• Journal of Korean Society of Rural Planning
• /
• v.4 no.2
• /
• pp.128-137
• /
• 1998

The objective of this study is to approach on the spatial boundary of rural development protect by areal classification technique with spatial reference to searching of areal homogeneities in two hierachial administrative units, Ri Eup/Myun. In this study, a criterion for judging areal homogeneities is the degree of agriculture and urbanizing. Variables selected by these two criteria are analysed with the method of fator analysis. The results of areal analysis are as follows: first, generally, the importance of agricultural factors in areal analysis is getting less. Second, areal classification by Myun, Ri in Ansong City is revealed variously because of urban factors. Urban factors make areal heterogeneities become greater, Therefore urban factors are important when analyzing areal characteristics. Third, lately, in areas near by Chung- cheong Do and areas with bad road's condition, areal heterogeneities have been also getting greater. The results of analysis about areal characteristics of Myun and Ri are different from each other. In addition, urban factors are more influential on the areal characteristics than agricultural factors. Therefore, the establishment of rural development project for inindle spatial boundary between Myun unit and Ri unit is needed.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.736-751
• /
• 2008

Although a growing number of studies have commonly used a simple areal weighting interpolation method to quantify demographic characteristics of impacted areas in environmental equity analysis, the results obtained are inevitably imprecise because of the method's unrealistic assumption that population is evenly distributed within a census enumeration unit. Two alternative areal interpolation methods such as intelligent areal weighting and regression methods can account for the distributional biases in the estimation of impacted populations by making use of additional information about the geographic distribution of population. This research explores five areal interpolation methods for estimating the population characteristics of impacted areas in environmental equity analysis and evaluates the sensitivity of the outcomes of environmental equity analysis to areal interpolation methods. This study used GIS techniques to allow areal interpolation to be informed by the distribution of land cover types, as inferred from a satellite image. in both the source and target units. Independent samples t-test statistics were measured to verify the environmental equity hypothesis while coefficients of variation were calculated to compare the relative variability and consistency in the socioeconomic characteristics of populations at risk over different areal interpolation methods. Results show that the outcomes of environmental equity analysis in the study area are not sensitive to the areal interpolation methods used in estimating affected populations, but the population estimates within the impacted areas are largely variable as different areal interpolation methods are used. This implies that the use of different areal interpolation methods may to some degree alter the statistical results of environmental equity analysis.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.21-34
• /
• 2018

Discontinuities considerably affect the mechanical and hydraulic properties of rock mass. These properties of the rock mass are influenced by the geometry of the discontinuities to a great extent. This paper aims to render an account of the geometrical parameters of several discontinuity sets related to the surrounding rock mass of Rudbar Lorestan Pumped Storage Power Plant powerhouse cavern making use of the linear and areal (circular and rectangular) sampling methods. Taking into consideration quite a large quantity of scanline and the window samplings used in this research, it was realized that the areal sampling methods are more time consuming and cost-effective than the linear methods. Having corrected the biases of the geometrical properties of the discontinuities, density (areal and volumetric) as well as the linear, areal and volumetric intensity accompanied by the other properties related to four sets of discontinuities were computed. There is an acceptable difference among the mean trace lengths measured using two linear and areal methods for the two joint sets. A 3D discrete fracture network generation code (3DFAM) has been developed to model the fracture network based on the mapped data. The code has been validated on the basis of numerous geometrical characteristics computed by use of the linear, areal sampling methods and volumetric method. Results of the linear sampling method have significant variations. So, the areal and volumetric methods are more efficient than the linear method and they are more appropriate for validation of 3D DFN (Discrete Fracture Network) codes.

• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.425-435
• /
• 2004

Mainly, observed maximum rainfall has been evaluated by point rainfall, but actually it should be considered by means of average areal rainfall. Average areal rainfall is an estimated value computed through DAD(rainfall Depth-Area-Duration) analysis. By using this value, an average and maximum areal rainfall according to area-duration relationship could be computed. In this study, we assume that the whole Korea region is hydrologically homogeneous, and then analyze using the storm-centered DAD(moving-area DAD) method for the past century data. From this analysis, we evaluate the yearly variation of observed maximum areal rainfall through area-duration relationship. And we also construct an IDF(rainfall Intensity-Duration-Frequency) curve by using the annual time series data which is composed of maximum areal rainfall. The characteristics of IDF and observed maximum areal rainfall is also evaluated.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.2
• /
• pp.29-37
• /
• 2004

