• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.282-290
• /
• 1997

The sorption and desorption properties of U(VI), Th(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zn(II), Cd(II) and Mn(II) ions on XAD-16-[4-(2-thiazolylazo)orcinol] (TAO) chelating resin were studied by elution method. The effect was examined with respect to overall capacity of each metal ion, separation of mixed metal ions, flow rate and concentration of buffer solution for optimum condition of sorption. The overall capacities of some metal ions on this chelating resin were 0.35nmol U(VI)/g resin, 0.49nmol Th(IV)/g resin, 0.41nmol Cu(II)/g resin, and 0.31nmol Zr(IV)/g resin, respectively. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 5.0 was Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Mn(II)>Cd(II). The group separation of mixed metal ions was possible by increasing pH in pH range 2~5 at a flow rate of 0.28mL/min. Characteristics of desorption were investigated with desorption agents such as $HNO_3$, HCl, $HClO_4$, $H_2SO_4$, and $Na_2CO_3$. It was found that 2M $HNO_3$ showed high desorption efficiency to most of metal ions except Zr(IV) ion. Also, desorption and recovery of Zr(IV) ion were successfully performed with 1M $H_2SO_4$. Recovery of trace amount of U(VI) ion from artificial sea water was over 94%. The chelating resin, XAD-16-TAO was successfully applied to group separation of rare earth metal ions from U(VI) by using 2M $HNO_3$ as an eluent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.195-201
• /
• 2014

Body fluid has been studied for diverse fields like Ringer's solutions, artificial joint fluids, cell growth culture media because it plays a crucial role in controlling body temperature and acts as a solvent for diverse metabolite processes in the body and delivery media of mineral, energy source, hormone, signal and drug from and to cell via blood or lymphatic vessel by osmotic pressure or active uptake. Stratum corneum containing extracellular lipids and NMF (natural moisturizing factor) absorbs atmospheric water residing outside of cells and utilize it to hydrate inside of their own. This process is related to skin barrier function. In this study, we conducted the cell viability test with Cell Bio Fluid $Sync^{TM}$, which mimicks body fluids including amino acids, peptides, and monosaccharides to strengthen skin barrier, and the clinical skin improvement test with cosmetics containing Cell Bio Fluid $Sync^{TM}$. In the cell viability test, HaCaT cell was treated with PBS for 3 hours, followed by the treatment of a cell culture medium (DMEM) and isotonic solution (PBS) and Cell Bio Fluid $Sync^{TM}$ for 3 hours each. Then, MTT assay and image analysis were conducted. In the clinical skin improvement test, twenty-one healthy women participated. Participants applied cosmetics containing Cell Bio Fluid $Sync^{TM}$ on their face for a week and evaluated the skin hydration, skin roughness, brightness and evenness. All measurements were conducted after they washed off their face and took a rest under the constant temperature ($22{\pm}2^{\circ}C$) and constant humidity conditions ($50{\pm}5%$) for 20 minutes. All the data were analyzed by SPSS (version 21) software program. Results showed that Cell Bio Fluid $Sync^{TM}$ improved both the cell viability and in vivo skin conditions such as skin hydration, roughness, brightness and evenness.

