• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.4
• /
• pp.43-57
• /
• 2005

Traditionally aircraft had descended in steps to level at the MDA(Minimum Descent Altitude) during the conduct of non-precision approach. This "de-stabilized" method of flying an instrument approach procedure is considered as a major contributing factor in CFIT(Controlled Flight Into Terrain) accident and increasing pilot workload. In the effort to reduce CFIT accident and pilot workload, VNAV(Vertical Navigation) Approach has been suggested as means to manage the vertical component of non-precision approach procedure.[1] But In the actual circumstances in Korea, VNAV has not been using to reduce them because of many restriction facts and no published VNAV chart in particular airport. Therefore we are suggesting Constant Vertical Speed Approach Method, which is required few restriction facts, and the pilots who are using this method will experience a similar method like a Glideslope during proceeding non-precision approach. Consequently, We are expecting to reduce CFIT accidents and pilot workload.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4E
• /
• pp.37-42
• /
• 1999

This paper concerns a modified perturbation method and a least square approach to synthesize an optimum beam pattern of a thinned sensor array with respect to element spacing. In the modified perturbation, the antenna spacing is perturbed iteratively such that the sidelobes are equalized via a linear programming approach. The least square approach is proposed to improve the array performance for the thinned array using the fact that the number of sidelobes is more than the number of element spacings. It is demonstrated that the least square approach performs better than the modified perturbation method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.3
• /
• pp.300-306
• /
• 2013

This paper presents a new method for constructing bilingual lexicons through a pivot language. The proposed method is adapted from the context-based approach, called the standard approach, which is well-known for building bilingual lexicons using comparable corpora. The main difference between the standard approach and the proposed method is how to represent context vectors. The former is to represent context vectors in a target language, while the latter in a pivot language. The proposed method is very simplified from the standard approach thereby. Furthermore, the proposed method is more accurate than the standard approach because it uses parallel corpora instead of comparable corpora. The experiments are conducted on a language pair, Korean and Spanish. Our experimental results have shown that the proposed method is quite attractive where a parallel corpus directly between source and target languages are unavailable, but both source-pivot and pivot-target parallel corpora are available.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.540-544
• /
• 1998

Compliance calibration method is frequently used to determine $G_IC$ from the DCB composite specimen. However, the method requires at least 4 to 5 fracture test (loading-unloading) records. In this study, $G_IC$ of unidirectional graphite/epoxy DCB composites was determined from the elastic work factor approach which uses a single fracture test record. In order to inspect the validity of the elastic work factor approach, $G_IC$ determined from the elastic work factor approach was compared to that of determined from the compliance calibration method. It was shown that $G_IC$ determined from the elastic work factor approach was comparable to that determined from the compliance calibration method. That is, the elastic work factor approach can be used to determine $G_IC$ of unidirectional graphite/epoxy DCB specimen from a single fracture record.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.117-121
• /
• 2005

In this paper, an approximate time-effective approach to rigid-plastic finite element method is presented with its solution scheme and a volume compensation method is proposed to simulate rotary forging processes. The applicability is examined by comparing the results obtained by the presented approach with those by the conventional approach. The approach is applied to simulation of a rotary forging process fur a wheel bearing assembly. The analyzed results are compared with the experimental results.

• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.110-115
• /
• 2004

This study investigated the effects of the project approach in science teaching on scientific knowledge and attitudes, science related attitudes of the 6th grade students. Students engaged in the study were divided into comparison group and experimental group. The project approach was applied to the experimental group with various activities while the traditional teaching method was applied to the comparison group with science text book and teacher's guidebook. The data were statistically analysed by SPSS WIN 8.0. The results are as follows: The students of the project approach in science teaching made significant progress in scientific knowledge and attitudes, science related attitudes (p<.05). The students in the project approach was more effective in improvement of curiosity, critical thinking, positive thinking than the traditional teaching method. And the project approach was good for causing interest and helping student's science learning.

• Journal of Korea Water Resources Association
• /
• v.39 no.3 s.164
• /
• pp.253-259
• /
• 2006

In almost all previous hydrological studies, the standard approach adopted for nonlinear time series analysis is to perform system characterization first followed by forecasting. However, a practical inverse approach for forecasting nonlinear hydrological time series was proposed recently To investigate the applicability standard approach method and inverse approach, this study used a theoretical time series (Mackey-Glass time series) and daily streamflows of the Bear River in Idaho. To predict a theoretical time series and daily streamflow, this study used local approximation method. From chaos analysis, chaotic characteristics are found in daily streamflow of the Bear River in Idaho. Resulting from 1, 3 and 5-day prediction, inverse approach method is shown to be better than the standard approach for a theoretical chaotic time series and daily streamflow.

• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.409-413
• /
• 2018

In this paper, He's Variational Approach (VA) is used to solve high nonlinear vibration equations. The proposed approach leads us to high accurate solution compared with other numerical methods. It has been established that this method works very well for whole range of initial amplitudes. The method is sufficient for both linear and nonlinear engineering problems. The accuracy of this method is shown graphically and the results tabulated and results compared with numerical solutions.

• Journal of the Korean Statistical Society
• /
• v.32 no.4
• /
• pp.411-423
• /
• 2003

In this paper we develop a method for calculating a probability that a particular generalized variance is the smallest of all the K multivariate normal generalized variances. The method gives a way of comparing K multivariate populations in terms of their dispersion or spread, because the generalized variance is a scalar measure of the overall multivariate scatter. Fully parametric frequentist approach for the probability is intractable and thus a Bayesian method is pursued using a variant of weighted Monte Carlo (WMC) sampling based approach. Necessary theory involved in the method and computation is provided.