• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.201-206
• /
• 1993

Four reinforced concrete beams without shear reinforcement were tested statically up to failure to investigate the arch action in reinforced concrete beams. Major variable was the shear span to depth ratio varied from 2 to 4. Due to the reduction of internal moment arm length by the development of arch action, the measured steel tension was higher than the calculated steel tension.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.982-996
• /
• 2010

This study classified the body shapes of Korean obese women and investigated the differences of each body shape, using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen through previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects and 54 body measurements and obesity judgment indices were used in this study. Firstly, mean, standard deviation, minimum, and maximum values of each measurement and item were obtained from the descriptive analysis of 53 measurements. According to the descriptive analysis, all measurements and obesity judgment indices of the subjects demonstrated a serious obesity level shown by BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, WHR 0.90, and waist circumference 86.71cm. In addition, the measurements and indices showed considerable differences between minimum and maximum values. Significant differences were identified in all measurements and items at a significant level, p=.001. Each distribution of body types according to age, stature, bust, and waist circumference groups was provided in this study. Secondly, factor analyses were conducted using 38 measurement items to extract the body characteristics of obese women. Factor 1 was "circumference measurements & obesity judgment indices," Factor 2 was "heights & arm-related lengths," and Factor 3 was "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences" and Factor 8 was "neck base circumference & front width in upper body." These 8 factors explained 76.54% of the total variance. Finally, 5 body types were selected in the cluster analysis. Type 1 (with big back widths & arm circumferences) was 15.5% of the entire subjects, Type 2 (the shortest and fattest, with big upper body) was 18.8%, Type 3 (with big breast) was 27.8%, Type 4 (the tallest and longest in arm lengths, with the smallest arm circumferences and lengths in torso) was 22.5%, and Type 5 (with big hips compared to waist circumferences, smaller height and upper body) was 15.5%. Fundamental differences were identified in all measurements and items at the significant level of p=.001. In addition, each distribution of body type according to age, height, bust, and waist circumference groups was provided in this study.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.253-256
• /
• 2012

We present the IRC images of M51, a pair of interacting galaxies. Given the high angular resolution (7.4") and the wide field of view (~ 10') covering almost the entire M51 system, we investigate dust properties and their connection to the spiral arm structure. We have applied image-filtering processes including the wavelet analysis to the N3 image, which traces the total stellar mass best among the IRC bands. From this filtered image, the center, arm, and interarm regions are defined. A color, or flux ratio among the MIR bands, has been measured at each pixel (3.7" in size). We find a wide variety of S7/S11 with a difference between arm and interarm regions. We also find that at some positions S11 seems to be higher than predicted by MW dust models. Estimated contributions from the stellar continuum and gas emission lines to the band are not enough to explain this discrepancy. From these results, we deduce that the PAH ionization condition and its fraction to the total dust mass in M51 are different from those in MW.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.3
• /
• pp.261-271
• /
• 2006

To study the correlation with increasing body fat mass for the Standard Guideline for Korean Dietary Life, a nationwide, cross-sectional survey was performed with 178 male college students in december 2005. Among the student subjects, 76 were analyzed for body protein mass, body mineral mass, body fat mass, percent body fat, waist-hip ratio(WHR), body mass index(BMI) and obesity degree using Inbody 3.0(Biospace Co, Seoul, Korea). Body protein mass was at a high level of 92.1%, body mineral mass was at a low level of 94.7%. Body fat mass was at a high level of 28.9%, percent body fat was at a high level of 37.3%, WHR was at a high level of 31.6%, and obesity degree was at a high level of 38.2%, BMI was at a high level of 24.3% and BMR was observed at a high level of 41.8%. WHR was correlated with '7. Prepare food proper amount sanitarily.' and obesity degree, while BMl was were correlated with '4. Increase movement and eat proper amount.' positively. BMR was correlated with '6. Enjoy 3 meal a day regularly.' ArmCircle was correlated with '4. Increase movement and eat proper amount.' and fitness score was corrected with '4. Increase movement and eat proper amount', and '8. Enjoy Korean rice food style.' positively. Body protein mass and body mineral mass were negatively correlated with fruit, ArmCircle was positively correlated with fish, obesity degree was positively correlated with soup and BMI and ArmCircle were positively correlated with sweet. '8. Enjoy Korean rice food style.' was negatively significantly correlated with overweight, over percentage body fat, obesity degree > 120 and BMI. Male students were not practicing the Standard Guideline for Korean Dietary Life well with an average score of 37.7%. However, male students who are within the normal range of body composition analysis value have to notice that over range of weight, protein, percentage body fat, WHI and obesity degree was observed above average score of 30%.

• Composites Research
• /
• v.28 no.5
• /
• pp.327-332
• /
• 2015

In this research, a parametric study was carried out to design a metal-carbon fiber reinforced plastics (CFRP) hybrid pantograph for weight reduction of high speed train (KTX). To design a light-weight and high-stiffness pantograph, some parts of the original steel upper arm was replaced by CFRPs with appropriate stacking sequences. For the parametric study, steel was replaced by aluminium considering structure stiffness and weight of hybrid upperarm of a pantograph. Finite element analysis (FEA) was performed for checking the structure stiffness with varying design parameters. Static vertical load stiffness and weight changing ratio were derived from real CX-PG pantograph model analyses. From the FEA results, the geometries of high-stiffness, light-weight pantograph have been suggested.

