• Title/Summary/Keyword: artificial solution

Search Result 901, Processing Time 0.031 seconds

A Development of 3-D Numeric Model for the Confined Flow and Discharge under Sea Ground (해저 지중 피압유체의 흐름과 양수량 산출에 관한 3차원 수치모형의 개발)

  • Kim, Sang-Jun
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.22 no.6
    • /
    • pp.387-396
    • /
    • 2010
  • A 3-D numeric model for the confined transient flow under sea ground have been developed. This is FDM model using Gauss-Seidel SOR (successive over-relaxation). This model shows the similar head distribution pattern to Theis analytic solution and MODFLOW simulation. The input flowrate to the aquifer and discharge of well have been compared. And it have been found that mass balance is influenced by the weight factor ${\alpha}$, i.e. fullyimplicit method (${\alpha}$=1) shows 5% error, but when ${\alpha}$ becomes to 0.5(Crank and Nicolson method) the mass balance becomes worse and the model result diverges. And the convergency of the model is not much different when $\lambda$ (over-relaxation factor)=0.8~1.5, but when $\lambda$>1.5, the model result diverges. The test-run shows that the well discharge becomes smaller when another well is near. This model can cover the isotropy$(Kx{\neq}Ky{\neq}Kz)$ and inhomogeneity, and can be used for the selection of well site, discharge calculation, and head prediction in case of the artificial recharge etc.

Identification and inhibiting effect of Lactobacillus salivarius the formation of plaque and the production of volatile sulfur compounds by anaerobic bacteria (치태형성과 혐기성 세균의 황화합물 생성에 대한 Lactobacillus salivarius의 억제효과 및 동정)

  • Kim, Mi-Hyung;Sun, Gem-Ju;Ahn, Yeon-Jun
    • Journal of Korean society of Dental Hygiene
    • /
    • v.5 no.2
    • /
    • pp.131-145
    • /
    • 2005
  • There are normal inhabitants doing medically useful functions in the body. There are many kinds of bacteria performing specific functions in the oral cavity. Two strains of lactic add bacteria were isolated from normal inhabitants of children's oral cavity, which inhibited the production of volatile sulfur compounds by anaerobic bacteria. The authors identified the isolates by 16S rDNA partial sequencing. 1. Two isolates were Gram-positive bacilli and produced hydrogen peroxide. 2. When Streptococcus mutans was cultured in the media, the mean weight of formed artificial plaque on the orthodontic wires was $124.4{\pm}30.4$ mg, whereas being reduced to $5.2{\pm}2.0$ mg and $10.6{\pm}6.6$ mg in the media cultured with Streptococcus mutans and each isolate, respectively(p<0.05). 3. The number of viable cells of Streptococcus mutans was $3.4{\times}10^9$ per ml in the cultured solution, whereas those of Streptococcus mutans in the combined culture with each of isolates were $4.6{\times}10^8$ and $2.4{\times}10^8$ per ml. 4. The optical density was 1.286 in the supernatant of Fusoacterium nucleatum after vortexing for 30 minutes, whereas in the supernatant of combined Fusoacterium nucleatum and each isolate, they were reduced to 0.628 and 00497, which the percentages of coaggregation between them were 2904% and 57.8%, respectively. 5. The optical density of Fusoacterium nucleatum precipitate was 1.794 in the culture media containing cysteine and $FeSO_4$ being reduced to 1.144 and 0.915 in the coaggregated precipitates of Fusoacterium nucleatum and each isolate. 6. The similarity values of 16S rDNA sequence between each of isolates and Lactobacillus salivarius subsp. salicinius were 99.60% and 99.73%, respectively, meaning that isolates were Lactobacillus salivarius subsp. salicinius. These results indicated that two strains isolated from children's saliva, which inhibited the formation of plaque and the production of volatile sulfur compounds, were identified as Lactobacillus salivarius subsp. salicinius.

