• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1262-1272
• /
• 1996

순수 함수언어는 참조적 투명성을 가지고 있으므로 모든 객체에 대한 직접적 인 갱신이 불가능하다. 배열과 같은 집단자료구조가 갱신되면, 참조적 투명성을 유지하기 위하여 원래의 배열과 갱신된 배열이 모두 유지되어야 한다. 따라서 모든 자료에 대한 참조적 투명성을 유지하면서 자료의 유지 비용을 줄일 수 있는 효과적 인 방법의 개발이 요구되고 있다. 본 논문에서는 이러한 문제를 해결하기 위한 함수형 배열을 제시하고, 검증하고자 하였다. 이와 같은 검증을 위해서, 제안된 방법을 컴비네이터 그래프 감축기 상에서 구현하였다. 제안된 방법에서 배열 연산에 대한 탐색시간을 줄 일 수 있었으며, 갱신 비용과 최근 버전에 대한 접근은 갱신된 자료를 실행시간에 재 구성하는 과정 없이 상수시간에 가능하였다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• 한국통신학회논문지
• /
• 제38A권8호
• /
• pp.650-655
• /
• 2013

광저장장치의 DC-억압을 위한 멀티모드 코딩 기법 중 Guided Scrambling (GS) 코딩기법이 널리 사용된다. 홀로그래픽 저장장치를 위한 DC-억압 GS코딩에서는 후보코드 선택기준으로 심볼의 균등한 분포 및 심볼간 천이의 최대화 기준이 고려되었다. 본 연구에서는 후보코드행렬의 digital sum value (DSV)의 $l_{\infty}$-norm을 최소화하는 minimum DSV (MDSV) 기준 GS코딩을 정수계획법 모형으로 수식화하고, 제안된 모형을 사용하여 MDSV 기준과 최대천이강도 기준이 적용된 GS코딩의 성능을 제어비트수, 행렬크기 및 스크램블링 다항식들의 조합에 대하여 평가한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.262-267
• /
• 1998

In Synthetic Aperture Radar(SAR) imaging, the echoed data are collected by moving radar's position with respect to the target area, and this operation actually gives effect of synthesizing aperture size, which in turn gives better cross range resolution of reconstructed target scene. Among several inversion scheme for SAR Imaging, we uses an inversion scheme which uses no approximation in wave propagation analysis, and try to verify whether the collected data with synthesized aperture actually gives the same support as that with physical aperture in the same size. To do this, we make a signal subspace comparison of two imaging models with physical and synthesized arrays, respectively. Theoretical comparison and numerical analysis using Gram-Schmidt procedures had been performed. The results showed that the synthesized array data fully span the physical array data with the same system geometry and strongly support the proposed inversion scheme valuable in high resolution radar imaging.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1263-1272
• /
• 2016

다구찌가 제안한 파라미터설계에서 사용되는 교차배열은 제어인자뿐만 아니라 잡음인자를 동시에 고려한 획기적인 방법으로 많은 장점이 있다. 반면 단점으로는 지나치게 많은 실험수를 필요로 하는 점이다. 실험수를 줄이기 위한 방안으로 통합배열 방법론이 제시되었다. 또 다른 단점으로 다구찌는 최적조건을 찾는데 있어서 신호대 잡음비를 사용하였는데 신호대 잡음비를 사용함에 따라 여러 가지 문제가 발생하였다. 본 논문에서는 파라미터설계에서의 단점을 개선하고자 신호대 잡음비에 의존하지 않으면서도 실험수를 줄이기 위한 대체방안을 제안하고자 한다. 아울러 파라미터설계에서 사용되는 교차배열과 실험수를 줄인 통합배열 두 가지 사례를 들어 비교 연구하고자 한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.52-57
• /
• 1999

