• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.172-175
• /
• 2004

This paper analyzes the effects of Ge profiles shape of SiGe heterojunction bipolar transistors (HBT's) for high frequency application. Device simulations using ATLAS/BLAZE for the SiGe HBT with trapezoidal or triangular Ge profile are carried out to optimize the device performance. An HBT with $15\%$ triangular Ge profile shows higher cut-off frequency and DC current gain than that with $19\%$ trapezoidal Ge profile. The cut-off frequency and DC gain are increased from 42GHz to 84GHz and from 200 to 600, respectively. The SiGe HBT has been fabricated using a production CVD reactor.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.569-575
• /
• 2018

The stability of shallow cavities with an arbitrary profile is a difficult issue in geotechnical engineering. This paper investigates this problem on the basis of the upper bound theorem of limit analysis and the Hoek-Brown failure criterion. The influence of pore pressure is taken into consideration by regarding it as an external force acting on rock skeleton. An objective function is constructed by equating the internal energy dissipation to the external force work. Then the Lagrange variation approach is used to solve this function. The validity of the proposed method is demonstrated by comparing the analytical solutions with the published research. The relations between shallow and deep cavity are revealed as well. The detaching curve of cavity roof with elliptical profile is obtained. In order to facilitate the application of engineering practice, the numerical results are tabulated, which play an important role in tunnel design and stability analysis of roof. The influential factors on potential collapse are taken into consideration. From the results, the impact of various factors on the extent of detaching is seen intuitively.

• 한국컴퓨터정보학회논문지
• /
• 제17권6호
• /
• pp.131-144
• /
• 2012

모델 기반 개발 방법은 모바일 어플리케이션 개발의 특성을 잘 수용할 수 있으므로 모바일 어플리케이션 개발에 적용하기 위한 다양한 연구가 진행 중이다. 그러나 모델 기반 개발 수행 시 PIM과 PSM 설계에 필요한 UML 프로파일의 체계적인 개발 관련 연구는 부족한 상황이며, 프로파일을 활용한 모델 변환 기법 관련 연구도 요구되고 있다. 이에 본 논문에서는 모바일 어플리케이션의 PIM과 PSM 설계에 적용할 UML 프로파일 구성 기법과 이를 활용한 모델 변환 기법을 제안한다. 제안한 기법은 모바일 어플리케이션의 특성을 반영하여 스테레오타입을 분류한 후 프로파일 구성 지침에 따라 각 모델에 적용할 프로파일을 구성한다. 프로파일을 적용하여 구성한 PIM은 모델 변환 절차에 따라 프로파일 간 대응 규칙에 의하여 초기 PSM으로 변환되며, 모바일 플랫폼의 세부정보를 반영하여 구성한 PSM 템플릿을 적용하여 정제한 PSM으로 변환 생성된다. 제안한 기법의 유용성을 확인하기 위하여 안드로이드 기반 위치 기록 어플리케이션을 대상으로 제안 기법을 적용하여 개발하고, 기존의 기법들과 비교를 수행하였다.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.25-42
• /
• 2010

One of the important roles of worflow is color management. In general, color management technique, which is called CMS(color management system), is a method to solve problems that show different characteristics of color regeneration in output devices, and the characteristics of output devices is created in data file called ICC(International Color Consortium) profile. In addition, ICC profile is used to manage color in workflow, and includes other functions, process management and printing quality management. In domestic printing market, workflow is in the pipeline at rapid speed along with CTP, and use of ICC profile required for color management is also in rapid progress. Therefore, this paper produced optimal ICC profile through experiment from the work of linearizing devices used in each field to color conversion work. Moreover, the paper confirmed how ICC profile will be used in printing field. In the profiling experiment based on hardcopy proofing, photographed copy and chrominance were compared by printing out in proof the image created through application and color conversion with the use of camera profile and proof profile produced in colorimetric method. By evaluating if color is expressed accurately from input to output through colorimetric color conversion experiment as above, the paper intended to propose color management method using optimal profile in printing process.

