• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.751-761
• /
• 2019

Mt. Baekdu, Mt. Aso, Mt. Sakurajima, Mt. Kikai and etc are distributed around the Korean Peninsula. Recently signs of eruption of Mt. Baekdu are increasing, raising concerns over possible damage to volcanic ash from seasonal winds during the winter eruption. Therefore, detailed procedures for investigation and countermeasures for volcanic ash spread and damage are required. But the standards for the warning and alarm signal of volcanic ash presented by Korea Ministry of Government Legislation are vague, with "when damage is expected" and "when serious damage is expected". In this study, to analyze the damage threshold and to apply the cases of overseas damage to the country, a survey was conducted on the establishment of domestic spatial information by public institutions with public confidence. As a result of the investigation of damage from volcanic ash overseas, the details of the damage cases were different depending on the type of life or income sources of each country. Therefore, instead of applying the volcanic ash damage cases abroad in Korea, spatial information analysis was performed to reflect domestic social and natural characteristics. In addition, we selected the areas to be considered in the event of volcanic ash damage in Korea. Finally, domestic volcanic ash damages should be classified as health, residential, road, railroad, aviation, power, water, agriculture, livestock, forest, and soil. When establishing the volcanic ash alarm optimized for Korea in the future, overseas volcanic ash damage cases and domestic spatial information construction in this study will be helpful in policy establishment.

• Structural Engineering and Mechanics
• /
• v.36 no.5
• /
• pp.643-667
• /
• 2010

The classical flexibility difference method detects damage by observing the difference of conventional deflection flexibility matrices between pre- and post-damaged states of a structure. This method is not able to identify multiple damage scenarios, and its criteria to identify damage depend upon the boundary conditions of structures. The key point behind the inability and dependence is revealed in this study. A more feasible flexibility for damage detection, the Angle-between-String-and-Horizon (ASH) flexibility, is proposed. The physical meaning of the new flexibility is given, and synthesis of the new flexibility matrix by modal frequencies and translational mode shapes is formulated. The damage indicators are extracted from the difference of ASH flexibility matrices between the pre- and post-damaged structures. One feature of the ASH flexibility is that the components in the ASH flexibility matrix are associated with elements instead of Nodes or DOFs. Therefore, the damage indicators based on the ASH flexibility are mapped to structural elements directly, and thus they can pinpoint the damaged elements, which is appealing to damage detection for complex structures. In addition, the change in the ASH flexibility caused by damage is not affected by boundary conditions, which simplifies the criteria to identify damage. Moreover, the proposed method can determine relatively the damage severity. Because the proposed damage indicator of an element mainly reflects the deflection change within the element itself, which significantly reduces the influence of the damage in one element on the damage indicators of other damaged elements, the proposed method can identify multiple damage locations. The viability of the proposed approach has been demonstrated by numerical examples and experimental tests on a cantilever beam and a simply supported beam.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1221-1233
• /
• 2019

Estimating damage in each sector that can be caused by volcanic ash deposition, is very important to prepare the volcanic ash disaster. In this study, we showed predicted-Korean-volcanic-ash damage of each sector by using volcanic ash diffusion simulation and spatial-data-based volcanic ash damage sector in previous study. To this end, volcanic ash related base maps were generated by collecting and processing spatial information data. Finally, we showed Korean-volcanic-ash-deposition damages by sector using the collected Mt. Aso volcanic ash scenarios via overlapping analysis. As a result, volcanic-ash-related damages were expected to occur in the 162 and 134 districts for each Aso volcanic ash scenarios, since those districts exceeds the minimum volcanic ash damage criterion of 0.01 mm. Finally, we compared possible volcanic ash damages by sectors using collected and processed spatial data, after selecting administrative districts(Scenario 190805- Kangwon-do, Kyungsangbuk-do; Scenario 190811-Chuncheon-si, Hongcheon-si) with the largest amount of volcanic ash deposition.

• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.536-549
• /
• 2013

This study investigates the damages of and analyzes the social and economic impacts of volcanic ash eruptions in the world in order to estimate the potential volcanic ash impacts in South Korea when Mt. Baekdusan volcano erupts in the future. First, we build a comparison chart called "the impact of volcanic ash" on each economic and social sector by using major volcanic eruptions and we compare the damage with respect to volcanic ash thickness/weights. Secondly, we analyze the social and economic impact from volcanic ash. The economic damage is not likely to occur in South Korea, unless Mt. Baekdusan erupts in winter. However, the potential damage should not be overlooked because the volcanic ash may have a global impact around the world. If Mt. Baekdusan volcano erupts when the wind blows from north or northeast, the volcanic ash may then significantly affect South Korea of which economy is highly dependent on exports. Particularly when the volcanic ash moves to the densely populated metropolitan areas or agricultural areas, the damage can be significant. In preparation for the potential volcanic disasters, the volcanic ash forecast table suitable for South Korea should be prepared. In addition, building a Korean volcanic ash hazard map in advance will have a strategic significance.

• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.524-535
• /
• 2013

Catastrophe risk models require the damage functions of each vulnerable item in inventory to estimate volcanic ash losses. The damage functions are used to represent the relation between damage factors and damage and also widely used in engineering and natural hazard studies to calculate the vulnerability. In most cases, damage functions are constructed as fragility or vulnerability curves, and researchers are confused by the similarities between them particularly when they perform interdisciplinary research. Thus, we aim to explain the similarities and differences between fragility and vulnerability curves and their relationship by providing case studies to construct them. In addition, we suggest a simple method to construct the damage functions between damage ratio and volcanic ash thickness using limited damage data. This study comes from the fact that damage functions are generally constructed using damage data. However, there is no available volcanic ash damage data in Korea, and not even enough volcanic disaster data to construct damage functions in the world, compared to other hazards. Using the method suggested in the study and the limited damage data from Japan and New Zealand, we construct Weibull-type functions or linear functions dependent of available data to calculate volcanic ash loss estimation, which we think need to be corrected to make it more suitable for inventory characteristics and environmental conditions in Korea.

• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.515-523
• /
• 2013

The eastern coast of South Korea is expected to be damaged by volcanic ash when Mt. Baekdusan volcano erupts. Even if the amount of volcanic ash is small, it can be fatal on the agricultural sector withering many plants and causing soil acidification. Thus, in this paper, we aim to estimate agricultural losses caused by the volcanic ash and to visualize them with Google map. To estimate the volcanic ash losses, a damage assessment model is needed. As the volcanic ash hazard depends on the kind of a crops and the ash thickness, the fragility function of damage assessment model should represent the relation between ash thickness and damage rate of crops. Thus, we model the fragility function using the damage rate for each crop of RiskScape. The volcanic ash losses can be calculated with the agricultural output and the price of each crop using the fragility function. This paper also represents the estimated result of the losses in Gangwon province, which is most likely to get damaged by volcanic ashes in Korea. According to the result with gross agricultural output of Gangwon province in 2010, the amount of volcanic ash losses runs nearly 635,124 million wons in Korean currency if volcanic ash is accumulated over four millimeters. This amount represents about 50% of the gross agricultural output of Gangwon province. We consider the damage only for the crops in this paper. However, a volcanic ash fall has the potential to damage the assets for a farm, including the soil fertility and installations. Thus, to estimate the total amount of volcanic ash damage for the whole agricultural sectors, these collateral damages should also be considered.