  • PDF

Reconstruction of the Bone Exposed Soft Tissue Defects in Lower Extremities using Artificial dermis(AlloDerm®) (인공 진피(알로덤®)을 이용한 하지의 골이 노출된 연부 조직 결손의 재건)

  • Jeon, Man Kyung;Jang, Young Chul;Koh, Jang Hyu;Seo, Dong Kook;Lee, Jong Wook;Choi, Jai Koo
    • Archives of Plastic Surgery
    • /
    • v.36 no.5
    • /
    • pp.578-582
    • /
    • 2009
  • Purpose: In extensive deep burn of the lower limb, due to less amount of soft tissue, bone is easily exposed. When it happens, natural healing or reconstruction with skin graft only is not easy. Local flap is difficult to success, because adjacent skins are burnt or skin grafted tissues. Muscle flap or free flap are also limited and has high failure rate due to deep tissue damage. The authors acquired good outcome by performing one - stage operation on bone exposed soft tissue defect with AlloDerm$^{(R)}$(LifeCell, USA), an acellular dermal matrix producted from cadaveric skin. Methods: We studied 14 bone exposed soft tissue defect patients from March 2002 to March 2009. Average age, sex, cause of burn, location of wound, duration of admission period, and postoperative complications were studied. We removed bony cortex with burring, until conforming pinpoint bone bleeding. Then rehydrated AlloDerm$^{(R)}$(25 / 1000 inches, meshed type) was applicated on wound, and thin split thickness(6 ~ 8 / 1000 inches) skin graft was done at the immediately same operative time. Results: Average age of patients was 53.6 years(25 years ~ 80 years, SD = 16.8), and 13 patients were male(male : female = 13 : 1). Flame burn was the largest number. (Flame burn 6, electric burn 3, contact burn 4, and scalding burn 1). Tibia(8) was the most affected site. (tibia 8, toe 4, malleolus 1, and metatarsal bone 1). Thin STSC with AlloDerm$^{(R)}$ took without additional surgery in 12 of 14 patients. Partial graft loss was shown on four cases. Two cases were small in size under $1{\times}1cm$, easily healed with simple dressing, and other two cases needed additional surgery. But in case of additional surgery, granulation tissue has easily formed, and simple patch graft on AlloDerm$^{(R)}$ was enough. Average duration of admission period of patients without additional surgery was 15 days(13 ~ 19 days). Conclusion: AlloDerm$^{(R)}$ and thin split thickness skin graft give us an advantage in short surgery time and less limitations in donor site than flap surgery. Postoperative scar is less than in conventional skin graft because of more firm restoration of dermal structure with AlloDerm$^{(R)}$. We propose that AlloDerm$^{(R)}$ and thin split thickness skin graft could be a solution to bone exposured soft tissue defects in extensive deep burned patients on lower extremities, especially when adjacent tissue cannot be used for flap due to extensive burn.

A Study on Improvement of Wettability and Comfort in Contact lens with Hyaluronic acid (Hyaluronic acid 함유 콘택트렌즈의 습윤성과 착용감 향상 효과 연구)

  • Kim, Hyun Jung;Kim, Soo-Hyun;Kim, Jai-Min
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.16 no.3
    • /
    • pp.255-264
    • /
    • 2011
  • Purpose: To study the effect of hyaluronic acid(HA), which was widely used in artificial tears, multi-purpose solution(MPS), cosmetics, and drug acting on the musculo-skeletal system, in wettability and comfort of contact lens, we compared HA including lens(+HA) with HA excluding lens(-HA) by clinical evaluation. Methods: During four weeks, the selected 28 university student volunteers who did not have any eye disease wore +HA contact lens on their right eyes, and -HA contact lens on their left eyes, and then compared right eyes to left eyes as control. After prescribing by spherical equivalent calculation, over-refraction by auto-refractometer, and contact lens wearing for two weeks and four weeks, tear evaluation, the anterior of eyes examination, fitting convenience evaluation, surface wetting test, surveys were checked up. Results: Compared with the control group (-HA contact lens), +HA contact lens provided better wetting properties. The amount of released tear in -HA contact lens group became less in four weeks than before, but that in +HA contact lens group showed no significant difference from the initial one. In terms of the redness in eye, there was no significant difference between +HA and -HA contact lens groups. Fitting of +HA contact lens on eye was much easier than the control, -HA contact lens. From the results of survey, comfort, wettability, ease of cleaning, and dryness of eye in +HA contact lens group were generally better than those of -HA group, but redness and contact lens handling showed little difference. Conclusions: The addition of HA in soft contact lens(+HA) may enhance the wettability of lens during lens wearing, resulted in the better comfortable wearing of lens eventually.