An areal elderly migration model (AEMM) was developed to assess the demand of rural development projects targeted towards elderly people. The AEMM was developed with adaptation of the gravity model to represent spatial interaction regarding amenities. Areal characteristics were classified for estimating the amenities from the perspective of net migration. From 1990 to 2000, data were acquired from USCB, PASDA, PAHEALTH, PADCNR, PFBC, and NCDC in 67 Pennsylvania counties for analysis and application. The results revealed that elderly migration can be explained not only by areal characteristics but also by spatial interaction considering the population, distances, and amenities of surrounding areas.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.115-125
• /
• 2019

The purpose of this study is to analyze the occurrence characteristics of vacant spaces in the old hillside residential area, focused on 7 areas surrounding old downtown in Busan. This study suggests 3 stages of analysis as following. First, after the overall site survey on the vacant spaces in 7 old hillside residential areas in Busan, this study identifies the difference of types of vacant spaces according to each area. Second, based upon precedent researches, this study set up 3 perspectives and 9 analysis indices to investigate the areal characteristics of vacant space occurrence. Third, through the GIS analysis on the vacant spaces, this study tries to analyze the physical, commercial and social/institutional conditions of the areas in order to disclose the areal characteristics of vacant spaces occurrence.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.389-406
• /
• 2004

with the increasing popularity of regional studies, the importance of regional data has been recognized dramatically in recent years. However, due to potential problems from the intrinsic characteristics of aggregate regional data for the research, and incompatible regional units between source and target regional data units, the method for reorganizing the regional data units for a given research analysis should be required. In this regard, the purpose of this research is to review the significant interpolation methods for reorganizing the data units and, based on it, to propose the population weighted interpolation method. For the first purpose, areal weighted interpolation method, pycnophylactic method, dasymetric method, area-to-point method were reviewed. The proposed population-weighted interpolation method was applied to the case study of population census regional data in Erie County, NY, compared with areal weighted interpolation method, pycnophylactic method in terms of several statistical characteristics.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.4
• /
• pp.230-239
• /
• 2016

Objectives: We aimed to evaluate the effect of geographic units of analysis on measuring geographic variation in medical services utilization. For this purpose, we compared geographic variations in the rates of eight major procedures in administrative units (districts) and new areal units organized based on the actual health care use of the population in Korea. Methods: To compare geographic variation in geographic units of analysis, we calculated the age-sex standardized rates of eight major procedures (coronary artery bypass graft surgery, percutaneous transluminal coronary angioplasty, surgery after hip fracture, knee-replacement surgery, caesarean section, hysterectomy, computed tomography scan, and magnetic resonance imaging scan) from the National Health Insurance database in Korea for the 2013 period. Using the coefficient of variation, the extremal quotient, and the systematic component of variation, we measured geographic variation for these eight procedures in districts and new areal units. Results: Compared with districts, new areal units showed a reduction in geographic variation. Extremal quotients and inter-decile ratios for the eight procedures were lower in new areal units. While the coefficient of variation was lower for most procedures in new areal units, the pattern of change of the systematic component of variation between districts and new areal units differed among procedures. Conclusions: Geographic variation in medical service utilization could vary according to the geographic unit of analysis. To determine how geographic characteristics such as population size and number of geographic units affect geographic variation, further studies are needed.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.650-654
• /
• 1995

In digital video recording, higher areal density is strongly required for realizing digital VCRs. In order to accomplish higher areal density. we have implemented a system that has a narrow track pitch and can record data of about 30 Mbps(15 Mbps per channel) with the conventional S-VHS tapes. After computer simulation using the characteristics of the experimental system, we have selected appropriate equalizer and detection method by taking into account performance and cost (including hardware complexity). As a result, the selected equalizer and detection schemes are cosine equalizer and integrated de tection, respectively. The implemented system confirms reliable operation with a symbol error rate of less than $1{\times}10^{-4}$. In this paper, We will show the performance of the implemented system together with simulation results.

• Journal of Korean Society of Rural Planning
• /
• v.2 no.1
• /
• pp.31-38
• /
• 1996

As a rational decision-making process of county-level area development, this study designed 3-step framework : function-giving(areal analysis) on unit planning area by decision matrix of land suitability, check of typical characteristics of each function area and formulation of its future development strategies. Two alternatives were suggested as the areal analysis method, of which one is equal ordering / valuing technique of checking indices for land suitability classfication and the other preferential weighting technique. And then, under the algorithm specially defined in this study, land suitability maps(Fig.2,3) of the case study area (Seungju-county area, Chonnam-province, Korea) were drawn from the areal analysis results. By use of land suitability classification results, unique characteristics of typical function areas were defined (on 7 types of alternative 1 , 8 types of II ) and their future development strategies were formulated in the case study area, According to the categorization criteria in this study, all the villages of the case area were classfied as a suitable type of function areas illustrated in this study.