• Earthquakes and Structures
• /
• v.22 no.2
• /
• pp.121-135
• /
• 2022

Many public buildings such as schools, hospitals, etc., where partial infill walls are present in reinforced concrete (RC) structures, have undergone undesirable damage/failure attributed to captive column effect during a moderate to severe earthquake shaking. Often, the situation gets worsened when these RC frames are non-ductile in nature, thus reducing the deformable capability of the frame. Also, in many parts of the Indian subcontinent, it is mandatory to use fly-ash bricks for construction so as to reduce the burden on the disposal of fly-ash produced at thermal power plants. In some scenario, when the non-ductile RC frame, partially infilled by fly-ash bricks, suffers major structural damage, the challenge remains on how to retrofit and restore it. Thus, in this study, two full-scale one-bay, one-story non-ductile RC frame models, namely, bare frame and RC partially infilled frame with fly-ash bricks in 50% of its opening area are considered. In the previous experiments, these models were subjected to slow-cyclic displacement-controlled loading to replicate damage due to a moderate earthquake. Now, in this study these damaged frames were retrofitted and an experimental investigation was performed on the retrofitted specimens to examine the effectiveness of the proposed retrofitting scheme. A hybrid retrofitting technique combining epoxy injection grouting with an innovative and easy-to-implement steel jacketing technique was proposed. This proposed retrofitting method has ensured proper confinement of damaged concrete. The retrofitted models were subjected to the same slow cyclic displacement-controlled loading which was used to damage the frames. The experimental study concluded that the hybrid retrofitting technique was quite effective in enhancing and regaining various seismic performance parameters such as, lateral strength and lateral stiffness of partially fly-ash brick infilled RC frame. Thus, the steel jacketing retrofitting scheme along with the epoxy injection grouting can be relied on for possible repair of the structural members which are damaged due to the captive column effect during the seismic shaking.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.3
• /
• pp.73-81
• /
• 2003

In this paper, salt damage resistance of high durable concrete was tested. High durable concrete was made by using low water cement ratio, chemical admixture called super-durable admixture and mineral admixtures such as fly-ash, ground granulated blast-furnace slag, silica fume. Two kinds of salt damage resistance test were carried out. One method is chloride ion penetration test(ASTM C1202), and the other one is depth of chloride penetration test in saline solution. Test results were as followers: 1) The depth of chloride ion penetration increased exponentially as water cement ratio was increased and time passed. 2) Super-durable admixture had little effect on the improvement of salt damage resistance of concrete. 3) Silica fume and ground granulated blast-furnace slag were effective on salt damage resistance because of pozzolanic reaction, but fly-ash had a little effect.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.259-266
• /
• 2018

The purpose of this study is to establish the management standards of water systems in Korea. The damage factors of the water systems were classified by accumulation, adsorption, and abrasion. According to the thickness of volcanic ash, the management stage of the water systems was derived in four steps; VAD (Volcanic Ash Degree) I (0~1 mm), II (1~3 mm), III (3~5 mm), IV (over 5 mm). Finally, the management standards for water systems which consist of alarm levels, impacts of volcanic ashes, procedures and action plan to deal with the damage, are presented.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.225-229
• /
• 2003

Plant ash and soil drainage, derived by frequent mountain fires during winter, might cause biological contamination to seaweeds at seashore and river mouse area. To thalli of Ulva pertusa, maximum non-lethal concentration(MNLC), lethal concentration 50 $(LC_{50})$ and minimum lethal concentration (MLC) of pine needle ash were shown as 60, 350 and 550 mg/mL, respectively. The yellow loess and granite sand did not damage at concentrations of 20 and 200 mg/mL, respectively To thalli of Porphyra yezoensis, the MNLC, LC5O, MLC of pine needle ash were shown as 0.08, 0.4 and 1.0 mg/mL, respectively. Effects of yellow loess and granite sand were approximately 1/2 and 1/10 of the ash. To thalli of Undaria pinnatifida, the pine needle ash, yellow loess and granite sand did not damage at the concentration range of 20 to 40 mg/mL. Change of pigments $(chlorophyll\;\alpha,\;lutein,\;\beta-carotene,\;phycoerthrin)$ was also determined at the MNLC, $LC-{50}$ and MLC of pine needle ash. Among three seaweeds tested, P. yezoensis produced the most 2.7-fold of lutein and 2.3-fold of $\beta-carotene$ at $LC-{50}$ of the ash. Thus the P. yezoensis, appeared as a sensitive indicator, could be used as one of test organisms for determination of the biological effect of pollutants contaminated in marine environment.