• Journal of Pharmaceutical Investigation
• /
• 제34권3호
• /
• pp.201-207
• /
• 2004

In order to develop an optimum formulation for iontophoretic flux of vitamine C 2-phosphate (VCP), we have prepared three different hydrogels containing VCP, using carbopol, HPMC and poloxamer, and iontophoretic flux through hairless mouse skin from these hydrogels was carried out. Drug stability in phosphate buffer (PBS) solution (pH 7.4) with and without current application was studied. The effect of various factors, such as drug concentration, current density, and current profile on skin flux was also investigated. Stability study indicated that VCP in PBS (pH 7.4) solution was stable under the experimental condition, irrespective of the presence of current. Cathodal delivery increased the flux markedly, whereas the anodal and passive flux was negligible. Thus, cathodal delivery was used in all experiments. Flux increased as the drug concentration (2.5, 5.0, 7.5%) and current density $(0.2,\;0.4,\;0.6\;mA/cm^2)$ increased. Pulsed application of the current showed lower flux than constant current application. The results obtained suggest that VCP can be delivered into the skin and the amount delivered can be controlled by varying hydrogel, current density, drug concentration and current application profile.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.1-13
• /
• 2013

This study found fit optimum C, M, Y, K solid density and $CIEL^*a^*b^*$ value to paper & ink as well as check about printing machine state for color management in H-UV waterless off-set printing first. These values applied to GRACoL G7 calibration method. This method is one of color standard management method of printing. GRACoL G7 calibration method is possible stable tone reappearance by controlling gray balance by NPDC(Natural Printing Density Curve). Also, this study used values to make device profile as result that is gotten by application of GRACoL G7 calibration method. This profile was applied to CMS(Color Management System) of H-UV waterless off-set printing, and the result was possible by color management that correspond in printing quality standard of ISO 12647-2 and GRACol 2006 specifications.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.43-47
• /
• 2006

Superposition of three wave trains on finite depth is investigated. This paper is focused on how to improve the linear superposition of three waves. This was realized by introducing the scheme. The idea of the scheme is based on a fixed point approach. Application of the scheme to the superposition makes it possible to obtain a wave profile of wave-wave interaction. With the help of FFT, it was possible to analyze high-order nonlinear frequencies for three interacting Stokes' waves on finite depth.

• 대한방사선치료학회지
• /
• 제7권1호
• /
• pp.103-110
• /
• 1995

Dynamic wedge system has been introduced to modify the beam profile and to make homogeneous isodose curves in the mass of irregular shape. Before the clinical use of dynamic wedge, several factors such as wedge transmission factor, dose profile, percent depth dose, and wedge angle have to be measured quantitatively. Film dosimetry is used to evaluate these factors in this study. A comparison of the result of the dynamic wedge to physical wedge system is made. A positive result for the application of the dynamic wedge to clinic is derived even though there is a limitation in accuracy of the dosimetry system used. To measure all factors quantitatively, more accurate dosimetry systems are required.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.453-458
• /
• 1992

본 연구에서는 유한요소법에 바탕을 둔 최적공정설계법을 이용하여 압출 금형 형상의 최적설계를 실시하였다.설계의 결과를 참고문헌에서 발췌한 이론해와 비교 하였으며, 축대칭 압출공정에서 압하율, 마찰, 재료특성 등이 금형의 최적형상에 미치 는 영향에 대하여 조사하였다.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.4234-4243
• /
• 2012

USN(Ubiquitous Sensor Network) 응용 S/W는 다양한 타겟 운영체제의 핵심모듈들을 기반으로, 다양한 종류의 센서 노드들을 유기적으로 제어하는 복잡한 특징을 가진다. 현재 USN 응용 분야에서도 효율적으로 S/W를 개발하기 위한 다양한 연구가 진행되고 있다. S/W의 개발생산성을 높이기 위해서는 프로덕트라인 기반 개발과 같이 도메인에 따라 어플리케이션들의 핵심 공통기능을 명세하고, 어플리케이션의 워크플로우에 따라 핵심 공통기능에 가변적인 기능만을 취사 선택하여 개발하는 방법이 효율적이다. 이러한 방법을 USN 도메인에 적용하기 위해서는 USN 응용 S/W의 특성과 프로덕트라인 기반 개발의 특성을 일관성 있는 하나의 뷰로 명세 가능하여야 한다. 그러나 일반적인 UML 표기법만으로는 이러한 특성을 효과적으로 명세하기 어렵다. 본 논문에서는 이러한 문제점을 해결하기 위하여 기존 UML의 확장 메카니즘인 프로파일을 이용하여 USN 어플리케이션의 특성과 프로덕트라인 기반 개발의 특성을 효과적으로 명세할 수 있는 기법을 제시한다. 제시하는 프로덕트라인 기반 USN 응용 개발을 위한 UML 프로파일은 어플리케이션 개발자에게 USN이나 프로덕트라인 기반 개발에 특화된 새로운 설계기법이나 도구 등의 추가적인 자원을 요구하지 않고, 기존의 UML과 지원도구를 활용하여 효과적으로 프로덕트라인 기반의 USN 응용 개발을 가능하게 한다.