• Journal of Chest Surgery
• /
• v.37 no.4
• /
• pp.297-306
• /
• 2004

Current artificial heart valves have several disadvantages, such as thromboembolism, limited durability, infection, and inability to grow. The solution to these problems would be to develop a tissue-engineered heart valves containing autologous cells. The aim of this study was to optimize the protocol to obtain a porcine acellular matrix and seed goat autologous endothelial cells on it, and to evaluate the biological responses of xenograft and xeno-autograft heart valves in goats. Material and Method: Fresh porcine pulmonic valves were treated with one method among 3 representative decellularization protocols (Triton-X, freeze-thawing, and NaCl-SDS). Goat venous endothelial cells were isolated and seeded onto the acellularized xenograft leaflets. Microscopic examinations were done to select the most effective method of decellularizing xenogeneic cells and seeding autologous endothelial cells. Two pulmonic valve leaflets of. 6 goats were replaced by acellularized porcine leaflets with or without seeding autologous endothelial cells while on cardiopulmonary bypass. Goats were sacrificed electively at 6 hours, 1 day, 1 week, 1 month, 3 months, and 6. months after operation. Morphologic examinations were done to see the biological responses of replaced valve leaflets. Result: The microscopic examinations showed that porcine cells were almost completely removed in the leaflets treated with NaCl-SDS. The seeded endothelial cells were more evenly preserved in NaCl-SDS treatment. All 6 goats survived the operation without complications. The xeno- autografts and xenografts showed the appearance, the remodeling process, and the cellular functions of myofibroblasts, 1 day, 1 month, and 3 months after operation, respectively. They were compatible with the native pulmonary leaflet (control group) except for the increased cellularity at 6 months. The xenografts revealed the new endothelial cell lining at that time. Conclusion: Treatment with NaCl-SDS was most effective in obtaining decellularized xenografts and facilitate seeding autologous endothelial cells. The xenografts and xeno-autografts were repopulated with myofibroblasts and endothelial cells in situ serially. Both of grafts served as a matrix for a tissue engineered heart valve and developed into autologous tissue for 6 months.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.653-660
• /
• 2006

Fuji VII is a glass-ionomer cement specially targeted for early protection in erupting first and second molars. Properties of Fuji VII such as very high level of fluoride release, low viscosity and no need to preliminarily etch the substrate would be useful to erupting molars with primary pit and fissure caries or hypoplastic area for preventive goal or remineralization. The purpose of this study were to evaluate remineralization of Fuji VII glass ionomer cement and to compare with one of other restorative materials such as conventional glass ionomer cement, resin-modified glass ionomer cement, compomer and composite resin. Forty-two extracted human molars were used for this study. All teeth were immersed in demineralizing solution for 48 hours after Class V cavity preparation was made on sound proximal surface. The teeth were randomly divided into six groups and restored with Fuji VII, Fuji II, Fuji II LC improved, F2000, $Filtek^{TM}$ Z250 and control group was unrestored. The middle area with $130{\pm}20{\mu}m$ thickness was separated from specimen using microtome and demineralized area was photographed under polarized microscope. Separated area was relocated to specimen and stored in artificial saliva, After four weeks, changes of demineralized area were observed and compared to them restorated immediately. The results from the this study can be summarized as follows ; 1. Fuji VII, Fuji II, Fuji II LC improved have more prominent remineralization effect than F2000, $Filtek^{TM}$ Z250, control group. 2. No significant differences in remineralization effect are seen between Fuji VII and Fuji II, Fuji II LC improved.

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.445-453
• /
• 2011

Objectives : The purpose of this study was to determine of fluoride-releasing of orthodontic resin cements containing fluoride and compare decalcification of tooth attached fluoride and non-fluoride resin cements. Methods : Total eighty premolar tooth were used in this study. Forty tooth were used for fluoride releasing measurement and forty tooth were used for decalcification measurement. Each forty tooth were randomly divided into four groups, and brackets were attached on tooth surface with Blugloo, Light Bond, Orthofolw(experimental groups) and Transbond cement(control group). After brackets were attached on tooth surface, forty tooth were immersed in artificial salival and then the quantity of fluoride releasing was measured ever day for 8days and then three-days intervals for 3 weeks. Forty tooth were immersed in decalcification solution for 48hours and then degree of decalcification was measured as lesion area, ${\Delta}F$, and ${\Delta}Q$ using QLF. The data were analysed by one-way ANOVA and Pearson's correlation coefficient using SPSS 12.0 program. Results : Fluoride release of experimental groups was higher than control group(p<0.05). Cumulative fluoride release of experimental groups was also higher than control group(p<0.05). There were the highest release during first day. ${\Delta}F$, and ${\Delta}Q$ was high TB > BG > OF > LB (p<0.05). Change of ${\Delta}F$, and ${\Delta}Q$ was also high TB > BG > OF > LB (p<0.05). As for correlation between fluoride release and lesion area, ${\Delta}F$, and ${\Delta}Q$ showed negative correlation but there was no significant difference. Conclusions : This study shows that orthodontic reins cements containing fluoride release fluoride and prevent initial enamel decalcification caused by orthodontic treatment.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2014

