• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.275-281
• /
• 2007

This study was carried out to know bending process property of bentwood by treatment methods such as microwave and ammonia solution treatment. Bentwood processing was operated on bending-jig form with 60mm and 100mm radius of curvature (ROC). The species was used to Korean red pine (Pinus densiflora). No significant difference was shown in bentwood processing method on ROC. In treatment method, ammonia solution treatment for bentwood was better in dimensional stability and working ability than that of microwave treatment. However, bentwood stress was reduced with ammonia solution treatment. Color of bentwood surface appearance has a dark tendency in ammonia solution treatment. But it seems to beautiful effect of apparent annual ring is rising esthetically by ammonia solution treatment. To utilize wood as a exterior material for living amenity, it has to be closely examined from various angles including surface property, degree of swelling and shrinkage, drying state, retaining strength, durability, safety, and insect damage.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2011

In the design of the injection molding process, various parameters including mold design parameters and molding conditions should be investigated to improve part quality. The mold temperature is one of important processing parameters that affect the flow characteristics, surface appearance, part deformation, mechanical properties, etc. Numerical analyses have been used to predict the temperature distribution of the mold under the given cooling or heating conditions. However, conventional analyses have been performed by assuming that the mold material is a single solid even though a number of plates are assembled to construct an injection mold. In the present study, a numerical approach considering the thermal contact resistance is proposed to provide more reliable prediction of the mold temperature distribution by reflecting the heat-resistance between assembled mold plates.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2011

In this study, We investigated the properites of nano-emulsions containing hydrogenated lecithin prepared by high pressure homogenizer. The size of droplet of emulsions prepared by homogenizer at various rpm (rotation per minute) was not measured due to the unstability of emulsions, however, the size of droplet of nano-emulsions prepared by high pressure homogenizer was around 300 nm and the appearance of emulsions was bluish. The stability of emulsions with various lecithin concentration was tested against time. POV (Peroxide value) of emulsions were plotted against time. POVs of emulsions prepared with an egg lecithin and a soy lecithin were increased with time, however, POV of emulsion with Lecinol S-$10^{(R)}$ was kept constant within 60 hours and at $60^{\circ}C$. In consumer test, the nano-emulsion showed higher affinity regardless of skin type. Both of irritation scores of emulsions were similar.

• Transactions of Materials Processing
• /
• v.19 no.3
• /
• pp.191-196
• /
• 2010

Tungsten-carbide as typical difficult-to-cut material has excellent mechanical properties such as high thermal resistivity, mechanical strength and chemical durability. However, it is next to impossible for tungsten-carbide to be fabricated the needed parts by cutting process. In this study, for establishing the micro fabrication method of tungsten-carbide for micro injection or compression molding core, the investigation on micro cutting characteristics of tungsten-carbide green part which is made by powder injection molding process and easy to cut relatively was performed. For this, micro endmilling experiments of tungsten-carbide green part were performed according to various cutting conditions. Finally, the wear trend of micro endmill and the appearance of micro rib according to feed-rate and cutting depth per step were analyzed through SEM images of micro cutting feature and microscope images of micro tools.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.355-358
• /
• 2005

Nitrate-selective ion exchange resins involving bulky trialkyl amino as functional group were synthesized by the reaction of chloromethylated polystyrene-divinylbenzene copolymer and the corresponding tripropylamine in ethanol. Fundmental properties such as bulk density, water content, effeative diameter, uniformity coefficient, appearance index, exchange capacity and particle size distribution were fully measured. The synthesized resins appeared to be good for nitrate selection.

• Korean Journal of Human Ecology
• /
• v.22 no.6
• /
• pp.723-736
• /
• 2013

To examine the quality characteristics of bread made of different amounts of chia seed powder, a functional food ingredient, this study made bread by adding chia seed powder by 1%, 3%, and 5% of the flour weight. When bread dough properties were determined using mixograph, all doughs were appropriate for bread-making. In the evaluation of fermentation rate, the dough with 3% of chia seed powder CS 3 showed the most favorable fermentation rate during the first 60-min fermentation of the bread. According to CrumbScan, the fineness of bread pores were higher in control group than bread loaves containing chia seed powder. The volume of bread in control group was significantly lower than those of other experimental groups. The volume and specific volume were highest when chia seed powder was added by 3%. According to preference analysis, appearance and taste was best in CS 3, showing the highest overall score in preference. Therefore, the optimum amount of chia seed powder is identified to be 3% in bread-making.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.335-338
• /
• 1998

Ferroelectric Sr$_2$(Nb,Ta)$_2$O$_{7}$ (SNTO) thin films were prepared by chemical solution deposition processes. SNTO thin films were spin-coated on Pt/Ti/SiO$_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. B site-rich impurity phase, i.e. [Sr(Nb,Ta)$_2$O$_{6}$], was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results showed a little possibility in ferroelectric gate random access memory devices.s.s.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.575-580
• /
• 2007

Water-soluble, chiral conducting, poly(diphenylamine) (PDPA) nanocomposites were synthesized by chemical oxidative polymerization of diphenylamine in the presence of poly(acrylic acid) (PAA) as a template and camphor sulphonic acid (CSA) as the chiral inductor, Composites were formed as stable aqueous dispersions under different experimental conditions, such as DPA to PAA molar ratios, PAA molecular weight, etc. Circular dichroism(CD) spectra of the composites indicated the induction of chirality to PDPA. Compared to simple chiral PANI, the PDPA/PAA/CSA nanocomposites showed a different Cotton effect. The appearance of a CD band in the composite was complimentary to the bisignate, exciton-coupled band in the UV-Visible spectrum. FTIR spectra indicated the intimate mixing of PDPA and PAA.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.836-839
• /
• 1999

Glossy architectural concrete means high qulity concrete which develops marble-like gloss on the surface of concrete. In spite of many benefits of architectural concrete to R.C. structure such as appearance of natural stone, saving of envelope materials and reduction of building weight, the failure of in-situ application of architectural concrete by the absence of knowledge on the physical properties and form work for it can often be found in Korea. This study is to offer the basic materials on the mix proportion, vibrating, curing and treatment of concrete result from the mock up test and in-situ application of architectural concrete to embody high quality architectural concrete in Korea.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.333-336
• /
• 2006

In general, polymer materials undergo degradation when exposed to ultraviolet radiation, which can cause dissociation of chemical bonds. FRP composites which are used in strengthening existing structure are usually adhered on the concrete surface, its mechanical properties as well as appearance such as color, surface conditions are affected by sunlight and expecially ultraviolet light. In this study, variations of tensile strength after exposure for certain period of time through accelerated exposure by Xe arc methods specified in KS F 2274 are measured in order to examine strength degradation characteristics of FRP composite. As a result of ultraviolet light test for FRP composite after accelerated exposure for 0, 500, 1000, 1500 hour, discoloration of FRP composite occurs according to the passage of time. But, few strength degradations of FRP composite are observed due to exposure of ultraviolet ray with an small variation of tensile strength.