• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.375-380
• /
• 2002

Tong-young LNG tank is a LNG storage tank of 140,000 kl, and it is composed of Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof. Generally, when concrete temperature arise, the complex thermal stress of inner and outer part can cause serious thermal crack and damage at structure. So in this paper, for the control of this thermal crack, we did the concrete mix design with the base of fly-ash 30% substitute at binder, and through the computer modelling at Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof, we studied the probability of thermal crack by thermal crack index.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.177-185
• /
• 2007

The purpose of this study is to evaluate freezing-thawing and surface scaling resistance in order to examine the frost durability of concrete in a chloride-inherent environment. The mixing design for this study is as follows: 3 water binder ratios of 0.37, 0.42, and 0.47; 2-ingredient type concrete (50% OPC concrete and 50% ground granulated blast-furnace slag), and 3-ingredient type concrete (50% OPC concrete, 15% fly ash, and 35% ground granulated blast-furnace slag). As found in this study, the decrease of durability was much more noticeable in combined deterioration through both salt damage and frost damage than in a single deterioration through either ofthese; when using blast-furnace slag in freezing-thawing seawater, the frost durability and surface deterioration resistance was evaluated as higher than when using OPC concrete. BF 50% concrete, especially, rather than BFS35%+FA15%, had a notable effect on resistance to chloride penetration and freezing/expansion. It has been confirmed that surface deterioration can be evaluated through a quantitative analysis of scaling, calculated from concrete's underwater weight and surface-dry weight as affected by the freezing-thawing of seawater.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.335-344
• /
• 2021

In structural engineering practice, understanding the performance of composite columns under extreme loading conditions such as high-rise bulding, long span and heavy loads is essential to accuratly predicting of material responses under severe loads such as fires or earthquakes. Hitherto, the combined effect of partial axial loads and subsequent elevated temperatures on the performance of hollow steel column filled fly ash concrete have not been widely investigated. Comprehensive test was carried out to investigate the effect of elevated temperatures on partial axially loaded square hollow steel column filled fly ash concrete as reported in this paper. Four batches of hollow steel column filled fly ash concrete ( 30 percent replacement of fly ash), (HySC) and normal concrete (CFHS) were subjected to four different load levels, n_f of 20%, 30%, 40% and 50% based on ultimate column strength. Subsequently, all batches of the partially damage composite columns were exposed to transient elevated temperature up to 250℃, 450℃ and 650℃ for one hour. The overall stress - strain relationship for both types of composited columns with different concrete fillers were presented for each different partial load levels and elevated temperature exposure. Results show that CFHS column has better performance than HySC at ambient temperature with 1.03 relative difference. However, the residual ultimate compressive strength of HySC subjected to partial axial load and elevated temperature exposure present an improvement compared to CFHS column with percentage difference in range 1.9% to 18.3%. Most of HySC and CFHS column specimens failed due to local buckling at the top and middle section of the column caused by concrete crushing. The columns failed due to global buckling after prolong compression load. After the compression load was lengthened, the columns were found to fail due to global buckling except for HySC02.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권12호
• /
• pp.691-697
• /
• 2017

백두산 및 한반도 주변의 화산재해에 의한 피해는 화산재에 의한 것으로 예상된다. 따라서 기 상장 상황에 따른 화산재 확산 상황을 컴퓨터 시뮬레이션을 통해서 예측하는데 정해진 시간 안에 계산을 끝내야 하므로 계산에 사용되는 소프트웨어들을 파이프라인 방식으로 병렬화하는 워크플로우가 제안되었다. 또한 화산재해의 특성 상 화산 폭발이 발생한 순간에도 시뮬레이션을 위한 정확한 파라미터 값이 정해지지 않으므로 여러 가지 가능한 조건의 시뮬레이션을 모두 수행해야 한다. 만일 이 중에 가장 가능성이 높은 조건의 계산을 먼저 수행할 수 있으면 화산재해에 대해 이를 토대로 일단 대응하고 후속 계산 결과에 의해 추후 보완하는 것이 가능해질 것이다. 그런데 이런 계산 들은 화산재해 피해예측 시스템의 제한된 성능의 계산 서버에서 수행되므로 계산 자원을 적절히 분배하는 일이 필요하다. 이를 위해서 기존에 제안되었던 파이프라인 기반의 워크플로우에 특정 데이터를 먼저 생성하는 기능을 추가하는 방안을 제안한다.

