• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.837-842
• /
• 2007

This study was conducted to test the effect of residual Al on plankton community after dissolved air flotation (DAF) application. Growth rate of phytoplankton after DAF application ($0.37day^{-1}$) was about 2 times lower than that before DAF application ($0.70day^{-1}$). Under the condition of addition of nitrogen and phosphorus without light, growth rate phytoplankton in treatment without residual Al increased in difference with showing the negative growth rate in treatment with residual Al. Under the condition of light without addition of nutrient, growth rate of phytoplankton was no noticeable difference between the before and after DAF application. The relatively high settling rate (0.47 m/day) was observed in treatment after DAF application. Although the abundance of rotifer decreased, the abundance of copepod and cladoceran such as Daphnia galeata, Diaphanosoma sp. and Bosmina longirostris with relative higher grazing was no noticeable difference between the before and after DAF application. In the treatments before and after DAF application with zooplankton, growth rate of phytoplankton was $0.41{\pm}0.08day^{-1}$, $0.20{\pm}0.03day^{-1}$, respectively. This difference was in treatment after DAF application similar with those in treatments before and after DAF application without zooplankton. Those indicate that the filter-feeding effect of zooplankton on phytoplankton community may be not changed by residual Al after the DAF application. These results suggest that residual Al after DAF application be to improve water quality by inhibition of growth rate as well as increasing settling rate of phytoplankton.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.235-239
• /
• 1993

To determine the optimal application level of fertilizers, nitrogen, phosphate, potassium and lime in ramie(Beohmeria nivia Hooker et Arnot), the experiments were conducted for four years from seedling stage propagated by suckers to fully-grown stage under various comibinations of $N, P_2O_5, O$ and lime. Increasing in application rate of N and $K_2$O enhanced stem growth of ramie greatly, and it appeared that lime application also had large effect on increase of stem growth. Yield increased greatly by increasing of application rate with two or three times in N and two times in $K_2$O as much as the standard application rate of fertilizers N-$P_2O_5$-$K_2$O =9-3-9kg/l0a. Especially, treatment with 18kg N, 3kg $P_2O_5, $, 18kg $K_2$O and 200kg lime per l0a showed higher percentage of productive culm and increased yield of crude fiber about 33%. The variation among treatments was relatively small in stem length but larger in fresh weight of shoot and stem. The variation was large at early stage of experiment, that is, from one to two years after planting, but decreased progressively from three years after planting. There was no large difference in number of stems among application rates of fertilizers from three years after planting which was fully-grown stage. However, increasing in application rate of Nand $K_2$O twice as much as the standard rate had large effect on increasing the percentage of productive culm, and hence increased yield greatly.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.92-101
• /
• 1997

This study was conducted to investigate the effect of fly ash on the yield and quality and to determine the optimum application amount of fly ash for tobacco(Nicotiana tabacum L). Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 20, 40, 60 MT/ha. Dry weights of tobacco at middle and topping growth stage were increased with application of fly ash, showing the highest dry weight at 40 MT/ha in both kinds of fly ash. It was showed that the bituminous coal had a little more effective for yield than that of anthracite. Comparing with the control, yields of tobacco applied with fly ash were significantly increased about 17.7% and 17.1% by the application of bituminous coal and anthracite, respectively. Quality of flue-cured leaves was better by application of fly ash than that of the control. The quality index was given the highest at 40 MT/ha for bituminous coal increasing by 24.6% and at 60 MT/ha fur anthracite increasing by 13.4% compared with the control. The economical efficiency considered of the yield and quality of tobacco was the highest at 40 MT/ha of bituminous. Soil pH, contents of available P2O5, organic matter, exchangeable Ca2+ and Mg2+ of soil during the growing season were increased by application of fly ash, showing more effectiveness in bituminous than that in anthracite. By the application of fly ash, the nutrients availability and the acidity of soil were reformed and they caused significantly the increase of growths yield, and quality of tobacco. By the application of lime reforming soil acidity, growth response, yields and quality of tobacco were not increased compared to the control, although the effect of reforming soil pH was remarkable.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.77-84
• /
• 2011

Purpose: The objectives of this study were to determine the enhancing effect of iontophoresis method as it transdermally deliver methylene blue (MB) using visual examination, in terms of penetration depth and tissue distribution in the skin, and to determine the effect of application duration on the efficacy of iontophoresis. Methods: Twenty-four male Sprague-Dawley rats were randomly divided into 5-, 10-, 20-, and 40-minute groups. These rats were exposed to either topical or anodic iontophoresis of 1% MB using a direct current of $0.5mA/cm^2$ for 5, 10, 20, and 40 minutes. Using cryosections of rat tissues, the penetration depth of MB was measured using light microscopy. Results: Significant differences in the penetration depth (F=54.20, p<0.001) were detected among the four groups. Post hoc comparisons of the penetration depth of MB data pooled across groups showed no significant difference between all topical application groups and 5-minute iontophoresis group, but did reveal a significant difference in the penetration depth between all topical application groups and 5-minute iontophoresis group versus 10-minute group, between the 10-minute and 20-minute group, and between the 20-minute and 40-minute iontophoresis group (p<0.05). Conclusion: The results demonstrate that iontophoresis enhances transdermal delivery of MB across stratum corneum of skin barrier by visual examination. Furthermore, the penetration depth of iontophoretic transdermal delivery of MB was dependent on the application duration. The duration of iontophoresis is one of the important factor in the efficacy of iontophoresis application.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.225-228
• /
• 2002

