• Computers and Concrete
• /
• v.7 no.4
• /
• pp.365-386
• /
• 2010

This paper presents the physical formulation of a 1D material model suitable for seismic applications. It is written within the framework of thermodynamics with internal variables that is, especially, very efficient for the phenomenological representation of material behaviors at macroscale: those of the representative elementary volume. The model can reproduce the main characteristics observed for concrete, that is nonsymetric loading rate-dependent (viscoelasticity) behavior with appearance of permanent deformations and local hysteresis (continuum plasticity), stiffness degradation (continuum damage), cracking due to displacement localization (discrete plasticity or damage). The parameters have a clear physical meaning and can thus be easily identified. Although this point is not detailed in the paper, this material model is developed to be implemented in a finite element computer program. Therefore, for the benefit of the robustness of the numerical implementation, (i) linear state equations (no local iteration required) are defined whenever possible and (ii) the conditions in which the presented model can enter the generalized standard materials class - whose elements benefit from good global and local stability properties - are clearly established. To illustrate the capabilities of this model - among them for Earthquake Engineering applications - results of some numerical applications are presented.

• Structural Engineering and Mechanics
• /
• v.35 no.1
• /
• pp.37-52
• /
• 2010

Special-shape arch bridge for self-balance (SBSSAB) in Zhongshan City is a kind of new fashioned spatial combined arch bridge composed of inclined steel arch ribs, curved steel box girder and inclined suspenders, and the mechanical behavior of the SBSSAB is particularly complicated. The SBSSAB is aesthetic in appearance, and design of the SBSSAB is artful and particular. In order to roundly investigate the mechanical behavior of the SBSSAB, 3-D finite element models for spatial member and shell were established to analyze the mechanical properties of the SBSSAB using ANSYS. Finite element analyses were conducted under several main loading cases, moreover deformation and strain values for control section of the SBSSAB under several main loading cases were proposed. To ensure the safety and rationality for optimal design of the SBSSAB and also to verify the reliability of its design and calculation theories, the 1/10 scale model tests were carried out. The measured results include the load checking calculation, lane loading and crowd load, and dead load. A good agreement is achieved between the experimental and analytical results. Both experimental and analytical results have shown that the SBSSAB is in the elastic state under the planned test loads, which indicates that the SBSSAB has an adequate load-capacity. The calibrated finite-element model that reflects the as-built conditions can be used as a baseline for health monitoring and future maintenance of the SBSSAB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.339-342
• /
• 1998

Ferroelectric L $a_2$ $Ti_2$ $O_{7}$(LTO) thin films were prepared by chemical solution deposition processes. Acetylacetone was used as chelating agent and nitric acid was added in the stock solution to control hydrolysis and condensation reaction rate. The LTO thin films were spin-coated on Pt/Ti/ $SiO_2$/(100)Si and Pt/Zr $O_2$/ $SiO_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. The role of acetylacetone in Ti iso-propoxide stabilization by possibly substituting $O^{i}$Pr ligand was studied by H-NMR. B site-rich impurity phase, i.e. L $a_4$ $Ti_{9}$ $O_{24}$, was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results were compared between modified sol-gel and MOD processes.s.s.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.2
• /
• pp.72-81
• /
• 1989

Antheraea yamamai vitellin was purified from matured eggs by polyacryamide gel electrophoresis, also stage dependent appearance, immunological comparison and relative content of the protein were investigated. 1. Vitellogenin, the precursor of vitellin, was first detected in the larval hemolymph at the late spinning stage by polyacrylamide gel electrophoresis and immunoelectrophoresis. 2. The electrophoretic mobility of the vitellin was identical with that of Bombyx mori and of Bombyx mandarina. However, the specific antiserum against A. uamamai vitellin did not react with either that of Bombyx mori or Bombyx mandarina in immumo-diffusion test. 3. Relative content of A. yamamai vitellin to the total soluble egg protein was 46.0 percent and did not change till eight days after oviposition. But the content started to decline from ten days after oviposition and was negligible in the five or serventeen month old eggs.

• Corrosion Science and Technology
• /
• v.16 no.3
• /
• pp.141-150
• /
• 2017

Impregnating with quality silicone water repellent on the concrete surface is an effective method of protecting concrete. Quality silicone water repellent has been widely used in the engineering profession because of its desirable properties such as hydrophobicity, keeping concrete breathable and preserving the original appearance of the concrete. The companies in China that produce silicone water repellent are listed. Test methods in the specifications or standards about silicone water repellent in China are summed. The test methods relative to durability of concrete impregnated with silicone water repellent (such as resistant to chloride ion penetration, resistant to alkali, resistance to freezing and thawing and weatherability etc.) and the constructive quality (such as water absorption rate, impregnating depth and the dry velocity coefficient etc.) are compared and analyzed. The results indicate that there are differences among test methods relative to different specifications with the same index and therefore, confusion has ensued when selecting test methods. All test methods with the exception of the method of water absorption rate by using a Karsten flask are not non-destructive methods or conducted in a laboratory. Finally, further research on silicone water repellent during application is proposed.