• Journal of Forest and Environmental Science
• /
• 제34권6호
• /
• pp.481-489
• /
• 2018

In this study, the succession and stand dimension attributes related to the disaster prevention function of Pinus thunbergii coastal forests were examined after damage from Diplodia tip blight. In 2015, 101 years after the Taisho eruption, field investigations were performed on the vegetation, soil thickness, and pH of surface soil of P. thunbergii coastal forests in western Sakurajima (Hakamagoshi plot) and Taisho lava flows in southeastern Sakurajima (Seto plot). The Hakamagoshi plot had more woody plant species with larger basal areas than that in the Seto plot. The mean age and height, maximal age and height of plant species, and H/D ratio were all larger in the Hakamagoshi plot than in the Seto plot. These results may be explained by the relatively smaller effect of volcanic ash and gas on forests in the Hakamagoshi plot compared to the Seto plot, resulting in a more suitable environment for many plant species. Although P. thunbergii coastal forests in Sakurajima are currently recovering from damages owing to Diplodia tip blight, there has not yet been a sufficient recovery compared to the results from a 1997 study. Furthermore, the results of assessment based on the H/D ratio and abundance of trees in P. thunbergii forests indicate that both regions are not yet effective in disaster prevention. Thus, it is necessary to establish Pinus trees, which can adjust to harsh environments like coastal areas and are resistant to volcanic ash and gas, to enhance the disaster prevention function of P. thunbergii coastal forests in volcanic regions. It may also be helpful to establish coastal forests with ectotrophic mycorrhizal fungi and organic matter coverage. Additionally, it is necessary to ensure the continuous maintenance of stand density and soil quality, and further develop efforts to prevent Diplodia tip blight and promote forest recovery.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.16-22
• /
• 2023

이 연구는 원전 콘크리트 배합설계를 모사한 콘크리트 시험체에 대하여 염수침지 실험을 수행하였으며, 시험체 깊이에 따른 염화물량과 XRF 성분의 상관관계를 분석하였다. 원전 콘크리트의 표면부의 염화물량은 염수 침지기간이 증가함에 따라 소폭 증가하였으나, 깊이 5.5 mm 이상의 콘크리트 시험체 내부 염화물량은 염수 침지기간이 증가함에 증가하는 경향이 뚜렷하게 나타났다. 콘크리트의 염화물량과 XRF 성분의 상관관계 분석결과, OPC 배합과 비교하여 FA가 20% 치환된 배합은 XRF 성분분석을 통한 Cl 이온의 구성비율과 염해저항성 평가결과의 상관관계가 매우 높게 나타났다. 이에 따라 FA가 20% 치환된 원전 콘크리트 배합에서는 반복적인 데이터 누적을 통해 XRF 성분분석을 통하여 염소이온분석 및 염해저항성능 평가가 가능함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.747-756
• /
• 2020

High-strength concrete (HSC) generally is made with high amount of cement which may release large amount of hydration heat at early age. The hydration heat will increase the internal temperature of slab and may cause potential cracking. In this study, slab specimens with a dimension of 600 × 600 × 100 mm were cast with concrete incorporating silica fume for test. The thermistors were embedded in the slabs therein to investigate the interior temperature development. The test variables include water-to-binder ratio (0.25, 0.35, 0.40), the cement replacement ratio of silica fume (RSF; 5 %, 10 %, 15 %) and fly ash (RFA; 10 %, 20 %, 30 %). Test results show that reducing the W/B ratio of HSC will enhance the temperature of first heat peak by hydration. The increase of W/B decrease the appearance time of second heat peak, but increase the corresponding maximum temperature. Increase the RSF or decrease the RFA may decrease the appearance time of second heat peak and increase the maximum central temperature of slab. HSC slab with the range of W/B ratio of 0.25 to 0.40 may occur cracking within 4 hours after casting. Reducing W/B may lead to intensive cracking damage, such as more crack number, and larger crack width and length.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.47-53
• /
• 2015