Korea Earthquake Monitoring System(KEMS) in the Korea Institute of Geology Mining and Materials(KIGAM) as detected more than 1000 events since the end of 1998. But not all events are interpreted as earthquakes because many events are concentrated on daytime. It strongly implies that in addition to earthquake these events include artificial effects such as industrial blasting. Before the determination of eathquake charactertistics in the korean peninsula it is necessary to discriminate the detected events as earthquakes or artificial events. For the discriminant study KIGAM and SMU(Southern Methodist University) installed a triangular four-element 1-km aperture seismo-acoustic array at Chul-Won area northeast of Seoul Korea. Each array element includes a GS-13 seismometer in the bottom of borehole and a Validyne DP250-14 microbarometer sensor mounted inside of the borehole 1,2 meter deep connected to a 11 arm radial array of 10m porous soaker hoses. This array introduce the use of 2.4-GHz radios for inter-array self-contained solar-charged power system and GPS time-keeping system. A 24-bit digital data acquisition system performs 40 SPS in the infrasound and seismometer data. Velocity and direction of wind and temperature are also measured at hub site and included to the data stresam. This seismo-acoustic array will be used to identify and locate associated with industrial blasting and these identified and located events will be applied to form a ground truth database useful to assist the other development of discriminant studies.

• 대한의용생체공학회:의공학회지
• /
• 제27권6호
• /
• pp.409-417
• /
• 2006

Research on neural circuit is a difficult area due to complexity and inaccessibility. Due to recent developments, the research using multi-electrode array of cells or tissues has become an important research area. However, there are some difficulties to decode the submerged meaning from huge and complex neural data. Moreover, it needs a harmonic collaboration between informatics and bioscience. In this paper, we have developed a custom-designed signal processing technique for multi-electrode array measured neural responses induced by electrical stimuli to the hippocampal tissue slices of the rat brain. The raw data from hippocampal slice using the multi-electrode array system were saved in a computer. Then we estimated characteristic points in each channel and calculated the total activity. To estimate the points, we used the Polynomial Fitting Approximation Method. Using the calculated total activity, we could provide the histogram or pseudo-image matrix to help interpretation of results.

• Journal of the Korean Data and Information Science Society
• /
• 제11권1호
• /
• pp.65-72
• /
• 2000

로버스트설계는 품질공학에서 품질특성치의 수행변동(performance variation)을 줄이는데 있다. 다구찌가 제안한 파라미터설계는 아주 많은 장점을 가지고 있으나 몇 가지 단점이 있다. 그 중에서 파라미터설계에 있어서 교차배열은 제어인자와 잡음인자의 모든 교호작용효과를 고려한 실험배치이기 때문에 많은 실험횟수를 필요로 하는 단점이 있다. 그래서 대안방법으로 Welch등(1990)이 제안한 통합배열이 고려된다. 본 논문에서는 로버스트 설계를 위한 다구찌의 파라미터설계(혹은 교차배열방법론)와 통합배열방법론을 시뮬레이션을 통하여 비교 연구하고자 한다.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• 디지털산업정보학회논문지
• /
• 제18권2호
• /
• pp.17-26
• /
• 2022

In this paper, we propose a novel method of performing convolutional operations on a 2-D Processing Element(PE) array. The conventional method [1] of mapping the convolutional operation using the 2-D PE array lacks flexibility and provides low utilization of PEs. However, by mapping a convolutional operation from a 2-D PE array to a 1-D PE array, the proposed method can increase the number and utilization of active PEs. Consequently, the throughput of the proposed Deep Convolutional Neural Network(DCNN) accelerator can be increased significantly. Furthermore, the power consumption for the transmission of weights between PEs can be saved. Based on the simulation results, the performance of the proposed method provides approximately 4.55%, 13.7%, and 2.27% throughput gains for each of the convolutional layers of AlexNet, VGG16, and ResNet50 using the DCNN accelerator with a (weights size) x (output data size) 2-D PE array compared to the conventional method. Additionally the proposed method provides approximately 63.21%, 52.46%, and 39.23% power savings.