• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.12 no.sup1
• /
• pp.1-5
• /
• 2009

2007 Korean National Growth Charts were published by The Korean Pediatric Society and Korea Centers for Disease Control and Prevention in October, 2007. These Growth Charts are composed of Growth Curves and Tables, which are based on the principles such as pooling data of the different generations and application of LMS method. In this review, several tips of application using these new charts are summarized with points of view both in clinical and research fields.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.110-113
• /
• 1999

Mekuro-Kazoen BLDG. is complex of office, hotel, hotel, and banquet hall, built in 1991, Tokyo, Japan. This building suggest us various issue about the representation of traditionality in current architecture. We can find the possibility of representation of traditionality in large complex, in past, rarely applicated. Even in Japan, such trial in official building as New Office Building of Tokyo in Sinzuku shows a application only in the elevation plan. In Mekuro-Kazoen BLDG. the application of traditionality are fond not only in external appearance, but also in interior design. And the modernity and traditionality in this building are represented simultaneously not deterioating each other. the issues of representation of traditionality in interior design should be succeed not only in now but also in future. The method of application need to be studied and improved. The fields of application also should be extended such as large complex buildings and future-oriented buildings.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.271-276
• /
• 2003

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) of Terra and Aqua satellites, launched in December 1999 and May 2002, has been directly received by Korea Aerospace Research Institute (KARI) ground station facility from July 2002. MODIS scans a swath width of 2330 km that is sufficiently wide to cover Korean peninsular, Yellow and East Sea at once. The MODIS has 36 spectral bands between 0.415 $\mu\textrm{m}$ and 14.235 $\mu\textrm{m}$, i.e., through the visible into the thermal infrared. MODIS has been observed active fires, floods, smoke transport, dust storms, severe storms since February of 2000. The satellite imagery obtained through the MODIS will be utilized for many application such as national territorial management, agriculture, natural environment, atmosphere and ocean, etc. In this study is to introduce various application field of MODIS imagery and data processing system.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.4
• /
• pp.20-31
• /
• 1983

Study was made for the work study application in industry by sampling one thousand manufacturing companies. Small and medium industries are far behind in systematic application of the work study technique. Large industries are gradually introducing the work study technique systematically in line with the nation-wide quality control movement. Major sessions that the industries feel important in IE curriculum were QC, Work study and Cost accounting followed by the Organization theory, Industrial psychology, and Labor relations. Most of the industries were still less aware of the sophisticated fields such as OR, SE and Simulation. They put more emphasis on QC and TQC and as a result, work study should be closely bounded to TQC in order to systemize the work study application in the future.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.57-60
• /
• 2008

As the technology of a large scale battery have advanced, it's application to the electric power network have been active in foreign country. By providing the electric power energy stored in the electric power storage system when needed, there are many advantages that it is able to reduce the gap between the electric power demand and supply for day and night to increase capacity factor, to upgrade the electric power quality degraded from the unbalance between power demand and supply and to compensate the fluctuation of wind power plant and photovoltaic power generation. In this study, the current application of electric power storage system using battery is introduced in detail, and I have thought out it's application fields based on the foreign examples. These are demand side response, upgrade of the power quality, stabilization of fluctuation of renewable energy and distributed generation for filling elapse.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.203-223
• /
• 2018

The development of two-dimensional graphene layers has recently attracted considerable attention because of its tremendous application in various research fields. Semi-metal materials have received significant attention because of their excellent biocompatibility as well as distinct physical, chemical, and mechanical properties. Taking into account the technical importance of graphene in various fields, such as complementary metal-oxide-semiconductor technology, energy-harvesting and -storage devices, biotechnology, electronics, light-emitting diodes, and wearable and flexible applications, it is considered to be a multifunctional component. In this regard, material scientists and researchers have primarily focused on two typical problems: i) direct growth and ii) low-temperature growth of graphene. In this review, we have considered only cold growth of graphene. The review is divided into five sections. Sections 1 and 2 explain the typical characteristics of graphene with a short history and the growth methods adopted, respectively. Graphene's direct growth at low temperatures on a required substrate with a well-established application is then precisely discussed in Sections 3 and 4. Finally, a summary of the review along with future challenges is described in Section 5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1307-1317
• /
• 2010

The various models that estimate the reliability of application software system had been made. But most of the existing models are inconvenient to industrial fields because so complicated mathematic methods as method of estimation parameter have been used. The two purposes of this paper are to develop the reliability estimation model which was easily applied to industrial fields, and to prove no differences between the existing models and the developed model. Therefore the reliability of software system and handled informations are upgraded by far.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1068-1075
• /
• 2003

Today, satellite remote sensing and geographic information systems plays an important role as a advanced science and technology, and becomes a superpower tool of the study and research in various fields of Earth Science. This study reviews the application of satellite remote sensing and geographic information systems for many specialists in the fields of the fishery and ocean science. In future, satellite remote sensing and geographic information systems will be greatly used to observed, monitor and predict various phenomena associated with the fisheries and oceans, in order to seek safety in a natural disaster, and menage and conserve the fisheries and resources and the oceanic environments.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.775-780
• /
• 2015

Because of the advantages such as the zero electrical resistance effect that disappears in the vicinity of the absolute temperature and the magnetic levitation effect, the superconducting applications are being tried in a variety of fields. But, those have faced many difficulties in the practical use because of the difficulty for the realization of the superconducting critical temperature. Recently, however, because the high-temperature super conductors was discovered newly which show superconductivity more than $30^{\circ}K$, the application researches based on it are being tried in various fields. Therefore, this paper examines the possibilities and issues by surveying the high temperature superconducting applications to electrical power system.