• Publications of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.31-40
• /
• 2019

We study the internal structure under the artificial mountain of Heumkyeonggak-nu, a Korean water-powered clock in the early Joseon dynasty. All the puppets on the artificial mountain are driven by the rotational force generated by the water wheel at their designated time. We design a model that work with three parts of the artificial mountain. At the upper part of the artificial mountain to the east, west, north and south, there are four puppets called the Four Mystical Animal Divinity and four ladies called the Jade Lady respectively. The former rotates a quarter every double hour and the latter rings the bell every hour. In the middle part of this mountain is the timekeeping platform with four puppets; the Timekeeping Official (Hour Jack), the Bell-, Drum-, and Gong-Warriors. The Hour Jack controls time with three warriors each hitting his own bell, drum, and gong, respectively. In the plain there are 12 Jade Lady puppets (the lower ladies) combined with 12 Oriental Animal Deity puppets. In his own time a lady doll pops out of the hole and her animal doll gets up. Two hours later, the animal deity lies down and his lady hides in the artificial plain. These puppets are regularly moved by the signal such as iron balls, bumps, levers, and so on. We can use balls and bumps to explain the concept of the Jujeon system. Iron balls were used to manipulate puppets of the timekeeping mechanism in Borugak-nu, another Korean water-powered clock in Joseon dynasty, which was developed earlier than Heumgyeonggak-nu. According to the North Korea's previous study (Choi, 1974), it is obvious that bumps were used in the internal structure of Heumgyeonggak-nu. In 1669, The armillary clock made by Song, I-young was also utilized bumps. Finally we presented mock-ups of three timekeeping systems.

• The Korean Journal of Ecology
• /
• v.25 no.5
• /
• pp.283-295
• /
• 2002

The number of species and individvals of birds observed in Bibong, Chinju-castle, Nosan and Saho parks were 49 and 4,349, 46 and 6,453, 37 and 2,817, and 33 and 6,014, nespectively The dominant species in all survey areas were shown in the order of Passer montanus(21.8%), Aegithalos spp.(20.7%), Pica pica(8.7%), Hypsipetes amaurotis(7.6%), Parus major(6.4%), Carduelis spp.(4.6%). Migration of birds was the order of residents, summer visitor, winter visitor, and passage migrant. The number of bird species appeared was the fewest in winter as 40 species and the most in spring as 53 species. Species diversity was the highest in Bibong park as 1.3256 and followed in the order of Sanho park, Nosan park, and Chinju-castle park. The nesting guild was higher at outside and artificial nesting guild(7-15 species) compared with hole, canopy, bush nesting guild(1-7 species) in all survey areas. The breeding forage guild was higher at canopy and bush(12-25 species) than that at outside, artificial, and air forage guild(2-8 species).

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.183-192
• /
• 1995

This study was conducted to investigate bird community and to suggest a proper way how to manage and protect wildbirds in Chuwangsan National Park. The survey was carried out over two survey sections by the line transect method in spring, summer and autumn in 1994. Total number of observed birds were 42 species(33 species in spring, 32 species in summer, and 26 species in autumn), and the result was the same with the typical pattern of temperate bird communities. Total number of natural monument and rare birds were 7 species, which included Golden Eagle(Aquila chrysaetos), Chinese Sparrow Hawk(Accipter soloensis), Eagle Owl(Bubo bubo), etc. In breeding season, species richness was high in canopy nesting guild, and density(ea/ha) was high in hole nesting guild. Canopy foraging guild was dominated in spring and summer, ratio of bush(or ground) foraging guild was increased in autumn. Since the habitats of observed natural monuments and rare species were roughly overlapped with the nature preservation area, it is necessary to preserve the area completely and to investigate and protect these species continuously. For the protection of the bush(or ground) foraging guild, it needs to plant bushes around trails and to control users. Food plants, artificial food planting of bushs, and artificial nest are needed for the habituation of wildbirds, and as the damage of wild cats is increasing lately, it needs to control these cats.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.489-496
• /
• 2004

Insertion of cannulae into vessels may disturb the blood flow doing non-physiological load and stress on blood cells such that ADP may increase and result in hemolysis. Authors used the computational method to simulate the 3-dimensional blood flow inside of the cannula using numerical method. We limited the research to within the drainage cannulae with side holes inserted through the human vein. In this paper, 9 different cannulae with side holes categorized by the number of side holes of 4, 12, and 20, and also categorized by the array type of side holes of staggered array, in-line array, and alternative in-line array were studied and compared to the cannula with no side holes by using CFD analysis. We evaluated the flow rate, the wall shear stress, and the shear rate and compared them with one another to estimate the effect of the side holes. The flow rate is not proportional to the number of the side holes. However, larger number of side holes can reduce the mean shear rate. Both the number and the array type of side holes play an important role on the fluid dynamics of the blood flow in cannulae.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.953-962
• /
• 1987