Purpose: The present study was aimed to figure out the correlation amongst the evaluation methods for critical micelle concentration, surface tension and protein cleaning efficacy to evaluate cleaning efficacy of contact lens care products. Methods: The critical micelle concentration of surfactants and the actual concentration of surfactants in contact lens care solutions were investigated by employing references published and related information. Surface tension of contact lens care solutions was measured by surface tension device at $25{\pm}1^{\circ}C$, and contact lenses made of lotrafilcon A, comfilcon A and balafilcon A were washed with contact lens care solutions after the incubation in artificial tears for 14 days and their cleaning efficacy was compared. Results: Among the 22 contact lens care products, 9 products provided the label of the concentration of surfactant, and 7 products showed higher concentration of surfactant than the critical micelle concentration reported in references. As a result of measuring surface tension, the surface tension of lens care products for soft contact lens was generally lower than other care products. When examined the removal effect of protein deposited on lens surface, it was known that the care products having lower surface tension showed higher protein removal efficiency. Conclusions: The surface tension is low when surfactant concentration in contact lens care solutions is high, and the removal effect of protein deposited is accordingly increased with the decrease of surface tension. Thus, these indicate the correlation amongst the evaluation methods for cleaning efficacy.

• Korean Journal of Animal Reproduction
• /
• v.26 no.1
• /
• pp.9-16
• /
• 2002

This study was carried out to investigate the effects of extenders such as Beltsville thawing solution(BTS), Modena and Androhep, preservation temperature and period of liquid boar semen on semen characteristics and reproductive performance. Boars were raised at Swine Artificial Insemination Center in National Livestock Research Institute, Sunghwan, Chungnam, Korea. This experiment was carried out from 1995 to 2000. The results obtained were summarized as follows. 1. Sperm motility in the samples with Androhep and BTS reduced from day 5 and in the samples with Modena reduced from day 3 of storage. pH or 3 extenders varied from 6.24 to 7.04 during day 1 to 5 of storage. Farrowing rate of sows inseminated with liquid boar semen offended with BTs, Modena and Androhep extenders did not show any differences until day f after semen collection. Sows inseminated with Androhep extender had better farrowing rates (P＜0.05) than those with Modena extender at day 1 or 5 after semen collection, but farrowing rates after AI using BTS did not differ compared to those Androhep and Modena. Litter size did not show any differences among the three extenders, but Androhep had the decreased litter size from day i of storage. 2. Motility and normal acrosome of the sperm preserved at 5$^{\circ}C$ did not show any differences until day 4 of storage, but those at 17$^{\circ}C$ changed from day 3 and 4, respectively. Farrowing rate of sows artificially inseminated with liquid boa. semen preserved at 17$^{\circ}C$ had higher, than at 5$^{\circ}C$ (p＜0.05), but there was no significant differences in litter size. Farrowing rates and litter size were decreased from day 2 and day 3 of storage at 17$^{\circ}C$, respectively. Farrowing rate of sows inseminated with the preserved semen at 5$^{\circ}C$ did not changed until day 4, but the litter size at 5$^{\circ}C$ was lower than that at 17$^{\circ}C$.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.364-372
• /
• 1996

The sorption and desorption properties of U(VI), Th(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zn(II), Cd(II) and Mn(II) ions on XAD-16-[2-(2-thiazolylazo)-p-cresol](TAC) chelating resin were studied by elution method for selective separation, concentration and recovery of trace metal ions in sea water. The optimum conditions for the sorption of metal ions were examined with respect to flow rate, pH and concentration of buffer solution. The overall capacities of some metal ions on this chelating resin were 0.41mmol U(VI)/g resin, 0.55mmol Th(IV)/g resin, 0.43mmol Cu(II)/g resin, and 0.32mmol Zr(IV)/g resin, respectively. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 5.0 was found as Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Cd(II)>Mn(II). Desorption of characteristics for metal ions were investigated with desorption agents such as $HNO_3$, HCl, $HClO_4$, $H_2SO_4$, and $Na_2CO_3$. It was found that most of metal ions except Zr(IV) showed high desorption efficiency with 2M $HNO_3$. But, desorption and recovery of Zr(IV) ion were successfully performed with 1M $H_2SO_4$. The resin was applied for separation and preconcentration of trace amount of U(VI) ion from artificial sea water and the recovery of U(IV) was over 96%.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2020

