problem-Based Learning which is derived from the Constructionism. And then we apply this guideline to the class of Home Economics. especially the unit of the Consumption life for investigating the effect of this method in the aspect of improving man-power development as a consumer The results of this study are summarized as follows : First. the class applied a new method of Problem-Based Learning turn out to be more improved in the aspect of consumer consciousness than the untested class going through explanation-based teaching(P< .01). This is, the former result more positive than the latter because the former could be given chances to handle faced problems in class. Second there is no significant difference between the tested class and the untested class in the aspect of consumer skill. This is the fact that the research was conducted in a short Period of time and that the researcher failed to show the suitable stimulation or materials. even though the researcher was well aware of what Problem-Based Learning is. Third students\` evaluation after the test indicates that the tested class not only increase interest in home economics but also help them to take an active Part in class as the main of the class. and that the learning atmosphere is improved and that the effect of learning was also enhanced. Although the aspect of consumer skill is not statistically significant. the result show that adolescents try to Practice their learning from the class in their life.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.177-187
• /
• 2001

It is important to test and evaluate the variation degree of ship-mounted antenna radiated power with respect to all directions in order to use more effectively antennas that installed on naval ships. The naval ship has various sensors for navigation, communication and electronic warfare, etc. And the performance of these sensors extremely depends on the various characteristics of antenna system to transmit and receive electromagnetic wave. The radiated power pattern of the antenna differs from all aspect angles of the ship because of complex superstructures. It is important to know the weak point(direction) of antenna radiation for appropriate operation. Therefore, the ARP(Antenna Radiation Pattern) of shipboard antennas is measured for the all aspect angles. The results of ARP measurement are utilized as reference for antenna arrangement of newly-built same class warship. This study also describes the development results for the ARP measurement technique, software design and test procedures to measure the radiation pattern of communication equipment antennas using the fixed test site.

• 조명전기설비학회논문지
• /
• 제25권1호
• /
• pp.9-17
• /
• 2011

Development of high efficiency and eco-friendly LED source has been progressed continuously. Also, by nation's regulations, public institutions have changed existing luminaires to LED luminaires. However, there are several differences between existing luminaires and the intensity distribution of general planar LED luminaires. In case of changing existing luminaires to LED luminaires, by such differences, there are inefficiencies both quality aspect and energy aspect in luminous environment. Therefore, this study aims to conduct a study on the changes of intensity distribution and luminous environment by reflector shapes in indirect reflected LED luminaires with software for optical design of a luminaire (Photopia 2.0) and lighting design of a space (ReluxPro). This study shows the changes of intensity distribution and luminous environment of indirect reflected LED luminaires and indirect fluorescent lamp luminaires by reflector shapes.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.3-11
• /
• 2007

Nowadays, housing density in a city is getting higher, and this trend is expected to continue in the future. Therefore, Skyscraper is considered as future alternative architecture beyond symbolic meaning in aspect of demand and supply of urban land. However, skyscrapers which were newly built in Korea have many problems such as consumption of enormous amounts of energy, destruction of natural environment, and traffic jam. And from now on, environment-friendly development of skyscraper is urgently needed. However, plans or evaluation standards, which take account of the environment-friendly aspect of skyscraper, leave much to be desired. And especially it is hard to find environment-friendly skyscrapers. Therefore, this study aims to find realistic alternative solutions of environment-friendly skyscraper through analysis of the works of Ken Yeang who has been known as bio-climatic architect and tried to apply environment-friendly plans to skyscraper.

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.39-45
• /
• 2016

In this paper, we propose a log management service model for efficient developments of android applications. The proposed model consists of two major parts which are the log collector and the log manager service. The log collector can capture the log information of a target application without modifications, because the collector is composed by aspect-oriented programming. The collected logs are transformed to chunk of data, and the chunk of data is sent to the log management service. The log management service is an android service component and an independent application in another process. So, the log management service can reduce the workload of logging in the target application. Through a case study, we show that the proposed log management service model can reduce the log processing time compared to other models without modifications of a target application.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.567-570
• /
• 2006

The purpose of this study is to develope a linear feeder for uniform transportation of grains and to present its design guide line. so, It is measured the displacement of the front and rear aspect of the feeder in time domain. And the measured time signal is represented to the plane coordinate. From this process, it is presented the motion of the feeder in a harmonic excited condition. Also, It is determined whether translation motion or rotation motion. From these course, it is defined the optimized dynamic motion for uniform transportation of grains. It is included a ratio of the displacement and the angle which the dynamic motion between the front and rear aspect of the feeder.

• International Journal of Contents
• /
• 제8권3호
• /
• pp.42-51
• /
• 2012

Korea has entered into the Post Catching-up era and the necessity of new innovation strategy in response is being raised. This study argues the necessity of new innovation strategy and discusses the issue of co-ordination between R&D and Human Resource for that as the key factor. From empirical analysis, there seems to be restricted inflow of outstanding human resources to manufacturing sectors and lowering effectiveness of major even with the improved compatibility between major and job. Especially, it is severe in the industries with high R&D investment. It can be interpreted as an incoordination of the technological innovation efforts from the aspect of R&D investment with human resource utilization from the aspect of new human resource. The analytical result and interpretation suggests that there should be more active improvement on the co-ordination between innovative manufacturers' efforts and human resource utilization, in order to keep sustainable development.