• 환경영향평가
• /
• 제22권5호
• /
• pp.455-466
• /
• 2013

The aim of this study is to seek application plans of National Ecosystem Survey database based on comparison and examination of feasible analysis methods for distribution characteristics of alien plants. In order to set up a correlation analysis method between alien plants and environmental factors, we had reviewed the 3rd National Ecosystem Survey guide book and consequently, two kinds of analysis method were tested. One was 1/25,000 scale map boundary based analysis and the other was representative mountain area based analysis. In this study we restricted the research area to select reliable surveyed database from whole "2011 National Ecosystem Survey flora database" according to two major criteria. First, an area defined by 1/25,000 scale map boundary and representative mountain area where the number of surveyed flora records should be within top 20%. Second, land cover map should also be built up inside that area. As a result, 25 map boundaries and 25 representative mountain areas were extracted to be analyzed. To limit a boundary for every representative mountain area we had analyzed distribution of environmental factors around that area by manual inspection with SPOT-5 remote sensed satellite image then designated 3km buffer zone from each alien plant location in that area. After then, naturalized index (NI) and urbanized index (UI) was calculated and correlations analysis was carried out. With the result of correlation analysis by map boundary only agricultural land area showed significant value of r (0.4~0.6, correlated) and the rest of factors did not. In the case of representative mountain area, the result showed that agricultural land, road and forest area showed significant value of r (0.6~0.8, highly correlated) which was corresponding to existing researches. Therefore, representative mountain area based method is preferable when using the alien plants database of National Ecosystem Survey for species distribution analysis. And also, considering the way of database utilization is strongly suggested at the first stage of survey planning for promoting active use of national ecosystem survey database.

• 한국지리정보학회지
• /
• 제4권2호
• /
• pp.27-37
• /
• 2001

위성영상과 GIS 공간분석기법을 이용하여 아까시나무(Robinia pseudoacasia L.) 서식지의 공간적 분포 특성을 해석하고 아까시나무 밀원식물단지의 최적지를 선정함으로서 밀원식물단지 조성을 위한 과학적인 공간분석기법의 기초를 구축하였다. 다양한 공간분석을 위하여 지형(고도, 경사, 사면방향) 수계, 토양, 임상, 토지피복 및 기상(온도, 습도, 강수량)등의 자연환경 자료와 도시, 도로 등의 인문환경 자료를 이용하였다. 선형조합법과 요소조합법을 이용한 도면중첩법 분석결과 영천시의 아카시나무 최적지는 고경, 임고, 청통, 화남면 등의 지역으로 선정되었다. 아울러 위성영상과 GIS를 이용하여 영천지역의 아까시나무 밀원단지 적지분석을 수행한 결과 생장가능지역에 대한 현재의 분포는 42.53%, 최적지 지역은 26.77%로 나타났으며 영천시 전체 면적 중 아까시나무 밀원단지 최적지 면적은 $15.79km^2$로 분석결과 산출되었다. 본 연구 결과 위성영상과 GIS 응용기법은 아까시나무 밀원식물단지 적지선정에 효과적으로 적용될 수 있을 것으로 사료된다.

• 한국조경학회지
• /
• 제30권6호
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• 한국환경과학회지
• /
• 제26권2호
• /
• pp.133-146
• /
• 2017

This study aimed to develop strategies to re-establish the Park Nature Conservation Area in Bukhansan National Park, reflecting landscape ecological value by using the zonation program Marxan with Zones. Planning unit was set by watershed, and the basic data were mapped, considering topographical and ecological values. Mapped indicators were analyzed with the application framework of Marxan with Zones by indexing some indicators. The zones divided into Park Nature Conservation Area (Zone A), Park Nature Environment Area I(Zone B) which is reflected on the concept of Potential Park Nature Conservation Area and Park Nature Environment Area II(Zone C). The best solution for each of the scenarios was fixed through the sensitiveness analysis. From these, the final solution was selected considering five criteria including area ratio of conservation area and grouping. Lastly, the final solution was verified in the overlapped analysis with recent zonation. According to the results, the number of watersheds was 77, with an average area of $1,007,481m^2$. In terms of basic mapping and indexation, the slope index and number of landscape resources for topographical property were average 0.22 and 38 places, respectively. Biotope index was average 0.69 and legally protected species was 14 species, reflecting ecological values. As the social and economic indicators, trail index was average 0.04, and the number of tour and management facilities was 43 places. Through the framework of Marxan with Zones, the best solution for scenario 1 which was set by the highest conservation criteria was selected as the final solution, and the area ratio of Park Nature Conservation Area and grouping was excellent. As the result of overlapped analysis, suggested zonation of the Park Nature Conservation was better than the recent zonation in the area raito (28.3%), biotope grade I(15.4%) and the distribution points (10 places) of legally protected species with verification of proper distribution of conservation features according to the zone.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.256-262
• /
• 2016

