• Proceedings of the Korean Association for Survey Research Conference
• /
• 2000.06a
• /
• pp.57-73
• /
• 2000

Small area estimation is becoming important in survey sampling due to a growing demand for reliable small area statistics. In estimating means, totals, and other parameters for small areas of a finite population, samplie sizes for small areas are typically small because the overall sample size is usually determined to provide specific accuracy at a much higher level of aggregation than that of small area. The usual direct estimators that use the only information which is gotten from the sample in a given small area provide unreliable estimates. However, indirect estimators utilize the information from the areas related with a given small area, that is borrow strength from other related areas, and so give more accurate estimates than direct estimators. In this paper we investigate small area estimation methods such as synthetic, composite and empirical best linear unbiased prediction estimator, and apply them to real domestic data which is from the Survey of Hotels and Restaurants in In-Chon as of 1996 and then evaluate the performance of these methods by measuring average squared errors. This evaluation shows that indirect estimators, which are small area estimation methods, are more efficient direct estimator.

• Journal of Fashion Business
• /
• v.3 no.3
• /
• pp.1-14
• /
• 1999

This study is to analyze consumer's visiting fashion trade area. The purpose of this study, focused on Taegu fashion area, Dongsungro and Bum udong, consumer's spatical beravior, fashion- life-style, clothing purchasing type and Store- Image, etc. This study targeted 580 women aged from 15 to 25 visiting fashion trade area. The methods of measuring include consumer behavior scale, fashion life style scale, clothing purchasing type scale and Stor - Image scale. In process of statistics, the frequency was used to measure consumer's spatical behavior, MANOVA to measure, fashion life style and $\chi^2$ examination was employed to measure clothing purchasing type. The followings are the conclusions of this study ; 1. consumer's spatical behavior by FTA(fashion trade area) : Most people visiting Dongsungro A trade area and Bum udong trade area depart home, while Dongsungro B trade area from school. In case of Bum udong trade area, in particular, more people move from other trade area than people do in Dongsungro trade area. 2. Consumer spatical behavior means by FTA : Bus is far most common transportation. 3. The purpose of visit by FTA : Most people visit Dongsungro B trade area for shopping, while Bum udong trade area for shopping and as a place for appointment. 4. The visiting frequency by FTA : In case of both Dongsungro A.B trade area and Bum udong trade area, at least once a week is most common. Particularly in case of Bum udong trade area, the number of people visiting once every three months and once more than six months is almost same. 5. A company by FTA : People accompanied by the same sex friends are most common in Both Dongsungro A, B trade area and Bum udong trade area in case of Dongsungro B trade area. There is no case of people accompanied by family. 6. The purpose of purchasing fashion comodities by FTA : In case of Dongsungro A trade area for recreation. In case of Dongsungro B trade area and Bum udong trade area, because of affordable price. 7. A Brand - pursued tendency by FTA : Much higher in Dongsungro trade area than Bum udong trade area, among consumers. A character - pursued tendency by FTA : Higher in Dongsungro A than Dongsungro B,A practical tendency and symphatetic tendency Higher in Dongsungro B than Dongsungro A or Bum udong trade area. 8. A Store - Image scale by FTA : The quality of goods is more important to consumers in Dongsungro B than to consumers in Dongsungro A. The data - service and atmosphere are much more important to consumers in Dongsungro B than to consumers in Dongsungro A and Bum udong trade area. The convenience is more important to consumers in Dongsungro B Bum udong trade area than to consumers in Dongsungro A. 9. There is no significant difference among clothing purchasing types by FTA.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.212-217
• /
• 2020

We studied on the design of a sprinkler control system that communicates with the administrator's mobile through a wireless communication network and a sprinkler unit that sprays water on the vegetation area. This sprinkler control system consists of a communication module that receives an operation signal for the operation of the sprinkler unit from the administrator's mobile, and a control module that controls the sprinkler unit according to the operation signal received through the communication module. It is also designed to control sprinkler units by measuring temperature, humidity, light intensities, vibration and field images in the vegetation area in real time through sensors and camera for each of them and comparing them with established limit criteria. The sprinkler allows the administrator to control the sprinkler more easily because the administrator operates the sprinkler through the mobile from a distance, and emergency situations occur and can respond quickly.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.07a
• /
• pp.119-126
• /
• 2001