PURPOSES: The scaling of a concrete surface caused by the combined effects of frost and de-icing salts is one of the main reasons for the need to repair transportation infrastructures in cold-climate regions. This study describes the results of attempts to determine the scaling resistance of concrete incorporating mineral admixtures such as fly ash, GGBFS, and silica fume, and subjected to the actions of frost and salt. METHODS : Conventionally, to evaluate the fundamental properties of concrete, flexural and compressive strength measurements are regularly performed. Based on the ASTM C 672 standard, concrete is subjected to 2%, 4%, and 8% $CaCl_2$ salt solutions along with repeated sets of 50 freeze/thaw cycles, and the scaling resistance was evaluated based on the mass of the scale and a visual examination. RESULTS : It was observed that silica fume is very effective in enhancing the scaling resistance of concrete. Meanwhile, concrete incorporating GGBFS exhibited poor resistance to scaling, especially in the first ten freeze/thaw cycles. However, fly ash concrete generally exhibited the maximum amount of damage as a result of the frost-salt attack, regardless of the concentrations of the solutions. CONCLUSIONS: It can be concluded that the scaling resistance of concrete is highly dependent on the type of the mineral admixture used in the concrete. Therefore, to provide a durable concrete pavement for use in cold-climate regions, the selection of a suitable binder is essential.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.294-300
• /
• 1999

After researching the physical properties of the concrete included Rice Husk Ash(RHA concrete) and workability of fresh concrete admixed RHA, we have tested durability of RHA-concrete against freeaing and thawing in the winter using rapid freezing and thawing test method(KS F 2456) . There aretwo hypotheses to explain the failure mechanism of a freezing and thawing action. First, the hydraulic pressure in the pores of freezing concrete make an internal stress of concrete structures outbreaking micro crack in the face of concrete, Second, Frost action causing damage to cement paste repeatedly come from soil frost action, freezing water in the capillaries. Initial Relative Dynamic Modulus of Elasticity (DME) was biggest in cae of unit binder weight 600kgf/㎥ and relative dynamic modulus of elasticity increased until 300cycles. In general , initial relative DME was proportional to unit binder weight . Relative DME was decreased in proportion to unit binder weight in the case of 300, 400, 500kgf/㎥ , but relative DME fo the others remained more than 90% until 300 cycles. It was not good effect of intermixed RHA to concrete in case of below unit binder weight 300kgf/㎥ and the resistance of freezing and thawing was not good either.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.85-90
• /
• 2012

In this study, temperature profile of the fly ash concrete were studied in accordance with the change of heating curing method combination for the slab concrete in order to develop efficient protection method of the concrete subjected to $-20^{\circ}C$. The slab concretes with the size of $1200mm{\times}600mm{\times}200mm$ were fabricated with W/B of 50% and exposed to $-20^{\circ}C$ for 7 days. Five different combinations of heat curing methods were applied to the slab concrete specimen; two combinations of heat supplying by electrical heater and surface heat insulation material such as polyethylene film and quadrupled layer bubble sheet based on heat enclosure installment; three combinations of heating coil embedment and surface heat insulation materials such as polyethylene film, sawdust and quadrupled layer bubble sheet based on heat enclosure installment. Test results showed that by applying both heating coil and bubble sheet and heat enclosure, the concrete exposed to $-20^{\circ}C$ can be effectively protected from early-age frost damage.