• 생명과학회지
• /
• 제19권10호
• /
• pp.1368-1373
• /
• 2009

본 연구는 미국 유타주에 거주하는 10-15세 어린이와 청소년들의 허리둘레가 electronic pedometer (전자 보수계)의 타당성과 신뢰성에 미치는 영향을 분석하기 위하여 비만집단 10명(HWC, BMI $28.91\pm3.07$)과 일반집단 10명 (LWC, BMI $18.05\pm1.55$)으로 총 20명(14 Hispanic and 6 Caucasian)의 어린이와 청소년들을 대상으로 실시하였다. Electronic pedometer 의 신뢰성을 측정하기 위하여 각 어린이는 Yamax SW-701 electronic pedometer 를 허리에 차고 15계단 오르기와 15계단 내리기를 3 sets 실시한 결과, HWC 집단이 LWC 집단보다 더 많은 보수를 기록했으나 오르기와 내르기 시행의 주 효과는 유의한 차이가 없었고, 또 두 집단간의 상호작용에도 유의한 차이가 없었다. 보수를 측정하여 pedometer의 타당성에 허리둘레가 미치는 영향을 분석하기 위하여 각자의 보행 속도에 따라 400 m를 걷게 한 결과 주 효과는 두 집단 간에 유의한 차이가 있었으나 counting technique (hand-counted vs. pedometer counted)의 주 효과는 유의한 차이가 없었으며, 또 400 m 걷기의 시기와 group별 시기의 상호작용도 유의한 차이가 없었다. 이러한 결과는 pedometer가 walking steps 측정에 HWC 집단과 LWC 집단에 동일하게 타당도가 있음을 나타내고 있다. 추후의 연구에서는 어린이들의 walking speed, pedometer tilt angle, leg length, 및 stride length 등을 고려한 연구가 필요하다고 사료된다.

• PNF and Movement
• /
• 제20권2호
• /
• pp.189-201
• /
• 2022

Purpose: The purpose of this study was to investigate the effect of McConnell taping and Kinesio taping on pain and lower extremity joint angles when patients with patellofemoral pain syndrome (PFPS) ascend stairs. Methods: Fifty young adults who were experiencing anterior knee pain due to PFPS were selected as participants. Then, 25 patients were randomly assigned to the McConnell taping group and 25 to the Kinesio taping group. Pain and lower extremity joint angle were measured while ascending stairs before and after the intervention. A paired t-test was performed to evaluate the amount of change in the parameter values after the intervention within the groups, and an independent t-test was used to compare the results of the groups. Results: In the within-group comparisons, a statistically significant difference was found in both groups between the anterior knee pain scale scores recorded before and after the intervention (p < 0.05). A statistically significant difference was also found between the groups (p < 0.05). Comparison of the lower extremity joint angles at initial contact, loading response, terminal stance, and pre-swing within the groups showed that there were statistically significant differences in the hip, knee flexion, abduction, lateral rotation, and dorsiflexion angles in both the McConnell and Kinesio taping groups (p < 0.05). There was also a statistically significant difference in all angles between the groups during the following events (p < 0.05): (1) at initial contact, (2) at loading response (except hip flexion angle), (3) at terminal stance (except hip flexion and lateral rotation angles), and (4) at pre-swing (except hip, knee abduction, and inversion angles). Conclusion: McConnell taping and Kinesio taping both effectively improved the occurrence of knee pain and the lower extremity joint angles during stair ascent in patients with PFPS. However, McConnell taping had a significant impact on pain reduction and lower extremity joint angles compared to Kinesio taping.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.138-141
• /
• 2003

Recently reinforcement learning has attracted attention of many researchers because of its simple and flexible learning ability for any environments. And so far many reinforcement learning methods have been proposed such as Q-learning, actor-critic, stochastic gradient ascent method and so on. The reinforcement learning system is able to adapt to changes of the environment because of the mutual action with it. However when the environment changes periodically, it is not able to adapt to its change well. In this paper we propose the reinforcement learning system that is able to adapt to periodical changes of the environment by introducing the time-varying parameters to be adjusted. It is shown that the proposed method works well through the simulation study of the maze problem with aisle that opens and closes periodically, although the conventional method with constant parameters to be adjusted does not works well in such environment.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.181-187
• /
• 2017

Objective: The aim of the study was to compare & analyze on the variations of ground reaction force during ascending and descending of bus stair. Method: Simulated wooden stair of bus (raiser: 37.66 cm, width: 109 cm, tread: 29 cm) and GRF system (AMTI-OR-7/ AMTI., USA) was set up within experimental room. Adult female (n=8) performed ascending & descending of simulated bus stair, and variables analyzed consisted of TT (transfer-time), PVF (peak vertical force), LR (loading rate), DR (decay rate), CV (coefficient of variation) and AI (asymmetry index). Sample data from GRF cut off at 1,000 Hz. Results: TT showed shortest variation at phase 1 during descending, but longest variation at phase 1 during ascending of stair. PVF19 (Fz2, 100%) showed large pattern during descending than that of ascending, but rather showed small pattern during ascending of stair in case of PVF2 (Fz4). LR showed larger pattern during descending than that of ascending, but rather during ascending of stair in case of DR. Variation of CV (%) did not show difference between LR and DR, but showed higher possible occurrence of variation during descending of stair. Also AI (%) showed higher index during ascending than that of descending of stair. Conclusion: Because introduction of lowered bus stair has various realistic problems, if lined up at designated bus stopage exactly, rather can solve problems of inconvenience, reduce impulsive force and secure a stability of COG during ascending & descending of stair.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.376-381
• /
• 2015