Mycorrhiza refers to the association between a plant and a fungus colonizing the cortical tissue of the plant's roots during periods of active plant growth. The benefits afforded by plants from mycorrhizal symbioses can be characterized either agronomically, based on increased growth and yield, or ecologically, based on improved fitness (i.e., reproductive ability). In either case, the benefit accrues primarily because mycorrhizal fungi form a critical linkage between plant roots and the soil. The soilborne or extramatrical hyphae take up nutrients from the soil solution and transport them to the root. This mycorrhizae-mediated mechanism increases the effective absorptive surface area of the plant. There are seven major types of mycorrhizae along with mycoheterotrophy: endomycorrhizae (arbuscular mycorrhizae, AM), ectomycorrhizae (EM), ectendomycorrhizae, monotropoid, arbutoid, orchid, and ericoid. Endomycorrhizal fungi form arbuscules or highly branched structures within root cortical cells, giving rise to arbuscular mycorrhiza, which may produce extensive extramatrical hyphae and significantly increase phosphorus inflow rates in the plants they colonize. Ectomycorrhizal fungi may produce large quantities of hyphae on the root and in the soil; these hyphae play a role in absorption and translocation of inorganic nutrients and water, and also release nutrients from litter layers by producing enzymes involved in mineralization of organic matters. Over 4,000 fungal species, primarily belonging to Basidiomycotina and to a lesser extent Ascomycotina, are able to form ectomycorrhizae. Many of these fungi produce various mushrooms on the forest floor that are traded at a high price. In this paper, we discuss the benefits, nutrient cycles, and artificial cultivation of mycorrhizae in Korea.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.169-173
• /
• 1999

The present study was undertaken to survey the infection status of Metagonimus sp. metacercariae in freshwater fishes from Tong river located in Kangwon Province, a total of 178 freshwater fishes of 11 species were collected by a fish net and traps from the end of September to early October 1998. They were brought to the laboratory and examined under a stereomicroscope after artificial digestion with pepsin-HCI solution for one hour. Ten out of eleven species of freshwater fishes examined were found to contain metacercariae of Metagonimus sp. The most frequently infected fish was Liobagrus andersoni Regan 91.7% (11 of 12 fishes), followed by Gobiobotia breviburba Mori 75.0% (6 of 8 fishes), Zacco temmincki 66.2% (49 of 74 fishes), Cobitis koreensis Kim 50.0% (1 of 2 fishes), Microphysogobio longidorsails Mori 42.9% (9 of 21 fishes), Cobitis rotundicudata Wakiya et Mori 33.3% (2 of 6 fishes), Hemibarbus longirostris 33.3% (1 of 3 fishes), Pungtungia tenuicorpus 30.0% (3 of 10 fishes), Coreoleuciscus splenddus Mori 28.6% (4 of 14 fishes), Coreoperca herri Herzeanstein 11.1％ (1 of 9 fishes) respectively Metagonimus metacercariae was not found from Moroco kumgangensis Uchida of freshwater fish. The total number of Metagonimus sp. metacercariae was 81, 17, 216, 1, 14, 2, 1, 4, 10, 1, respectively. Infection rates of Metagonimus sp. in the five districts was shown as follows : Chongson-up Kyulam-ri 50.0% (12 of 24 fishes), Chongson-up Kasu-ri 34.0% (17 of 50 fishes), Shindong-up Unchi-ri 56.0% (14 of 25 fishes), Shingdong-up Kosong-ri 57.1％ (20 of 35 fishes), Shingdong-up Duckchon-ri 54.5% (24 of 44 fishes) respectively. Infection rate of freshwater fish was 48.9% (87 of 178 fishes) and from the results obtained in this survey, it was confirmed that freshwater fishes from Tong river was infected with metacercariae of Metagonimus sp.