Bcl-2 is a member of large bcl-2 family and protects cells from apoptosis. Using bcl-2-expressing adenovirus vector (Ad-bc1-2), we investigated the effect of bc1-2 on UVB-induced apoptosis. Adenovirus vector efficiently introduced bc1-2 gene in cultured normal mouse keratinocytes (NMK cells); almost all NMK cells (lx10$^{6}$ ) were transfected at Ixl0$^{8}$ PFU/ml. Bcl-2-transfected NMK cells were significantly resistant to UVB-induced apoptosis with the suppressive effect dependent on bcl-2-expression level. Following UVB irradiation caspase 8, 3, 9 activities were stimulated in NMK cells, while in bc1-2-transfected cells, only caspase 8, but not caspase 3 or 9 activities were stimulated. In order to investigate the effect of bc1-2 in vivo, topical application of Ad-bc1-2 on tape-stripped mouse skin was performed. Following the application, Bc1-2 was efficiently overexpressed in almost all viable keratinocytes. The expression was transient with the maximal expression of Bc1-2 at 1st day following the application of lxl0$^{9}$ PFU in 200ml. The introduced Bc1-2 remained at least for 6 days. UVB irradiation (1250 J/m$^2$) induced apoptosis within 12 h and the maximal effect was observed at 24 h in control mouse skin. Bc1-2-transfected mice skin were resistant to UVB-induced apoptosis. Topical application of empty adenovirus vector alone had no effect on Bc1-2 expression or UVB-induced apoptosis. These results indicate that adenovirus vector is an efficient gene delivery system into keratinocytes and that Bcl-2 is a potent inhibitor of UVB-induced apoptosis both in vitro and in vivo.

• The Journal of Korean Physical Therapy
• /
• v.16 no.2
• /
• pp.116-127
• /
• 2004

The purpose of this study was to determine the effect of shoe lift of the affected limb in subjects with hemiplegia. The subjects of this study were 18 post-stroke hemiplegics. For the study, insole of the paretic side was lifted 10 mm higher, and static weight bearing was measured before and after the lift application. For the measurement of carry-over effect of lift, we got data of those three items prior to and 3 weeks after lift application and 3 days after removal of the lift. Static weight bearing was significantly increased both just after and continuous application of lift for 3 weeks than before. According to this study, lift applied to the shoe of the paretic limb was effective in inducing static weight bearing in the paretic limb. This study suggests that symmetry, induced by shoe lift applied to the paretic limb, could help correct abnormal posture that would be caused in standing and prevent development of abnormal muscle tone in subjects with hemiplegia caused by unilateral stroke.

• Journal of Korea Multimedia Society
• /
• v.18 no.3
• /
• pp.349-358
• /
• 2015

Simulating color appearance of makeup effect is an important issue in computer graphics as well as cosmetic industry. Most of previous works on makeup simulation are simple color blending to mimic the cosmetic effects. Some of previous works employed Kubelka-Munk model to accurately simulate the layering effect of cosmetics. However, the simulation limited on single point, and the rest of area are still computed by simple color blending utilizing the color of the single point simulation. This paper presents an image-based method to compute the color appearance effect of makeup application using per-pixel Kubelka-Munk model. Unlike the previous methods, it is possible to compute per-pixel application thickness as well as optical property of cosmetics. The computed thickness pattern can be used in makeup simulation for a more realistic makeup simulation.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.3
• /
• pp.43-49
• /
• 2004

This article reviews R＆D of triple effect cycle developed in Japan. Most of the refrigeration and heat pump technologies are dominated by vapor compressor system. The vapor compressor system, however, is highly concerned with the environmental regulations , as most of the vapor compressor technologies are using CFCs or HCFCs which are known as ozone depleting and global warming gases. As a consequence, refrigeration technologists are trying to invent or to develop an alternative to vapor compressor refrigeration devices. Thermally driven, absorption technology is one of the possible alternatives. At the moment, absorption cycle is most promising technology The paper summarizes briefly the current research and development in advanced technologies of triple effect absorption chiller-heater in Japan.(omitted)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.11
• /
• pp.9-16
• /
• 2010

This paper examines the temperature characteristics of an Optical CT (optical current transformer) using the Faraday effect for measuring high current in a super high voltage-power apparatus. It is performed as follows by the sensor for embodying Faraday effect. $\cdot$ A single-mode optical fiber capable of maintaining a polarization state is used. $\cdot$ A light source is applied at 1310[nm] to a Laser Diode. $\cdot$ The Linear of Faraday effect to a large current is evaluated and $\cdot$ A possible application using an Optical CT was shown. An Influence of Faraday effect to the surrounding temperature measured -40~50[$^{\circ}C$], and the characteristic of the current sensitivity was reported. An application using the results of the temperature compensation system was used in order to compensate for surrounding temperatures. A possibility of applying Optical CT for electric power apparatus was advanced further. We were able to confirm that this temperature calibration method can minimize the fluctuation of the output signal depending on the temperature conditions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1245-1246
• /
• 2004