Chip-on-glass(COG) mounting of area array electronic packages was attempted by heating the rear surface of a contact pad film deposited on a glass substrate. The pads consisted of an adhesion(i.e. Cr or Ti) and a top coating layer(i.e. Ni or Cu) was heated by an UV laser beam transmitted through the glass substrate. The laser energy absorbed on the pad raised the temperature of a solder ball which is in physical contact with the pad, forming a reflowed solder bump. The effects of the adhesion and top coating layer on the laser reflow soldering were studied by measuring temperature profile of the ball during the laser heating process. The results were discussed based on the measurement of reflectivity of the adhesion layer. In addition, the microstructures of solder bumps and their mechanical properties were examined.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.726-736
• /
• 2018

This study determined how the upper body shape of elderly women changes with age in order to improve the fit of clothing worn by elderly women. Thirty-nine healthy elderly Japanese women had their body measurements taken by measuring tape and a 3D body line scanner (Hamamatsu Model #C9036-02) from December 2011 to March 2012 at a university in Tokyo. It was found that the shoulder line shortens in women between the ages of 70 and 74, but that the upper arm lengthens in women between the ages of 75 and 79. It was also found that the upper part of the scapular area rolls forward in women between the ages of 70 and 74, and that the point of the back which protrudes the most-the lower scapular area-rolls forward in women between the ages of 75 and 79. The results will be helpful for designing clothes for elderly women as their body shape changes with age.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.99-100
• /
• 2016

In a AC motor used by three phase inverter, the phase current must be measured to control instantaneous torque. It is expensive to use current sensor for measuring current in low cost motor. So, shunt resistor is used to measure current. But, the method sensing the phase current using shunt resistor cannot perform the vector control in high speed because of the area that impossible to restore three phase current. In this paper, predictive current is proposed for reconstructing the current in the impossible current sensing area that reduce the current ripple in TSSI(Three shunt sensing inverter) for PMSM.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.27-35
• /
• 2005

Non-point source pollution, which is found in soil, urban area, and agricultural area, is difficult to have its amount to be estimated. Moreover, it is hard to come up with a counterplan to cope with this pollutant. Hence, the watershed of Mandae-cheon located at the upstream of Soyang Lake was chosen as our site of study. We analyzed the relationship between precipitation level of each month and pollution load in the watershed by using statistical methods: measuring BOD, T-N and T-P - which are the causes of eutrophication - in the water; and analyzing the changes in water quality caused by precipitation level of nth.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.465-470
• /
• 2002

For measuring friction-factor of artificially-roughened surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. the measurement of leakage and pressure distribution through round-hole pattern specimen with different hole area is described and a method is discussed for determining the friction-factor experimentally. Results show that the friction-factor of the round-hole pattern surfaces is bigger than that of smooth surface and increases as increasing the hole area. A empirical friction factor model for round-hole pattern surface is defined as the Moody's friction factor formula.

• Imaging Science in Dentistry
• /
• v.31 no.3
• /
• pp.175-179
• /
• 2001

Cystic lymphangioma is an uncommon benign developmental tumor of the lymphatic system, seen rarely in adults. A 23-year-old man visited DKUDH complaining of the painless swelling in the right submandibular area. It was reported that swelling had increased since 5 months ago. Clinically, fltriangle uctuant and mobile mass was palpated at the right submandibular area. CT scan showed a large, well-defined, homogenous low density mass, measuring 5.0 × 2.5 × 4.0 cm. T1W MRI scan demonstrated a large, multiseptated homogenous low signal mass with septum and rim enhancement. Proton-density and T2W MRI scan showed mass of high signal intensity. MRI scan was able to delineate better the enhanced multi septation and extent of the lesion. Histopathologically, a lobulated cystic mass lined by a layer of flattened endothelium was observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.254-259
• /
• 2002

A variable air-gap type system is widely used for inductive precision position measurement systems. This type transducer has high sensitivity but lacks a linear measurement range due to structural nonlinearity. Furthermore, as measurement range increases, linearity error is also increased. The alternative is a variable overlap-area type system. The sensitivity of this type is determined by the initial air-gap dimension, keeps the original value and does not deteriorate linearity in spite of the variations of the measuring range.