• Korean Journal of Ichthyology
• /
• v.30 no.2
• /
• pp.71-74
• /
• 2018

The karyotype analysis of an endangered freshwater fish, Microphysogobio koreensis, was performed to obtain basic data for phylogenetic information. To carry out our study, 4 specimens were collected in Seomjingang River and Nakdongang River and its kidney was treated by flame-drying method. The chromosome number of this species demonstrated 50 diploid chromosomes, with two populations of M. koreensis not significantly different. The karyotype revealed 2n=26m+24sm, consisting of 26 metacentric (m) and 24 submetacentric (sm) chromosomes with the total fundamental arm number determined as FN=100. Total arm length and arm ratio of the chromosomes were $1.44{\sim}2.68{\mu}m$ and 1.27~2.27, respectively. The karyotype of M. koreensis was first reported in this study.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.2
• /
• pp.120-123
• /
• 2012

Objective : Percutaneous vertebroplasty (PVP) is usually carried out under three-dimensional (2D) fluoroscopic guidance. However, operative complications or bone cement distribution might be difficult to assess on the basis of only 2D radiographic projection images. We evaluated the feasibility of performing an intraoperative and postoperative examination in patients undergoing PVP by using three-dimensional (3D) reconstructive C-arm. Methods : Standard PVP procedures were performed on 14 consecutive patients by using a Siremobil Iso-$C^{3D}$ and a multidetector computed tomography machine. Post-processing of acquired volumetric datasets included multiplanar reconstruction (MPR) and surface shaded display (SSD). We analyzed intraoperative and immediate postoperative evaluation of the needle trajectory and bone cement distribution. Results : The male : female ratio was 2 : 12; mean age of patients, 70 (range, 77-54) years; and mean T score, -3.4. The mean operation time was 52.14 min, but the time required to perform and post-process the rotational acquisitions was 7.76 min. The detection of bone cement distribution and leakage after PVP by using MPR and SSD was possible in all patients. However, detection of the safe trajectory for needle insertion was not possible. Conclusion : 3D rotational image acquisition can enable intra- or post-procedural assessment of vertebroplasty procedures for the detection of bone cement distribution and leakage. However, it is difficult to assess the safe trajectory for needle insertion.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.387-395
• /
• 2015

Starfish, a species of Echinoderm, is widely known as a predator on benthic invertebrate. A series of fishing experiments was carried out in the western coastal waters of Korea from September, 2011 to November, 2012, using the drum-shaped pots of different mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm) to describe the composition of the catch species and the mesh selectivity of the pot for starfish. Some species including fish, crab, and starfish were caught in the experimental pots. The SELECT (Share Each Length's Catch Total) method was applied to describe the selectivity of the pot for starfish Asterina pectinifera. The master selection curve was estimated to be s(R) = exp(10.358R-4.086) / [1+exp(10.358R-4.086)], where R is the ratio of arm length to mesh size. The relative arm length of 50% retention was 0.395, and the selection range was 0.212. The results should be helpful to understand the relationship between the catch size of starfish and the mesh size of pot.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.34.1-34.1
• /
• 2010

Studies suggest that activities in luminous AGNs, residing mostly in early-type galaxies, are triggered by merging. However, the observational evidence for the connection between mergers and AGN activity is not clear yet because tracer of the past merging activities such as tidal tail, shell are often too faint. To see if we can reveal the merging features with a small telescope, we observed an AGN, MARK 478, at z=0.077 with long exposure time (7550 seconds) in V filter at Maidanak observatory. Our 2-D fitting analysis shows that the host galaxy of MARK 478 has the bulge to the total luminosity ratio of 0.3. And the residual image, after subtracting point spread function (PSF), bulge and disk components, shows that the host galaxy has an arm-like feature that could be a spiral arm or a feature from minor merging. We also show that the structural parameters obtained from our 2-D fitting match well with those derived from HST image. The promising result suggests that studies of low redshift AGN host galaxies are possible with data from a small telescope. In order to allow a statistical analysis, we hope to expand our sample size in future.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.82-90
• /
• 2009

Pneumatic cylinder is one of the low cost actuation sources which have been applied in industrial and prosthetic application since it has a high power/weight ratio, a high-tension force and a long durability However, the control problems of pneumatic systems, oscillatory motion and compliance, have prevented their widespread use in advanced robotics. To overcome these shortcomings, a number of newer pneumatic actuators have been developed such as McKibben Muscle, Rubber Actuator and Pneumatic Artificial Muscle (PAM) Manipulators. In this paper, one solution for position control of a robot arm, which is driven by two pneumatic artificial muscles, is presented. However, some limitations still exist, such as a deterioration of the performance of transient response due to the changes in the external load of the robot arm. To overcome this problem, a switching algorithm of the control parameter using a learning vector quantization neural network (LVQNN) is proposed in this paper. This estimates the external load of the pneumatic artificial muscle manipulator. The effectiveness of the proposed control algorithm is demonstrated through experiments with different external working loads.