Domestic dissimilar structural steels, SM 45 C and SUS304 were friction welded under optimal welding condition and the micro-artificial holes were drilled at SM 45 C base metal, SM 45 C HAZ, welded zone, SUS 304 HAZ, and SUS 304 base metal for fatigue behavior tests. In this study, the fatigue limit and the behavior of micro-crack propagation, crack propagation rate, and its dependency on stress intensity factor under the low stress level and high stress level of bending stress have been investigated. The results obtained are as follows. (1) The fatgiue strength of the portion of SM45C B.M., SM45C HAZ, welded zune, SUS304 HAZ and SUS304 B.M. on notched friction welded specimens are 20 kgf/mm$^{2}$, 32 kgf/mm$^{2}$, 27kgf/mm$^{2}$, 29kgf/mm$^{2}$, and 29kgf/mm$^{2}$, respectively. (2) The fatigue strength of welded zone of unnotched and notched specimens are 32.5kgf/mm$^{2}$, and 27kgf/mm$^{2}$, respectively. (3) Micro-crack initiation in the welded zone, HAZ, and each base metals occurrs simultaneously in front and rear of micro-hole tips in the view of the rotational directions. (4) Fatigue crack propagates more slowly in the welded zone than in another protions of specimen, regardless of the magnitude of the stress level. (5) Fatigue crack propagation rates were plotted as a function of stress intensity range. The value of m in the equation da/dN=C(.DELTA.K)$^{m}$ was found to range from 2.09-2.55 in this study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.127-133
• /
• 2011

A LabVIEW program has been developed together with simple infrared thermography(IRT) system to control the lock-in conditions of the system efficiently. The IR imaging software was designed to operate both of infrared camera and halogen lamp by synchronizing them with periodic sine signal based on thyristor(SCR) circuits. LabVIEW software was programmed to provide users with screen-menu functions by which it can change the period and energy of heat source, operate the camera to acquire image, and monitor the state of the system on the computer screen. In experiment, lock-in IR image for a specimen with artificial hole defects was obtained by the developed IRT system and compared with optical image.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.9
• /
• pp.401-408
• /
• 2014

This paper proposes an optimum operation method for open type ground heat exchangers. A series of TRTs and artificial heating/cooling operations were carried out while monitoring temperature in the hole of SCW. The ground temperature naturally increases with depth, but a switch between the cooling/heating mode results in a change in the distribution of ground temperature. The effect of the mode change was evaluated by performing LMTD and COMSOL multiphysics analysis for a reduced model with the depth of 150 m. As a result, in the cooling mode, the upstream operation is more efficient than the downstream operation and reduces EWT by $2.26^{\circ}C$. On the other hand, in the heating mode, the downstream operation is advantageous over the upstream operation and increases EWT by $3.19^{\circ}C$. The merit of the optimum operation will be enhanced for the typical dimension of SCW with a depth of 400~500 m. In the future, an open type ground heat exchanger system adopting the optimum operation with variation in the ground temperature will be used in practice.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.474-482
• /
• 2002

One dimensional Radiometric scanning system was fabricated and tested as a filmless radiographic inspection system, which could be applied to the evaluation of the corrosion and deposits in the pipeline. This system is composed of the single radioactive source of the collimated focusing beam, and single scintillation detector of BGO, and the mechanical scanning system to transport and align the source and detector, and the operating software to automatically control the mechanical scan system. The performance of the system was simulated using GEANT4 software. This system is applied to one specimen having an artificial falw(flat bottom hole) in the pipe and the other specimen with thickness variation. For the inspection by using the radioactive source in the pipeline, it is possible to evaluate the corrosion and deposits in real time and without film.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.406-414
• /
• 2001

Ultrasonic guided waves were explored to apply them to the long range inspection of polyethylene coated steel gas pipes. The steel pipes have such dimensions as 190.7mm inside diameter and 5.3mm thickness. The outside surface of the pipe is coated by a polyethylene layer of $1.9{\pm}0.5mm$ thickness. Non-axisymmetric guided waves were excited on the outside surface of the polyethylene coated pipe by using a 0.5MHz transducer with a variable angle shoe. Frequency and phase velocity tuning was used to find optimum guided wave modes for the inspection. The dispersive characteristics of the modes were analyzed in time-frequency representation obtained by short time Fourier transforms. Sample results were presented for artificial defects such as wall thinning and hole.

• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.75-86
• /
• 2004

This study aims at considering and analyzing the stature of denim clothing as an ornament as well ai how aesthetic meaning and human being's mental side indwell in the development of denims. which will be proceeded in the future, from the view of contemporary culture of dressing. It is found that the stylishness expressed through denim clothing is formed on the basis of the cultures of party, drawing and disorganization, and the result of the study was as follows. Firstly, the culture of party became the source of for decoration of denim clothing, and denim clothing more glamorize women as a party-look which makes the most use of its advantage to be comfortable and able to display in various ways with splendid artificial jewelry, patchwork, dyed pattern which is elaborately embroidered. Secondly, Such culture of drawing is applied to denim clothing so that denims are expressed to make people feel more human being's warmth as being free from the existing stereotype and formality. Thirdly, the most outstanding feature of denim clothing showed in the culture of disorganization is to make the most use of vintage style as it is. This reflects an image of the culture of disorganization under postmodernism, which is free from the traditional conception of the existing dressing by destroying the original form, in the way of slashing, making a hole and tearing. That is, people can sufficiently express not only free sense of release based on postmodernism by wearing denim clothing, but also human being's intrinsic desire for restoration of humanism or human warmth with splendid decoration or various techniques such as handicraft. It can be recognized these features as the reasons, that make denim clothing place themselves as an original fashion item, by giving denim clothing technical decoration in recent years.