• ETRI Journal
• /
• 제26권6호
• /
• pp.605-614
• /
• 2004

In this paper, we investigate array calibration algorithms to derive a further improved version for correcting antenna array errors and RF transceiver errors in CDMA smart antenna systems. The structure of a multi-channel RF transceiver with a digital calibration apparatus and its calibration techniques are presented, where we propose a new RF receiver calibration scheme to minimize interference of the calibration signal on the user signals. The calibration signal is injected into a multi-channel receiver through a calibration signal injector whose array response vector is controlled in order to have a low correlation with the antenna response vector of the receive signals. We suggest a model-based antenna array calibration to remove the antenna array errors including mutual coupling errors or to predict the element patterns from the array manifold measured at a small number of angles. Computer simulations and experiment results are shown to verify the calibration algorithms.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.74-79
• /
• 2016

This paper proposes an optimum array configuration to improve null steering time for mobile controlled reception pattern antenna (CRPA) systems. The proposed array consists of a single reference element at the center and nine auxiliary elements arranged in a circular array. The array radius and the vertical positions of the center element are optimized using a genetic algorithm in conjunction with a constrained least-mean-square algorithm. The results demonstrate that the proposed array is suitable for mobile CRPA systems without significant side nulls in satellite directions.

• 전기의세계
• /
• 제29권9호
• /
• pp.584-593
• /
• 1980

Conventional radar antenna systems are susceptible to performance degradation caused by unwanted signals received via the antenna sidelobes and/or mainlobes. Adaptive array systems offer possible solution to this interference problem by automatically steering nulls to unwanted signals providing significant system performance improvement. Another important andvantage of the adaptive array is its self-optimization capability which uses the collective incoming noise data for the nulling purposes. This paper provides a tutorial introduction to adaptive arrays as well as some new development of recent research in this area. Optimum link between the antenna theory and signal processing has been sought by illustrating the gain patterns and output signal-to-noise ratio. Signal acqusition methods are shown including a new attempt of the use of spread-spectrum techniques in conjuction with array systems.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.127-134
• /
• 2014

본 연구에서는 X-밴드 taper 슬롯구조 능동위상 배열 안테나를 구현하였으며, 구현한 안테나의 성능을 해석하고 측정을 통하여 분석하였다. 제작된 광대역 위상배열 안테나의 능동반사계수 및 능동복사패턴을 측정한 결과를 통하여 설계된 위상배열 안테나의 능동반사계수 및 능동복사패턴 결과와 일치함을 확인하였고, 안테나의 광대역 빔 특성을 검증하여 설계 목표에 부합하는 안테나 구조를 제안하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권2호
• /
• pp.182-186
• /
• 2004

This paper describes an advanced compensation for non-linear functions designed to remove steering aberrations from phased array antennas. This system alters the steering command applied to the antenna in a way that the appropriate angle commands are given to the array steering software for the antenna to point to the desired position instead of squinting. Artificial neural networks are used to develop the inverse function necessary to correct the aberration. Also a straightforward antenna steering function is implemented with neural networks for the 9-term polynomials of forward steering function. In all cases the aberration is removed resulting in small RMS angular errors across the operational angle space when the actual antenna position is compared with the desired position. The use of neural network model provides a method of producing a non-linear system that can correct antenna performance and demonstrates the feasibility of generating an inverse steering algorithm.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.154-159
• /
• 2018

In this paper, electromagnetic radiation from a slot array antenna enclosed by a Von Karman radome is analyzed by using the ray tracing method and Huygens's principle. We consider the rectangular slot array antenna and the Von Karman radome. The radiation patterns are calculated by using the surface currents of the radome to illustrate the electromagnetic behaviors of the radome-enclosed waveguide slot array antenna.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.211-214
• /
• 2004

Microstrip slot array antenna fed by microstrip line is introduced. Slot antenna is designed to operate at 10 GHz for using in radar systems. Antenna have dielectric constant of the substrate is 2.17 (PTFE). In fact, it is study to analyze slot array antenna including feeding line with wide bandwidth. The characteristics of antenna is proposed and analyzed for instance input impedance, $S_{11}$ parameter and far field radiation patterns which these characteristics can also be calculated efficiently and accurately by using FDTD Method.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.439-449
• /
• 1998

In this paper, error performance of DS-CDMA communication system has been analyzed in a radio channel which is characterized by multi-user interference (MUI). Also, performance improvement has been obtained by both numerical analysis and simulation techniques when 3-element array antenna and co-channel interference (CCI) canceller are employed as a means for overcoming an MUI effect. The MUI was modelled as a gaussian random process. In array antenna scheme we only considered a directivity of antennal. The results show that there is a substantial enhancement in performance by employing an array antenna or a CCI canceller. CCI canceller gives better improvement in performance than the array antenna with D=2.67. Additional improvement can be obtained when the array antenna and the CCI canceller are adopted in cascade form. In this case the error performance approaches that of AWGN environment.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.135-143
• /
• 2022

In this paper, the compact waveguide slot array antenna for interferometric radar altimeter is proposed. The proposed antenna structure consist of corrugation structure which is applied between each channel to improve isolation, three-channel waveguide slot array antenna and feeder. In addition, to reduce the occurrence of phase ambiguity, the baseline spacing of the three-channel antenna is analyzed and the results are applied to the design. For compact design, reduced height and SMP connector structure are used and the dip brazing method which is the conjugation method after dipping to flux is used for the fabrication of the lightweight antenna. The measurement result of the proposed antenna shows less than 1.41 : 1 (VSWR) and 48.3 dBc (isolation). The antenna gain is higher than 20.2 dBi and the side lobe levels are lower than 18.8 dB (vertical plane) and 10.0 dB (horizontal plane).

• 대한전자공학회논문지TC
• /
• 제41권2호
• /
• pp.41-51
• /
• 2004

본 논문에서는 IMT-2000 기지국용 빔 조향 다이폴 위상배열 안테나 시스템을 설계하였다. 본 논문에서 설계한 빔 조향 다이폴 위상배열 안테나 시스템은 크게 안테나부와 빔 조향 제어부로 구성된다. 안테나부는 광대역 특성을 위해 기본 복사소자로 평판형 다이폴을 제안하고, 설계하였으며, 지향성 복사패턴을 위해 평판형 다이폴을 8×8로 배열하였다. 또한 다이폴 수직배열 8소자 전력분포를 위한 수직 전력 분배기를 설계하였다. 빔 조향 제어부에서는 다이폴 수평배열 8소자 전력분포를 위한 수평 전력 분배기와, 수평방향(7방향)에 빔 틸트를 위한 4비트 위상 변위기와 구동회로를 설계하였다. 설계된 안테나 시스템의 성능을 평가하기 위해 실제 제작하고 복사특성을 측정하였다. 측정견과 각 제어신호에 따라 수평 빔 틸트가 일어남을 확인할 수 있었으며, 측정된 복사특성은 설계목표에 거의 근접한 것으로 나타났다.