• 한국항공운항학회지
• /
• 제13권4호
• /
• pp.43-57
• /
• 2005

Traditionally aircraft had descended in steps to level at the MDA(Minimum Descent Altitude) during the conduct of non-precision approach. This "de-stabilized" method of flying an instrument approach procedure is considered as a major contributing factor in CFIT(Controlled Flight Into Terrain) accident and increasing pilot workload. In the effort to reduce CFIT accident and pilot workload, VNAV(Vertical Navigation) Approach has been suggested as means to manage the vertical component of non-precision approach procedure.[1] But In the actual circumstances in Korea, VNAV has not been using to reduce them because of many restriction facts and no published VNAV chart in particular airport. Therefore we are suggesting Constant Vertical Speed Approach Method, which is required few restriction facts, and the pilots who are using this method will experience a similar method like a Glideslope during proceeding non-precision approach. Consequently, We are expecting to reduce CFIT accidents and pilot workload.

• The Journal of the Acoustical Society of Korea
• /
• 제18권4E호
• /
• pp.37-42
• /
• 1999

This paper concerns a modified perturbation method and a least square approach to synthesize an optimum beam pattern of a thinned sensor array with respect to element spacing. In the modified perturbation, the antenna spacing is perturbed iteratively such that the sidelobes are equalized via a linear programming approach. The least square approach is proposed to improve the array performance for the thinned array using the fact that the number of sidelobes is more than the number of element spacings. It is demonstrated that the least square approach performs better than the modified perturbation method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권3호
• /
• pp.300-306
• /
• 2013

This paper presents a new method for constructing bilingual lexicons through a pivot language. The proposed method is adapted from the context-based approach, called the standard approach, which is well-known for building bilingual lexicons using comparable corpora. The main difference between the standard approach and the proposed method is how to represent context vectors. The former is to represent context vectors in a target language, while the latter in a pivot language. The proposed method is very simplified from the standard approach thereby. Furthermore, the proposed method is more accurate than the standard approach because it uses parallel corpora instead of comparable corpora. The experiments are conducted on a language pair, Korean and Spanish. Our experimental results have shown that the proposed method is quite attractive where a parallel corpus directly between source and target languages are unavailable, but both source-pivot and pivot-target parallel corpora are available.

• 한국디지털건축인테리어학회논문집
• /
• 제11권2호
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.540-544
• /
• 1998

Compliance calibration method is frequently used to determine $G_IC$ from the DCB composite specimen. However, the method requires at least 4 to 5 fracture test (loading-unloading) records. In this study, $G_IC$ of unidirectional graphite/epoxy DCB composites was determined from the elastic work factor approach which uses a single fracture test record. In order to inspect the validity of the elastic work factor approach, $G_IC$ determined from the elastic work factor approach was compared to that of determined from the compliance calibration method. It was shown that $G_IC$ determined from the elastic work factor approach was comparable to that determined from the compliance calibration method. That is, the elastic work factor approach can be used to determine $G_IC$ of unidirectional graphite/epoxy DCB specimen from a single fracture record.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.117-121
• /
• 2005

In this paper, an approximate time-effective approach to rigid-plastic finite element method is presented with its solution scheme and a volume compensation method is proposed to simulate rotary forging processes. The applicability is examined by comparing the results obtained by the presented approach with those by the conventional approach. The approach is applied to simulation of a rotary forging process fur a wheel bearing assembly. The analyzed results are compared with the experimental results.

• 한국초등과학교육학회지:초등과학교육
• /
• 제23권2호
• /
• pp.110-115
• /
• 2004

This study investigated the effects of the project approach in science teaching on scientific knowledge and attitudes, science related attitudes of the 6th grade students. Students engaged in the study were divided into comparison group and experimental group. The project approach was applied to the experimental group with various activities while the traditional teaching method was applied to the comparison group with science text book and teacher's guidebook. The data were statistically analysed by SPSS WIN 8.0. The results are as follows: The students of the project approach in science teaching made significant progress in scientific knowledge and attitudes, science related attitudes (p<.05). The students in the project approach was more effective in improvement of curiosity, critical thinking, positive thinking than the traditional teaching method. And the project approach was good for causing interest and helping student's science learning.

• 한국수자원학회논문집
• /
• 제39권3호
• /
• pp.253-259
• /
• 2006

기존의 거의 모든 수문학적 연구에 있어서, 시스템의 특성을 파악한 뒤 예측을 실시하는 표준접근법이 채택되어왔다. 그러나 최근 들어 시스템의 특성분석에 앞서 예측을 실시하고, 상태공간 매개변수가 시스템의 특성분석단계가 아닌 예측단계에서 평가되는 가역접근법이 제안되었다. 본 연구에서는 최근에 제안된 가역접근법과 기존에 널리 적용되어온 표준접근법을 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 자료에 적용함으로써, 가역접근법의 적용성을 검토하고 카오스 시계열의 특성을 알아보았으며, 카오스이론이 적용된 비선형 예측기법으로는 부분근사화 기법을 이용하였다. 카오스 특성 분석을 통해, 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 시계열 자료 모두에서 카오스 특성이 나타남을 알 수 있었다. 200일에 대한 1, 3, 5일 예측 결과, 가역접근법이 표준접근법에 비해 우수함을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.409-413
• /
• 2018

In this paper, He's Variational Approach (VA) is used to solve high nonlinear vibration equations. The proposed approach leads us to high accurate solution compared with other numerical methods. It has been established that this method works very well for whole range of initial amplitudes. The method is sufficient for both linear and nonlinear engineering problems. The accuracy of this method is shown graphically and the results tabulated and results compared with numerical solutions.

• Journal of the Korean Statistical Society
• /
• 제32권4호
• /
• pp.411-423
• /
• 2003

In this paper we develop a method for calculating a probability that a particular generalized variance is the smallest of all the K multivariate normal generalized variances. The method gives a way of comparing K multivariate populations in terms of their dispersion or spread, because the generalized variance is a scalar measure of the overall multivariate scatter. Fully parametric frequentist approach for the probability is intractable and thus a Bayesian method is pursued using a variant of weighted Monte Carlo (WMC) sampling based approach. Necessary theory involved in the method and computation is provided.