• Culinary science and hospitality research
• /
• v.23 no.5
• /
• pp.121-128
• /
• 2017

This study investigated the physicochemical, antioxidant activity, and sensory properties of yanggaeng (white bean jelly) prepared with various amounts of maca(Lepidium meyenii) powder. According to the results, $^{\circ}Brix$ value and pH of yanggaeng were decreased significantly by adding maca powder. Moisture contents of groups with 1% and 3% of maca powder were higher than that of control group. At the result of color measurement, L value of groups by the addition of maca powder was lower than that of control group, but b value of groups by the addition of Chinese artichoke powder was higher. Texture measurement score in terms of hardness, chewiness, and brittleness for yanggaeng was decreased significantly by the addition of maca powder. DPPH radical scavenging activity of groups by the addition of maca powder were higher than that of control group. NSA of groups with 7% of maca powder was higher than that of control group. As maca powder increased, antioxidant activity also became bigger. Sensory evaluation scores in terms of after swallowing, appearance, odor, taste, texture, and overall preference of groups with 3% and 5% of maca powder did show significant differences when compared to the control group. The results of this study suggested that addition of 5% maca powder was the best substitution ratio for yanggaeng.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.99-108
• /
• 2016

This study was conducted to investigate the effect of Chinese artichoke powder on the physicochemical properties and the sensory characteristics of yanggaeng. According to the increasing contents of Chinese artichoke powder, the $^{\circ}Brix$ value and pH levels of yanggaeng were significantly decreased whereas the moisture contents of yanggaeng was significantly increased. The result of color measurement shown that L value of groups containing Chinese artichoke powder was lower than that of control group, but a value and b value of groups containing Chinese artichoke powder were higher. Texture measurement score in terms of cohesiveness, chewiness, and brittleness for yanggaeng were significantly decreased according to the levels of added Chinese artichoke powder content. The contents of total polyphenol, DPPH radical scavenging activity, and NSA of groups containing Chinese artichoke powder were higher than those of control group. As Chinese artichoke powder increased, antioxidative activity also became bigger. Sensory evaluation scores in terms of appearance, odor, taste, texture, and overall preference of groups with 2% and 4% of Chinese artichoke powder did not show any significantly differences when compared to the control group. Based on these findings, current study suggest that addition of 4% Chinese artichoke powder was the best substitution ratio for yanggaeng.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.25-30
• /
• 2009

Zirconia($ZrO_2$) has attracted much attention in science and technology because of its high refractive index, high melting temperature, hardness, low thermal conductivity and corrosion barrier properties. And it is widely used as the dental restoration material because of its esthetic appearance. In this research, we analyzed the particle size and composition of the imported dental porcelain for zirconia. And the glass frit was produced. To decrease the glass transition temperature and softening temperature of the glass frit, $Li_2O$ was added into it and the effect of $Li_2O$ on the firing temperature was researched. Then the glass which contains leucite crystal with a high coefficient of thermal expansion(CTE) was manufactured and it was mixed with the glass frit to control the CTE. The phase composition were analyzed using the X-ray diffraction. The morphologies of the samples were observed by the scanning electron microscope. The 4wt% $Li_2O$-added glass frit has the optimal glass transition temperature and softening temperature. And 6 wt% leucite crystal was mixed with the glass frit to control the CTE. From the experimental results of crystallization, the crystal phase was found only leucite crystal.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.654-661
• /
• 2001

In this study, fatigue growth behavior of the transverse crack, which was the most dangerous damage among the various types of rail defects, was investigated using the notched keyhole specimen under constant amplitude loadings. Fatigue limit of smooth specimen in rail steel at R=0 was 110MPa, and the fatigue crack initiation life in the region of the low stress amplitude (ie. long life) occupied the major portion of the total fatigue life. The fatigue strength under variable amplitude loading was converted to the equivalent fatigue strength based upon. Miners rule, which was estimated approximately 9% lower than that under constant amplitude loading. Also, in the low ΔK(sub)rms region ($\leq$21MPa√m), fatigue crack growth rate (da/dN) under constant amplitude loading was higher than that under variable amplitude loading, whereas the tendency was reversed in the high ΔK(sub)rms region. It is believed that this behavior is due to the transition of fracture appearance.