Micropropagation of Cassava by Suspension Culture Derived from its Nodal Explants (마디 절편의 현탁배양에 의한 카사바의 미세증식)

  • Yoon, Sil;Cho, Duck-Yee;Soh, Woong Young
    • Korean Journal of Plant Tissue Culture
    • /
    • v.27 no.3
    • /
    • pp.185-189
    • /
    • 2000
  • For the micropropagation, node explants of cassava were cultured in liquid MS medium with various concentrations of cytokinins on a rotary shaker (100 rpm) for 2 weeks. The adventitious roots and shoots from the explants were differentiated more efficiently in liquid medium than in solid. But root formation was not inhibited in medium with BAP and kinetin at low concentration (>0.05 mg 1/sup -1/), while in medium added with BAP and zeatin at high level (<0.25 mg 1/sup -1/), it was inhibited by callus forming on cut end of the cuttings. However, all of plantlets grown in liquid medium for more than 2 weeks showed symptoms of hyperhydricity. The plantlets grown in liquid medium were transferred into culture bottles filled with fine sand or artificial soil (pitmoss:perlite:vermiculite, 1:1:1 v/v) wetted with half strength of Knop's solution. After transplanted to culture bottles, some of vitriscent leaves were defoliated and new leaves were normally formed from shoot apex. Most of plantlets (>95%) were hardened-off successfully only in culture bottles with fine sand, and grew into 3-5 cm seedlings possessing 4-6 nodes after 4 weeks. Thus, the mass propagation of cassava on medium containing cytokinin could be established based on the suspension culture using node explants.

  • PDF

Development of Remote Reld Testing Technique for Moisture Separator & Reheater Tubes in Nuclear Power Plants (원자력발전소 습분분리재열기 튜브 원격장검사 기술 개발)

  • Nam, Min-Woo;Lee, Hee-Jong;Kim, Cheol-Gi
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.28 no.4
    • /
    • pp.339-345
    • /
    • 2008
  • The heat exchanger tube in nuclear power plants is mainly fabricated from nonferromagnetic material such as a copper, titanium, and inconel alloy, but the moisture separator & reheater tube in the turbine system is fabricated from ferromagnetic material such as a carbon steel or ferrite stainless steel which has a good mechanical properties in harsh environments of high pressure and temperature. Especially, the moisture separator & reheater tubes, which use steam as a heat transfer media, typically employ a tubing with integral fins to furnish higher heat transfer rates. The ferromagnetic tube typically shows superior properties in high pressure and temperature environments than a nonferromagnetic material, but can make a trouble during the normal operation of power plants because the ferrous tube has service-induced damage forms including a steam cutting, erosion, mechanical wear, stress corrosion cracking, etc. Therefore, nondestructive examination is periodically performed to evaluate the tube integrity. Now, the remote field testing(RFT) technique is one of the solution for examination of ferromagnetic tube because the conventional eddy current technique typically can not be applied to ferromagnetic tube such as a ferrite stainless steel due to the high electrical permeability of ferrous tube. In this study, we have designed RFT probes, calibration standards, artificial flaw specimen, and probe pusher-puller necessary for field application, and have successfully carry out RFT examination of the moisture separator & reheater tube of nuclear power plants.

Use of Pellet or Cube-type Phenolic Foam as an Artificial Medium for Production of Tomato Plug Seedlings (토마토 플러그 묘 생산을 위한 펠릿 및 큐브형 phenolic foam 인공배지의 이용)

  • Kim, Hye Min;No, Kyoung Ok;Hwang, Seung Jae
    • Horticultural Science & Technology
    • /
    • v.34 no.3
    • /
    • pp.414-423
    • /
    • 2016
  • Growers in plug seedling production think that root media in which rockwool is a component has given rise to several environmental problems. Therefore, the demand for new materials as a substitute for rockwool has been increased. This study examined the possibility of cultivation of tomato plug seedlings using a newly developed growing medium with phenolic foam. Plug seeds of tomato cultivar 'Madison' were sown in four pellet-type growing media: Grodan rockwool (GRW), UR rockwool (URW), phenolic foam LC (LC) or phenolic foam LC-lite (LC-lite). Then, the seedlings were transplanted to the four cube-type growing media 19 days after sowing. Seeds were germinated in a growth chamber ($25{\pm}2^{\circ}C$, 80% relative humidity, and dark) for 4 days and then the seedlings were grown with a nutrient solution supplied by an overhead irrigation system in a greenhouse. Plant height, number of leaves, leaf area, and fresh or dry weight of tomato seedlings were the greatest for the seedlings transplanted to URW cube media after being grown on LC-lite pellets. Root grade was the greatest for the seedlings transplanted on LC or LC-lite cube media after being grown on LC pellets. Chemical properties of all media tested for tomato growth were maintained within a stable range, while physical properties of URW showed high values in container capacity, air space, and total porosity. These results demonstrated that the phenolic foam media were effective for seedling growth and can substitute for rockwool as a root medium.