본 연구에서는 자동차 자동변속기의 핵심 부품인 아웃풋 허브 및 리액션 허브의 치형 미성형 구간의 최소화를 위한 배압 냉간 단조 성형 공법에 대한 유한요소해석을 수행하였다. 변위제어해석으로 펀치 하중 및 슬리브 배압력을 도출하였고, 도출된 하중 및 배압력을 이용한 하중제어해석을 수행하여 상호 검증을 하였다. 변위제어해석과 하중제어해석이 유사한 경향을 보였으며, 아웃풋 허브와 리액션 허브의 미성형 구간을 기준 이하로 만족시키기 위한 펀치 하중과 슬리브 배압력을 구하였다. 리액션 허브의 펀치 하중이 아웃풋 허브 보다 큰 이유는 상부 치형 가공 시 리액션 허브의 단면감소율이 아웃풋 허브 보다 크기 때문인 것으로 판단되며, 슬리브 배압력이 아웃풋허브와 리액션 허브에서 차이가 나는 것 또한 슬리브 단면적의 차이에 기인한 것으로 판단된다. 본 연구에서 제시한 배압 냉간 단조 성형 해석 과정과 결과를 적용한 실제 치형 가공의 미성형 구간 결과와 비교하여 검증 평가하였으며, 치형 제품의 품질 개선 및 생산성 향상을 위해 요구되는 성형가공 조건을 도출하는데 유용하게 활용될 수 있을 것이다.

• 보건행정학회지
• /
• 제1권1호
• /
• pp.42-53
• /
• 1991

Analysis of health care utilization is very important for health care policy development. Traditional studies of health care utilization were focused on measuring the level of health care utilization and on analyzing the determinants of health care utilization in the defined areas and populations. But there were some limitations in comparing the health care utilizations rates in traditional studies because so many factors were to be considered. Small area analysis is a method used to demonstrate substantial variations in health care utilization with popualtion-base use rates among similar geographic areas. This review discusses the methods, magnitude and trend of geographic variations, factors influencing small area variations, and makes suggestions for further study. Finally, the article discusses the necessity and feasibility of small area analysis in Korea.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.36-41
• /
• 2011

Nowadays, the solar expose right is very important with people's life. Therefore, in calculating the sunshine hours, the point analysis and area analysis methods are used in previous studies. Previous two methods have merits and faults. Therefore, ray-tracing method is used as a alternative. Ray-tracing method is adopted by the software of Autodesk Ecotect which is a widely used program by the architectural company and academic university. In this study first, ray-tracing methodology is studied with how to calculate the overshadowing area and, secondly, the sensitivity of the two major factors, overshadowing accuracy and sky subdivision, is analyzed. With these results, appropriate application of the ray-tracing method is presented.

• 한국입자에어로졸학회지
• /
• 제7권3호
• /
• pp.99-108
• /
• 2011

To establish area specific control strategies for the reduction of the ozone concentration, the Ozone Isopleth Plotting Package for Research(OZIPR) model has been widely used. However, the model results tend to changed by various input parameters such as the background concentration, emission amount of NOx and volatile organic compounds (VOCs), and meteorological condition. Thus, sensitivity analysis should be required to ensure the reliability of the result. The OZIPR modeling results for five local government districts in the Seoul Metropolitan Area (SMA) in June 2000 were used for the sensitivity analysis. The sensitivity analysis result showed that the modeling result of the SMA being VOC-limited region be still valid for a wide range of input parameters' variation. The estimated ozone concentrations were positively related with the initial VOCs concentrations while were negatively related with the initial NOx concentrations. But, the degree of the variations at each local district was different suggesting area specific characteristics being also important. Among the five local governments, Suwon was chosen to identify other variance through the period from April to September in 2000. The monthly modeling results show different ozone values, but still showing the characteristics of VOCs-limited region. Limitations due to not considering long range transport and transfer from neighbor area, limitation of input data, error between observed data and estimated data are all discussed.

• 자원환경지질
• /
• 제29권5호
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권1호
• /
• pp.51-61
• /
• 2016

Purpose: To improve and establish functions for public health centers in rural public, an analysis will be done on arrangement plan and area by function for public health centers in farming and fishing villages. After finding out this relationship and architectural characteristics, spatial organization and area ratio for providing efficient medical service and the relationship between the two will be examined. Methods: 8 of them were selected and site visit and interview with the person in charge were conducted to investigate the current status. The drawings collected for analysis were input as CAD data and schematized. The relationship between the arrangement type and area for the public health centers in farming and fishing villages was analyzed and based on this, an analysis was done on agricultural scale and characteristics, and putting these analyzed results together, an appropriate method of improvement was proposed for spatial organization by function for public health centers in farming and fishing villages and to provide efficient service. Results: Firstly, the Plan types found in the public health centers in farming and fishing villages could be classified into three including single-type, multiple-type and radial-type. Secondly, according to an analysis of areas by function, in the case of treatment function, there was a difference in the area ration for selective treatment. This ratio is considered to be greatly influenced by the project each public health center focuses on. Thirdly, I could become aware of the relationship between spatial organization and area ratio based on the analysis of arrangement and area derived above. Implication: As the data to refer to in future research on spatial organization for public health centers, if the object of analysis becomes more expanded and investigated, it will be utilized in detail for spatial planning of public health centers, thereby being expected to contribute to more efficient and qualitatively enhanced medical service provided by public health centers.