• 한국응용과학기술학회지
• /
• 제14권3호
• /
• pp.55-61
• /
• 1997

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of polyamic acid containing p-cyanoazobenzene. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about $140{\AA}^2$ and $100{\AA}^2$. Maxwell displacement currents were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• 한국식생활문화학회지
• /
• 제23권1호
• /
• pp.48-54
• /
• 2008

The purpose of this study was to measure the factors influencing customers’ value perception of foodservice in tourist area’s restaurant. A total of 273 questionnaires were completed. Structural equation model was used to measure the causal effects. Results of the study demonstrated that the confirmatory factor analysis model also indicated excellent model fit. The proposed model yielded a significantly better fit to the data than the parsimonious model and extended model. In proposed model, the effects of perceived sacrifice, overall service quality and customer satisfaction on perceived value were statistically significant. The effects of perceived value on loyalty intention were statistically significant. As expected, the overall service quality had a significant effect on customer satisfaction. Moreover, the customer satisfaction played a mediating role in the relationship between overall service quality and loyalty intention.

• Applied Biological Chemistry
• /
• 제31권1호
• /
• pp.86-91
• /
• 1988

경북(慶北) 월성산(月城産) Zeolite광석으로 조제(調製)한 $1{\sim}0.5,\;0,5{\sim}0.25,\;0.25{\sim}0.1$ 및 <0. 1mm의 4종류의 Zeolite 획분(劃分)의 비표면적(比表面積)이 수증기(水蒸氣) 및 EGME흡착법(吸着法)에 의(依)해 측정(測定)되었다. 수증기(水蒸氣) 및 EGME에 의(依)한 Zeolite의 비표면적(比表面積)은 각각 평균(平均) 106 및 $161m^2/g$으로 측정물질(測定物質)에 따라 약간의 차이(差異)가 있었으나 두방법(方法) 공히 입경(粒徑)의 대소(大小)에 따른 비표면적(比表面積)의 차이(差異)는 거의 없었다. $H_2O$ 분자경(分子徑)과 Mordenite공경(孔徑)을 근거(根據)하여 비교검토(比較檢討)한 결과측정(結果測定)된 비표면적(比表面積)은 실제표면적(實際表面積)의 일부분(一部分)으로 추정(推定)되었다. 따라서 Zeolite의 표면적(表面積)을 정확(正確)히 측정(測定)하기 위해서는 새로운 측정법(測定法)의 개발(開發) 필요성(必要性)이 인정(認定)된다.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.256-262
• /
• 2016

본 연구에서는 자동차 자동변속기의 핵심 부품인 아웃풋 허브 및 리액션 허브의 치형 미성형 구간의 최소화를 위한 배압 냉간 단조 성형 공법에 대한 유한요소해석을 수행하였다. 변위제어해석으로 펀치 하중 및 슬리브 배압력을 도출하였고, 도출된 하중 및 배압력을 이용한 하중제어해석을 수행하여 상호 검증을 하였다. 변위제어해석과 하중제어해석이 유사한 경향을 보였으며, 아웃풋 허브와 리액션 허브의 미성형 구간을 기준 이하로 만족시키기 위한 펀치 하중과 슬리브 배압력을 구하였다. 리액션 허브의 펀치 하중이 아웃풋 허브 보다 큰 이유는 상부 치형 가공 시 리액션 허브의 단면감소율이 아웃풋 허브 보다 크기 때문인 것으로 판단되며, 슬리브 배압력이 아웃풋허브와 리액션 허브에서 차이가 나는 것 또한 슬리브 단면적의 차이에 기인한 것으로 판단된다. 본 연구에서 제시한 배압 냉간 단조 성형 해석 과정과 결과를 적용한 실제 치형 가공의 미성형 구간 결과와 비교하여 검증 평가하였으며, 치형 제품의 품질 개선 및 생산성 향상을 위해 요구되는 성형가공 조건을 도출하는데 유용하게 활용될 수 있을 것이다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.256-256
• /
• 2017

The purpose of this study was to evaluate the effects of rice cultivars (Hangaru, Seolgaeng, Dasan-1 and Anda) on quality characteristics of rice beer. As for moisture content, Hangaru and Seolgaeng that are soft rice were higher than Dasan-1 and Anda as 14.48 and 14.62%, respectively. Dasan-1 and Anda showed higher protein content as compared to other varieties. As for amylose content, Hangaru turned out to be lower than other varieties as 17.71%, whereas reducing sugar content of Hangaru and Seolgaeng was higher than Dasan-1 and Anda. Results of hardness showed that Hangaru and Seolgaeng were measured lower than Dasan-1 and Anda. As a result of measuring alcohol content, pH and color of beer brewed by rice cultivars, no significant difference by cultivars was found, but measurement result of bitterness showed that beer brewed with Hangaru and Seolgaeng showed lower bitterness comparing to the beer brewed with Dasan-1 and Anda. The results of this study suggest that Hangaru and Seolgaeng are considered cultivars suitable for brewing quality of rice beer.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.49-59
• /
• 2008