Transmission characteristics of long-period fiber gratings (LPFGs) fabricated by periodically etching a conventional single-mode fiber (SMF) are investigated. After coating the SMF with photoresist, the cladding of the SMF is symmetrically and periodically removed by using a wet etching technique resulting in the formation of the LPFG. Tensile strain reinforces the coupling strength between the core and the cladding mode based on the photoelastic effect. The extinction ratio of the SMF-based LPFG at a wavelength of 1550.8 nm is measured to be -15.1 dB when the applied strain is $600{\mu}{\varepsilon}$. The ascent of ambient index shifts the resonant wavelength to shorter wavelength because of the increase of the effective refractive index of the cladding mode. The extinction ratio is diminished by increase in the ambient index because of the induction of the optical attenuation of the cladding mode. The transmission characteristics of the proposed LPFG with variations in torsion are also measured. The photoelastic effect based on torsion changes the extinction ratio and the resonant wavelength of the proposed SMF-based LPFG. The polarization-dependent loss of the LPFG is also increased by torsion because of the torsion-induced birefringence. The polarization-dependent loss of the LPFG at torsion of 8.5 rad/m is measured to be 3.9 dB.

• 한국학교보건학회지
• /
• 제17권2호
• /
• pp.115-126
• /
• 2004

Purpose: The aim of the study is to provide information about selecting school sites for new schools in congested urban areas and to propose a method to manage harmful environments around primary and secondary schools. Method: Four schools were selected around Gilum New Town and Ilsan City. The problems were identified by counting the businesses classified as harmful and prohibited in a school zone through surveying, collecting reports from relevant sources, and asking questions of authorities in school districts. Results: It was found that many harmful businesses prohibited by the Law of School Health were present in the safe zone of schools in both Ilsan city and Gilum New Town. The school site of Bohyun Elementary School was classified as poor because there was a steep ascent at the entrance and the school was surrounded by a dangerous, steep boundary. We suggested that an education and environment assessment system by completed before the school site was selected. Conclusion: There is a urgent need to improve the approval and permission process of harmful businesses as well as regulatory standards of school site selection in the light of the shortage of land.

• 한국의상디자인학회지
• /
• 제7권2호
• /
• pp.121-135
• /
• 2005

From a social psychological perspective, Make-up is an tool for run a lot smoother and perform communication efficiently. Many people give a turn to hair color through dyeing form due to yearning to change individual image through the image which the color is having. This paper study how make-up behavior, hair color and self-consciousness will affect the Level of Expected social-psychological effect of College Girl Students. In the sense of make-up behavior, according to result, a group of make-up behavior of self-satisfaction-oriented the level of expected social-psychological effect higher than a group of make-up behavior of tradition-oriented. Hair colors doesn't seem to be having much effect on the level of expected social- psychological effect, but have been shown to influence make-up behavior and self-consciousness. On the self-consciousness, a group of high self-consciousness the level of expected social-psychological effect higher than a group of low or fair self-consciousness. They doesn't have much effect passive expected effect as 'complement of self insufficiency' or 'a person consciousness' But they are affect active expected effect as 'the pleasure of change' and 'positive ascent'.

• Journal of Microbiology and Biotechnology
• /
• 제20권4호
• /
• pp.835-843
• /
• 2010

The objectives of this study were to investigate the effect of fermentation medium on the hydroxyl radical scavenging activity of exopolysaccharides from Inonotus obliquus by response surface methodology (RSM). A two-level fractional factorial design was used to evaluate the effect of different components of the medium. Corn flour, peptone, and $KH_2PO_4$ were important factors significantly affecting hydroxyl radical scavenging activity. These selected variables were subsequently optimized using path of steepest ascent (descent), a central composite design, and response surface analysis. The optimal medium composition was (% w/v): corn flour 5.30, peptone 0.32, $KH_2PO_4$ 0.26, $MgSO_4$ 0.02, and $CaCl_2$ 0.01. Under the optimal condition, the hydroxyl radical scavenging rate (49.4%) was much higher than that using either basal fermentation medium (10.2%) and single variable optimization of fermentation medium (35.5%). The main monosaccharides components of the RSM optimized polysaccharides are rhamnose, arabinose, xylose, mannose, glucose, and galactose with molar proportion at 1.45%, 3.63%, 2.17%, 15.94%, 50.00%, and 26.81%.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.613-623
• /
• 2002

Ascent trajectory optimization and explicit guidance problems for a satellite launch vehicle with yaw maneuver in a 3-dimension are considered. The trajectory optimization problem with boundary conditions is formulated as a nonlinear programming problem by parameterizing the inertial pitch and yaw attitude control variables, and is solved by using the SQP algorithm. The flight constraints such as gravity-turn and range safety conditions are imposed. An explicit inertial guidance algorithm in the exoatmospheric phase is also presented. The guidance algorithm provides steering command and time-to-go value directly using the current states of the vehicle and the desired orbit insertion conditions. The liquid propelled Delta 2910 launch vehicle is used as a numerical model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.224-227
• /
• 2007

This paper introduces the results of acoustic loads test conducted on the upper stage assembly of KSLV-I, which is the first Korea space launch vehicle. A launch vehicle and its payloads are subjected to severe acoustic pressure loading when they lift off and ascent during the transonic periods. Acoustic loadings are spreaded out broad frequncy-spectrum up to 10,000Hz. Acoustic loads are a primary source of structural random vibration of the upper stage and payloads. Therefore, in order to verify the structural integrity of the upper stage assembly of KSLV-I and the survivability of its components under severe random vibration environment, acoustic loads test is conducted in the high intensity acoustic chamber with 142dB (overall SPL). The results show the structural design and component random vibration specifications well meet with the environmental requirements.