Characteristics of Eco-friendly Porous Concrete for Seawater Purification Using By-Products of Steel Industry (철강산업 부산물을 활용한 해수정화용 친환경 다공질콘크리트의 특성)

  • Han, Woonwoo;Lee, Byungjae
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.1
    • /
    • pp.1-7
    • /
    • 2020
  • As of 2018, Steel slag was generated approximately 24.23 million tons. Howeve, except blast furnace slag, steel slag is a typical by-product which does not have a clearly defined purpose in recycling. Thus, countries around the world are putting great efforts into developing a purpose for the recycling of steel slag. The vast habitat foundation of marine life has been destroyed due to recent reckless marine development and environment pollution, resulting in intensification of the decline of marine resources, and a solution to this issue is imperative. In order to propose a method to recycle large amounts of by-product slag into a material that can serve as an alternative to natural aggregate, the engineering properties and applicability for each mixing factor of environment friendly porous concrete as a material for the composition of seawater purification were in this study. Regarding the nutrient elution properties, it was clear that the nutrients continuously flowed out up to an immersion time by 8 months in natural seawater; the nitrogenous fertilizer displayed excellent elution properties in this regard.

Habitual Fallacy or Intentional Propaganda: Understanding the Mechanism of Re-constructing North Korean Myth (관습적 오류 혹은 의도적 프로파간다: 북한관련 '의혹'의 실체적 진실과 담론 왜곡의 구조)

  • Kim, Sunghae;Lu, Liu;Kim, Tongkyu
    • Korean Journal of Legislative Studies
    • /
    • v.23 no.1
    • /
    • pp.187-226
    • /
    • 2017
  • North Korea discourse is doubtful. A considerable portion is distorted under political objectives, group identity, and interests. Surely, there are facts based on North Korea's conducts. Apparent deceptions commonly exist as well though. Korean media does not endeavor to set the records straight and there are no revision towards mislead information. This is substantially dangerous as it can misjudge North Korean policies, beget national antipathy, and interferes with rational and constructive policy making. This study stems from such concerns and takes such cases as HEU(Highly Enriched Uranium) suspicion of 2002, dispute covering BDA(Banco Delta Asia)'s counterfeiting, and the abandonment of the Geneva Agreed Framework into consideration. The first part concentrates on fathoming the truth of the three cases. References from US government, academia, think tanks, media were inquired with an addition of secondary material from Korea and China. Secondly it examines whether domestic news properly reflects the precedent facts along the process of discovery. The cause and solution suggested by domestic media were organized and inductively reconstituted to frames. The last study questions the structural factors that reproduces suspicion analogs. Today's dangers facing Korean society are essentially not natural but artificial. This research hopes to foster peace by analyzing related discourses that are infamous to reinterpret reality.

A Study on the Design of Solid Lipid Nanoparticles for enhanced Skin Penetration of Pantothenic Acid (Pantothenic acid의 피부 투과 개선을 위한 고형지질나노입자설계 연구)

  • Yeo, Sooho
    • Journal of the Korean Applied Science and Technology
    • /
    • v.38 no.4
    • /
    • pp.915-921
    • /
    • 2021
  • In this study, we designed pantothenic acid (PA) loaded solid lipid nanoparticles (SLNs) for enhanced skin penetration of PA that is used for moisturizing agent in cosmetics with hydrophilic property. SLNs were prepared using various lipids and surfactants. PA loaded SLNs were fabricated using double emulsion method. The fabricated PA loaded SLNs assessed particle size, polydispersity index, zeta potential, loading capacity. Skin penetration study was conducted using artificial skin tissue originated from human epidermis as one of the reconstructed human epidermis models. The mean particle size and zeta potential of SLNs ranged from 192.15 nm to 369.87 nm and -21.39 mV to -40.55 mV, respectively. The loading efficiency and loading amount of PA loaded SLNs were ranged from 44.36% to 57.16% and 12.60% to 16.36%, respectively. The results of penetration demonstrated that all SLNs improved PA skin penetration. In addition, the amount of PA from SLNs were approximately 3.8 - 8.8 times higher than that from PA solution. Therefore, the fabricated SLNs demonstrated the enhancment of skin penetration of PA. Particularly, the SLN, which used glyceryl behenate and Span 60, showed optimal skin penetration of PA.