The effects of design parameters on the pellet transport rate in the ejector system which is widely used in the production processes of automotive parts were investigated experimentally. The primary nozzle geometry, the area ratio (R) of nozzle exit cross-sectional area to mixing chamber cross-sectional area and the distance (S) from primary nozzle exit to mixing chamber entrance were considered as the design parameters. The area ratios of the primary nozzle were varied from R=0.10 to R=0.25, 0.30, 0.40 and 0.55. The primary nozzle was positioned at the non-dimensional distance (S/D) of 1.30, 1.87, 2.44, 3.00 and 3.75, normalized using the mixing chamber diameter (D). The design parameters were determined to run with high efficiency by measuring the pellets transport rate. The geometry and the area ratio (R) of the primary nozzle had an effect on the pellet transport rate of the ejector system, and the area ratio of R=0.3 was carefully selected after taking the minimum fluidization velocity and transport rate of applied pellets into account. The higher pellet transport rate with the variation of the distance (S/D) was observed at S/D of 2.44.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1001-1010
• /
• 2009

The study that unconfined compression strength of intact rock which is the most important factor to determine the bearing capacity effects discontinuities in rock mass has been carried out actively so far. However, the study which is related to lithological characters such as vesicle which is one of the primary characteristics of Basalt has barely been conducted. On this study, We have analyzed the correlation-ship between vesicle and unconfined compression strength and the effect on the bearing capacity, based on the reviewing on the changes of unconfined compression strength as the amount of vesicle of Basalt. It is impossible to analyze the amount of vesicle of Basalt as measuring unit. So it was analyzed by the ratio of the core sample's surface area and another area that vesicle takes up. Also, unconfined compression strength was calculated by point load test and unconfined compression strength test. The analysis shows that vesicle area ratio and unconfined compression strength have the exponential relationship and vesicle area ration is the factor to determine the bearing capacity of Basalt. It is considered that the reliability of calculating of the bearing capacity of Basalt will be improved as we study the correlation-ship between the vesicle area ratio and rock mass grade hereafter.

• 지적과 국토정보
• /
• 제52권2호
• /
• pp.35-51
• /
• 2022

본 연구는 해당 지자체의 전체 건축물중 시가화구역 내에 건축물이 얼마나 집중하고 있는지를 조사하였고 이를 '건축물 시가화집중도'라는 용어로 처음 사용하였다. 경북의 각 시군에 대하여 건축물 시가화집중도를 조사한 결과 건축물 시가화집중도가 낮을수록 노인인구 비율이 높으며 지자체의 주민 1인당 일반회계 지출액도 많은 것으로 나타났다. 본 연구를 통해 건축물 시가화집중도가 도시쇠퇴 정도와 도시재정의 효율성을 가늠할 수 있는 하나의 지표가 될 수 있음을 확인하였고 향후 축소도시계획 수립에 필요한 기초자료로 활용될 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권1호
• /
• pp.10-18
• /
• 2000

This paper describes the magnetic orientation of the intact and demembranated bull sperm treated by DTT or heparin in a 5,400 G static field. Semen samples collected from four bulls (Japanese Black) were mixed to the same sperm density. One percentage triton X-100 was used to extract the plasma membrane. The intact and demembranated sperm suspensions were treated with 20, 200, 2,000 mM DTT, 100, 1,000 or 10,000 units heparin solutions at $4{^{\circ}C}$ for 6 days. The decondensation of the sperm nuclei treated by DTT or heparin was examined by measuring the sperm head area at 1, 3, and 6 days. After measuring the area, each sperm sample was exposed to a 5,400 G static magnetic field generated by Nd-Fe-B permanent magnets for 24 hours at room temperature. Results showed that the decondensation of bull sperm nuclei was not induced by the heparin treatment, however, incomplete decondensation was induced by the DTT treatment. During the magnetic orientation, bull sperms treated by DTT or heparin had low percentages of long axis perpendicular to the magnetic lines of force. However, different aspects were obtained for long axis perpendicular orientations following treatment of DTT or heparin. Through the DTT treatment, the decline of long axis perpendicularly oriented percentages was due to the increase of long axis parallel orientation with the head of the flat plane perpendicular to the magnetic lines of force, whereas, using the heparin treatment, the decline of long axis perpendicular orientation was due to the increment of long axis parallel orientation with the head of the flat plane parallel to the magnetic lines of force. Also, percentages of the head of the flat plane perpendicular were decreased by the heparin treatment. These findings suggest that maintaining the structure of protamine in the chromatin is necessary for the sperm head to orient with its flat plane perpendicular, and maintaining the disulfide bond in the chromatin is necessary for the long axis of sperm to orient perpendicularly.